Avoin puoliperävaunu pressullaKRONE
SD 27 ProfiLiner*LiftA*PalKa*Ladebü*
Avoin puoliperävaunu pressulla
KRONE
SD 27 ProfiLiner*LiftA*PalKa*Ladebü*
Kiinteä hinta alv 0% (veroton)
3 900 €
(4 641 € bruttomassa)
Kunto
Käytetty
Sijainti
Steinfeld 

Perustiedot
Hinta ja sijainti
Kiinteä hinta alv 0% (veroton)
3 900 €
(4 641 € bruttomassa)
- Myyjän sijainti:
- Rienshof 2, 49439 Steinfeld, Saksa

Soita
Tekniset tiedot
- Kokonaispaino:
- 36 000 kg
- Akselikokoonpano:
- 3 akselia
- Ensirekisteröinti:
- 04/2015
- Seuraava tarkastus (TÜV):
- 06/2026
- Kokonaisleveys:
- 2 550 mm
- Kokonaiskorkeus:
- 4 000 mm
- Varusteet:
- ABS
Tarjouksen tiedot
- Ilmoituksen tunnus:
- A219-69-883
- Viitenumero:
- 13933 / AP 613
- Päivitys:
- viimeksi 21.05.2026
Kuvaus
VIN: WKESD00000656713
Distance from kingpin to center of support device: 2,267 mm
Fifth wheel height unladen: 1,150 mm
Double-T longitudinal and center beams, as well as outer frame with crossbeams and outriggers, welded together
Adjustable in increments of 100 mm
Multilock outer frame
Universal load securing design, front: 125 mm (incl. floor and fifth wheel plate)
2" kingpin (corner dimension: 2,040 mm)
For cargo area length: 13,620 mm i.L.
For cargo area width: 2,480 mm i.L.
3 axles, each with 9,000 kg load capacity
Axle spacing: 7,480 mm
Track: 1,310 / 1,310 mm
KRONE axles with air suspension and disc brake, offset 120
Brake disc with 430 mm diameter
With lifting and lowering device, incl. automatic ride height adjustment
Load-dependent, fully automatic electronic lift axle control for 1st axle
Manual function on control panel for forced lifting
(= driving assistance system according to Directive 97/27/EC) and forced lowering
Preparation of lift/trailing axle(s) for operation from the tractor unit (without tractor unit installation),
according to selected connector(s) for light,
for control via
? Contact 6 of the 7-pole auxiliary connector - ISO 3731 and/or
? Contact 12 of the 15-pole connector - ISO 12098 and/or
? Contact 8 A of the VBG connector
Tires 6 x 385/65 R 22.5
Tread depths
Tire L/R
Kledoy Tr T Njpfx Ahlet
1st axle 9/7 mm
2nd axle 7/7 mm
3rd axle 8/10 mm
Steel corner posts at the rear, externally in a trapezoidal box design
Delta rubber frame profile at the rear, transversely on the rear frame
1 toolbox, plastic, surface load max. 50 kg,
externally approx. 650x490x450 mm, in front of the axle unit on the left
Pallet stop on the side rail, left, welded, approx. 30 mm high
Loading height reduced by the pallet stop
Cargo area width in the area of the pallet stop reduced to: 2,460 mm i.L.
Loading platform, manufacturer: MBB, can be driven under, load capacity: 2000 kg
Load distance: 750 mm
Platform size: approx. 2,400 x 1,710 mm (width x height)
With double roll-off protection
Foot operation
Power supply for loading platform operation via the tractor unit
via a 2-pole round contact socket (Rema)
Warning flashing lights on the loading platform
Type: BO 13620 B
30 mm thick, waterproof plate floor, cut surfaces sealed all around, continuous, waterproof gluing
between chassis and floor plate with permanently elastic high-performance adhesive. Strength according to DIN 283, for floor loads up to max. 7,000 kg forklift axle load.
Upon request, customs license plates and insurance can be provided for an additional charge! For export business, we can, upon request, carry out the export declaration and approval for you against reimbursement of costs. When exporting to third countries, a deposit of 19% of the purchase price will be retained. This will be refunded to the buyer after successful customs clearance or delivery.
