Erikoiskäyttöinen kuorma-auto

VOLVO FH500 6x2 Wechselsystem mit F545RA.2.27 L214

Chassis – New Vehicle: – MODEL 2024

• Manufacturer/Model: Volvo FH500 6x2, Wheelbase 3,700 mm, VIN: To be provided.
• For detailed vehicle specifications, please refer to the attached documents.
• Oil pump type: LEDUC
• Fifth-wheel plate with sliding function and self-lubricating (type Jost JSK), mounted on the subframe
• Front stabilizer cover with company logo (engraved/plain steel sheet)

Body:
Crane Exchange System:
The superstructure, including crane, can be dismantled, and a fifth-wheel plate is then mounted on the chassis.
Lhjdpfjy E A Smex Akfsf
The function of crane and superstructure, including fifth-wheel plate, is also possible.
The vehicle features two fifth-wheel plates in total, each longitudinally adjustable.

• Assembly/bolting of the crane and main support beam to the subframe. Installation of all hydraulic and electrical connections. Mounting position: front
• Platform body as removable steel/welded construction
• Approx. length: 380 cm, width: 248 cm
• Platform superstructure painted, color shade RAL (chassis color)
• Removable aluminium drop sides, Suer make, height 600 mm, anodised finish with integrated steps, removable Kinngripp stanchions
• Standard platform floor with welded 4 mm steel checker plate, painted to RAL (chassis color)
• 6 recessed lashing rings, 2,500 daN per side, in perforated profile with flexible arrangement
• 4 x lashing points for chains, 6,500 daN (2 at the front and 2 at the rear of the body)
• Robust front bulkhead, consisting of welded frame and 4 mm welded steel plate with 5 accessory hooks, approx. 1,300 mm high, steel painted, with 2 folding lashing points (welded) for tie-down straps
• Cladding panels and mudguards made from aluminium chequer plate (sandblasted, powder-coated, and painted)
• Multifix stanchion pockets: 2 rows, approx. 80 cm spaced from bulkhead and rear end
• Holders (for stabilizer pads, crane plates) made from galvanized steel
• Additional stabilizer beneath the chassis
• Rear underrun protection and auxiliary stabilizer installed, including hydraulic and electrical connections
• Duomatic and red/yellow connections at the front for semi-trailer, as well as at the rear for trailers

Crane:
• New crane: FASSI F545 RA 2.27, continuous rotation, fully mounted, installed, and parameterized, with 7 hydraulic extensions and JIB L214 with 4 hydraulic extensions
• Please refer to the attached documents for detailed crane specifications
• Series 5450
• Initial TÜV-UVV inspection and parameterization of the crane according to FASSI regulations and load charts

Additional Equipment and Crane Accessories:
• 5 x crane support plates with holders, arrangement per production drawing
• AWC (Automatic Cable Length Control)
• User manual, maintenance manual, and crane inspection book

Lighting:
• 2 x LED position lights integrated in the bulkhead
• 2 x beacons on the FH roof
• 2 x strobe lights in the engine bonnet
• 2 x LED under the body at the rear, left and right – positioning as agreed
• 4 x LED auxiliary lights, 2 each left and right under the body, in the stabilizer leg area
• 4 x yellow LED light strips, 1 on each stabilizer

Further information is available upon request.

Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.