Kuorma-autoon asennettu nosturi

VOLVO FH500 6x2 Wechselsystem mit F545RA.2.27 L214

Chassis – New Vehicle: - MODEL 2024

? Manufacturer/Type: Volvo FH500 6x2, wheelbase 3700 mm, VIN: To be provided.
? Please refer to the attached documents for detailed vehicle specifications.
? Oil pump type: LEDUC
? Fifth wheel with sliding mechanism and self-lubricating (Type Jost JSK), mounted on the
auxiliary frame
? Front outrigger cover with company LOGO (laser-cut/smooth steel sheet)
Bedpfx Aaoy Hm Etsvslk

Superstructure:
Crane exchange system:
The superstructure including the crane can be removed, and a fifth wheel is then mounted on the chassis.
The crane and superstructure, including the fifth wheel, can also be used together.
The vehicle has a total of two fifth wheels, each of which can be moved longitudinally.
A crawler would also be available, net price is €149,900.

? Mounting/bolting of the crane and main support beam to the auxiliary frame.
Installation of all hydraulic and electrical connections. Mounting location: Front
? Flatbed design as a removable steel/welded structure
? Length approx. 380 cm, width approx. 248 cm.
? Flatbed painted. Color: RAL (chassis color)
? Removable aluminum side panels, manufacturer Suer, height 600 mm, anodized version with
steps, removable Kinngripp stanchions.
? Standard flatbed floor with welded 4 mm steel diamond plate, painted in RAL (chassis color)
? 6 recessed lashing eyes 2500 daN each side, in slot profile with flexible arrangement.
? 4 lashing brackets for chains 6500 daN (2 at the front and 2 at the rear of the superstructure)
? Sturdy front panel consisting of a welded frame, welded 4 mm steel sheet and 5 accessory hooks, front panel height approx. 1300 mm, steel version painted, with 2
foldable loops for lashing straps, welded.
? Sheathing panels, mudguards made of aluminum diamond plate (sandblasted, powder-coated and
painted)
? Multifix stanchion pockets, 2 rows, spaced approx. 80 cm from the front and rear.
? Brackets (for support plates, crane plates) made of galvanized steel.
? Additional support mounted under the chassis.
? Mounting of an underrun protection at the rear and the additional support, with installation
of hydraulic and electrical connections.
? Duomatic and red/yellow couplings, at the front for semi-trailers and at the rear for
trailers

? New crane, type FASSI F545 RA 2.27 endlessly rotating, fully mounted, installed and
parameterized, with 7 hydraulic outriggers and JIB L214 with 4 hydraulic outriggers.
? Please refer to the attached documents for detailed crane specifications.
? Series 5450
? The initial TÜV-UVV inspection and parameterization of the crane will be carried out in accordance with the technical
specifications and load charts of FASSI crane manufacturer.

Additional equipment and crane accessories:
? 5 x crane support plates with brackets, arrangement according to the manufacturing drawing.
? AWC (automatic rope length control)
? Operating instructions, maintenance manual and crane inspection book.
Lighting:
? 2 x LED AS integrated in the front panel
? 2 x rotating beacons on the FH roof
? 2 x flashing lights in the hood
? 2 x LED under the superstructure at the rear, one on each side, arrangement to be agreed.
? 4 x LED AS, 2 on the left and 2 on the right, mounted under the superstructure in the area of the support legs.
? 4 x yellow LED light strips, one mounted on each support.

Further information is available on request.

Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.