Työalustallinen puoliperävaunu

ES-GE 3-Achs Sattelanhänger - Bordwände + CV

You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website.

Excerpt from the equipment list. Complete equipment list available upon request.

Chassis:
* Welded construction made of high-quality steel profiles with continuous profile crossmembers, designed for high point loads. Underride guard width approx. 700 mm, outer frame as UNP profile, wear plate approx. 8 mm, front goose neck height approx. 130 mm

Fifth wheel coupling:
* 2-inch kingpin

Underride protection:
Kodpey Tgdiefx Akwolt
* Bolted design, according to EC

Side underride protection:
* According to EC, made of aluminum profiles, anodized

Fifth wheel supports:
* 2 x 12 t fifth wheel supports with leveling foot and single-side operation on the right side

Axles:
* 3 x 9 t air suspension axle assembly, disc brakes 22.5", total travel approx. 180 mm, lifting and lowering device via rotary slide valve

Braking system:
* Two-circuit compressed air braking system according to EC with EBS and RSS, automatic load-dependent regulation, spring brake cylinders as parking brake, interlock-protected coupling heads firmly mounted on the front crossmember, without connecting line to the tractor unit

Tires:
* 6, 385/55 R22.5 160J on steel rim 11.75 X 22.5 ET 120, manufacturer of our choice
* Tire pressure monitoring system (TPMS) via CAN bus system of the EBS

Fenders:
* According to EC

Spare wheel holder:
* None

Load securing:
* 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 5.0 t
* 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 2.0 t
* In the outer frame, drill holes approximately every 400-600 mm for attaching lashing straps

Front wall:
* Reinforced steel construction, fixed, approx. 1,400 mm high
* Inside lined with approx. 9 mm screen-printed board (approx. 1,250 mm high)

Floor:
* Approx. 28 mm Z-hardwood floor recessed in the outer frame with galvanized omega steel profiles

Lighting system:
* According to EC, 24 volts, with multi-chamber lights, LED side marker lights, LED position lights white at the front, LED outline lights at the rear, license plate lights. LED lane keeping lights
* 1x15- and 2x7-pole connectors on the front crossmember

Equipment:
* 2 wheel chocks with holder
* Warning signs ECE 70
* Holder for rotating beacon, incl. rotating beacon
* Extendable ladder at the rear right (without platform)
* 1 open box made of perforated sheet metal, transverse to the direction of travel, approx. 600 x 450 x 2,430 mm, galvanized, behind the axles

Painting:
* Front wall: DB 7350 novagrau
* Chassis: Hot-dip galvanized
* Outer frame: Hot-dip galvanized + DB 7350 novagrau
* Crossbars: DB 7350 novagrau
* SSV: Aluminum anodized
* Underride protection: white (RAL 9016 traffic white)
* Attachments: galvanized/KTL black
* Rims: silver
* Contour marking: complete yellow

Incl. special accessories:
* First axle liftable, with fully automatic, load-dependent lift control
* 10 pairs of pocket holes in the outer frame, evenly distributed
* 4 rows of pocket holes transverse to the loading area
* 20 pieces of stakes made of galvanized pipe 80/50, total length approx. 1,200 mm
* Inside on the front wall, a magazine for 20 pieces of plug-in stakes
* 5 x 25 mm side boards and rear wall made of anodized aluminum hollow profiles, foldable and removable, removable Kinnegrip stakes
* Side board and stake magazine: sliding rails for side boards and stakes under the chassis on the left and ri

Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.