For further information, please contact Mr. Lübberding on mobile/WhatsApp. Always make an appointment for inspection/test drive! Just take a look at us. We are looking forward to your visit.
----The information provided on the internet is a non-binding description. It does not constitute a guaranteed characteristic.
Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.
Distance from kingpin to center of support device: 2,267 mm
Fifth wheel height unladen: 1,150 mm
Double-T longitudinal and center beams, as well as outer frame with crossbeams and outriggers, welded together
Adjustable in increments of 100 mm
Multilock outer frame
Universal load securing design, front: 125 mm (incl. floor and fifth wheel plate)
2" kingpin (corner dimension: 2,040 mm)
For cargo area length: 13,620 mm i.L.
For cargo area width: 2,480 mm i.L.
3 axles, each with 9,000 kg load capacity
Axle spacing: 7,480 mm
Track: 1,310 / 1,310 mm
KRONE axles with air suspension and disc brake, offset 120
Brake disc with 430 mm diameter
With lifting and lowering device, incl. automatic ride height adjustment
Load-dependent, fully automatic electronic lift axle control for 1st axle
Manual function on control panel for forced lifting
(= driving assistance system according to Directive 97/27/EC) and forced lowering
Preparation of lift/trailing axle(s) for operation from the tractor unit (without tractor unit installation),
according to selected connector(s) for light,
for control via
? Contact 6 of the 7-pole auxiliary connector - ISO 3731 and/or
? Contact 12 of the 15-pole connector - ISO 12098 and/or
? Contact 8 A of the VBG connector
Tires 6 x 385/65 R 22.5
Tread depths
Tire L/R
Kledoy Tr T Njpfx Ahlet
1st axle 9/7 mm
2nd axle 7/7 mm
3rd axle 8/10 mm
Steel corner posts at the rear, externally in a trapezoidal box design
Delta rubber frame profile at the rear, transversely on the rear frame
1 toolbox, plastic, surface load max. 50 kg,
externally approx. 650x490x450 mm, in front of the axle unit on the left
Pallet stop on the side rail, left, welded, approx. 30 mm high
Loading height reduced by the pallet stop
Cargo area width in the area of the pallet stop reduced to: 2,460 mm i.L.
Loading platform, manufacturer: MBB, can be driven under, load capacity: 2000 kg
Load distance: 750 mm
Platform size: approx. 2,400 x 1,710 mm (width x height)
With double roll-off protection
Foot operation
Power supply for loading platform operation via the tractor unit
via a 2-pole round contact socket (Rema)
Warning flashing lights on the loading platform
Type: BO 13620 B
30 mm thick, waterproof plate floor, cut surfaces sealed all around, continuous, waterproof gluing
between chassis and floor plate with permanently elastic high-performance adhesive. Strength according to DIN 283, for floor loads up to max. 7,000 kg forklift axle load.
Upon request, customs license plates and insurance can be provided for an additional charge! For export business, we can, upon request, carry out the export declaration and approval for you against reimbursement of costs. When exporting to third countries, a deposit of 19% of the purchase price will be retained. This will be refunded to the buyer after successful customs clearance or delivery.
For further information, please contact Mr. Lübberding on mobile/WhatsApp. Always make an appointment for inspection/test drive! Just take a look at us. We are looking forward to your visit.
----The information provided on the internet is a non-binding description. It does not constitute a guaranteed characteristic.
Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.
Toimittaja
Huomautus: Rekisteröidy ilmaiseksi tai kirjaudu sisään, saadaksesi kaikki tiedot.
Rekisteröitynyt vuodesta: 2009
41 Verkkoilmoitukset
Lähetä kysely
Puhelin & Faksi
+49 5492 ... ilmoitukset
Ilmoituksesi on poistettu onnistuneesti
Tapahtui virhe














































