Avoin puoliperävaunu pressulla

KRONE SDP27 Plane Standard Edscha RSAB Liftachse Multi

Krone SDP27 Standard Curtain Side Trailer
Edscha RSAB Multilock Outer Frame, Lift Axle
Pallet box for 32 Euro pallets

Perm. total weight: 36,000 kg
Curb weight: 6,721 kg
Payload: 29,279 kg
Fifth wheel height, unladen: approx. 1,150 mm
Loading height: approx. 1,194 mm
BPW axles
1st axle lift axle
Air suspension
Disc brakes
Edscha sliding roof
Welded-on belt tarp, sliding curtain right and left
Portal rear doors
Rear underrun protection
2x crank landing legs
Access ladder rear right
1x storage box left
1x storage box right
Forklift accessible
Metal bump stops
Multilock outer frame
2x LED reversing lights
Customs cord
Slat depot left and right
Pallet box for 32 Euro pallets
1x ADR sign, orange, folding, no numbers
1x “A” warning sign, folding, white, for waste transport
4 pairs of ferry lashings
RSAB RoofSafetyAirBag IceProtect Air— inflatable tube under the roof tarpaulin
Krone Telematics KSC Dry 2
Multi Strap incl. 10 pairs of strap holders
ABS
EBS
ALB
DIN EN 12642 Code XL
Wheelbase: approx. 6,500 + 1,310 + 1,310 mm
Cargo area (LxWxH): approx. 13,620 x 2,480 x 2,786 mm
External dims (LxWxH): approx. 13,950 x 2,550 x 4,000 mm
Rear door through-loading height: 2,700 mm
Rear door through-loading width: 2,480 mm
Tyres: 385/65R22.5 on steel rims
Tread depth front left: 12 mm
Tread depth mid left: 9 mm
Tread depth rear left: 10 mm
Tread depth front right: 10 mm
Tread depth mid right: 9 mm
Tread depth rear right: 8 mm

Further equipment:
2910 SDP 27 eLB4-CS,
Type: SD,
King pin to landing gear midpoint distance only 2,050 mm
Unladen fifth wheel height 1,150 mm
Multilock outer frame, universal cargo securing points every 100 mm
Front construction height: 127 mm (incl. floor and fifth wheel plate)
2" king pin (corner dimension: 2,040 mm)
For internal loading length: 13,620 mm
For internal loading width: 2,480 mm
Rear underrun device as per EC directive
Side collision protection replaced by pallet/storage box
Multi Lash tie-down rings (evenly distributed both sides)
4 pairs of ferry lashings acc. to DIN EN 29367-2
Rear sliding step ladder
Door holder
Two mechanical landing legs, 2 x 12 t, semi-round with base plate
3 axles, each 9,000 kg load capacity
Axle assembly spacing = 7,720 mm
Wheelbase: 1,310 / 1,310 mm
BPW axles with air suspension and disc brakes (ET 120)
With lifting and lowering device incl. automatic ride height reset
Automatic load-dependent lift axle control for the first axle
Dkodpey Rbl Ajfx Aifel
Brake system brand: Wabco
LED side marker lamps with indicator function (flashing)
24 volt, front with 7-pin socket DIN ISO 1185
7-pin socket DIN ISO 3731 front, for additional functions
Additionally, front 15-pin socket DIN ISO 12098
2 extra LED reversing lights
Steel rear corners as trapezoidal box
Delta rubber bumper across rear frame
1 plastic toolbox, max. surface load 50 kg, approx. 650x490x450 mm, behind axle assembly right and left
Closed pallet box for 32 Euro pallets
Toolbox(es) for fire extinguisher mounted centre front wall
Slat depot left side, for 22 insert slats
Slat depot left side, for ...

Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.