Kippipuoliperävaunu

WIELTON 3-Achskipper/Alu-Kastenmulde /51 cbm/ Kombitür /

Type:

External length: 11,106 mm
Floor length: 9,890 mm
External width: 2,550 mm
Internal height: 2,100 mm
Track width: 2,040 mm
Fifth wheel height: 1,200 mm
Wheelbase: 1,310 mm
Rear overhang: 1,418 mm
Floor height: 1,525 mm
Height at max. tipping angle: 10,064 mm
Max. cylinder tipping angle: 46°
Unladen weight: 6,100 kg
Volume: 50.8 cbm
Roll tarp: 900g/m²
Water tank: 30 l
Toolbox: 165 l
Aluminum ladder: 2,840 mm
Tension chain between sidewalls
Super Light chassis frame, straight, longitudinal members with recessed kingpin area
Welded structure, weight-optimized made of high-strength S700 steel
Air suspension
Side underrun protection made of aluminum profiles according to ECE 73
2 plastic wheel chocks
Distance kingpin to 2nd axle: 6,810 mm
Axle spacing: 1,310 mm
Rear underrun protection made of steel
Foldable rear underrun protection
Fifth wheel height unladen: 1,200 mm
Number of axles: 3
6x tires 385/65/22.5 Standard (Bridgestone/Hankook)
Without spare wheel rim
6x Aluminum rims ABERG AluPro BRUSHED 22.5x11.75 ET-120
Rigid axles
No axle lift on the 3rd axle
1st lift axle
SAF disc brake axles 3x9000 kg 22.5 INTRADISC CD
2-speed landing gears, full load (BPW Gen2 FL/SAF Hercules)
No spare wheel carrier and winch
Aluminum ladder L=2,840 mm
Toolbox - 165 L (mounted in the middle on chassis, left side)
Water tank - 30 L (mounted in the middle on chassis, left side)
Shovel and broom on chassis above fender
Extendable rear ladder
Front wall inclined 20 degrees
Side walls SL, inside thickness 2.5 mm, fully welded
Internal height 2,100 mm
Double-wing aluminum combi door, aluminum (1/2 + 1/2) vertical with portal beam
2 grain sliders
2 bottom tension locks
Pallet-width version
5 mm floor
Floor crossmember spacing under the floor: 360 mm
Trough damping: Polyp
Tension chain between sidewalls
Operator stand attached to the front wall, access on FR left
PVC roll tarp 680 g/m² with quick-release and aluminum winding tube (with vertical rear closure and extension triangle at front and rear, center tube welded into the tarp)
Reinforced tarp 900g/m²
Brake system: Knorr IVL or Wabco as per manufacturer's choice
Spring pressure gauge
Steel air tank
Control line for lift axle from driver's cab
Gedpfx Apsy Sklbsbeub
Hydraulic connection kit 1"
Hydraulic cylinder, eye mounting above

The system is designed for semi-trailers and trailers and is used to monitor the tire pressure and temperature of the vehicle. Manufacturer: ABERG Connect. The system consists of TPMS sensors (tire pressure and temperature) mounted on the rims and a device connected to the EBS.
No tire pressure sensor for spare wheel
Tipping angle indicator

The manufacturer provides a 24-month warranty on the vehicle, subject to the statutory provisions of the respective market.
The warranty applies according to the sales and delivery conditions and requires adherence to the maintenance intervals specified in the warranty booklet.
Warranty period for ON-ROAD/OFF-ROAD products:
- 24 months for the entire product from date of first registration
- 36 months on the vehicle frame from date of first registration (excluding surface rust)
- 10 years warranty against chassis rust-through (understood as rust formation from the inside out)

Export plates and insurance available upon request at extra charge! For export business, we can handle export declarations and registration for you on request for a fee. For exports to third countries, a deposit of 19% of the purchase price applies.

Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.