Avoin puoliperävaunu

FLIEGL Fliegl SZS 270 Mega Plateau

The images shown are archive photos! The vehicle may currently be in use!

2-axle flatbed semi-trailer
Type SZS 270 Mega
RH 95

Weights and Dimensions:
Perm. / technical gross weight: 27,000 kg
Perm. / technical payload approx.: 23,000 kg
Perm. / technical axle load: 16,000 kg
Perm. / technical fifth wheel load: 11,000 kg
Unladen weight approx.: 4,000 kg +/- manufacturing tolerance

Overall length approx.: 13,850 mm
Maximum overall width: 2,550 mm
Overall height approx.: 2,220 mm
Platform length approx.: 13,650 mm
Codpjy Rxmwofx Agdohc
Platform width approx.: 2,480 mm
Fifth wheel height approx.: 950 mm
King pin installation measurement approx.: 1,680 mm
Front corner dimension approx.: 2,040 mm

Vehicle consists of:
Chassis: Spedition semi-trailer frame
Fine-grain steel welded construction, fifth wheel plate with replaceable 2" king pin
Outer frame with "Load-Lock profile" for lashing strap attachment, note: to attach straps when side walls are fitted, the side walls must be opened!
14 pairs of lashing rings, each rated to 2.5 t
24-t, 2-speed landing gear, operated from one side, with straight base, without equalizer
Without support legs
Wheel chocks with holder
Side underrun protection, aluminium
Rear underrun protection, steel
Quarter-shell mudguards

Axles & Suspension:
SAF disc brake axles
Air suspension

Braking system:
2-line compressed air braking system
Spring-loaded parking brake
2 fail-safe coupling heads at front, without connecting line
EBS, electronic braking system with EBS socket front, without connection cable
Attention: The trailer may only be towed by tractors capable of ensuring the ABS functions correctly!
With raise & lower valve
Vehicle stability system

Wheels and Tyres:
385/55 R19.5” – make according to manufacturer’s choice
Steel rims, factory silver

Electrics:
24 Volt, multi-chamber tail lights, amber LED side marker lamps
2 white position lights at the front with protective bar
2 white/red lane marker lights at the rear
2 x 7-pin fail-safe sockets at front, without connection cable

Floor:
Anti-slip phenolic plywood floor approx. 30 mm thick, cross joints with Omega insert, on longitudinal beams for high point load capacity, suitable for forklift axle loads up to max. 7,100 kg
Note: Floor warping due to weather influences possible!

Front bulkhead/corner posts:
25 mm aluminium hollow profile, approx. 1,350 mm high, corner posts made of steel, high volume design, with “holes” for forklift drivers

Approval / Markings:
Germany
With Dekra inspection and certificate
24/7 service hotline
Prepared for one-line license plate holder
Warning sign according to ECE-70
Conspicuity markings with reflective tape according to ECE R 048; side in white, rear in red

Painting:
Frame: RAL 3002 carmine red
Landing gear: Black coated

The images shown are archive photos! The vehicle may currently be in use!

Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.