Avoin puoliperävaunu pressullaDINKEL
3-Achs-Sattelanhänger, Pritsche+Plane, LBW
Avoin puoliperävaunu pressulla
DINKEL
3-Achs-Sattelanhänger, Pritsche+Plane, LBW
Kiinteä hinta alv 0% (veroton)
26 950 €
(32 070 € bruttomassa)
Kunto
Käytetty
Sijainti
Essen 

Perustiedot
Hinta ja sijainti
Kiinteä hinta alv 0% (veroton)
26 950 €
(32 070 € bruttomassa)
- Myyjän sijainti:
- Heegstraße 6-8, 45356 Essen, Saksa

Soita
Tekniset tiedot
Mitat ja paino
Kokonaispaino:
42 000 kg
Maksimi kuormauspaino:
31 710 kg
Akselit ja pyörät
Akselikokoonpano:
3 akselia
Turvaominaisuudet
ABS
Dokumentointi ja sertifiointi
Seuraava tarkastus (TÜV):
04/2027
Lisätietoja
Ensirekisteröinti:
10/2016
Tarjouksen tiedot
- Ilmoituksen tunnus:
- A217-46-438
- Viitenumero:
- 37809
- Päivitys:
- viimeksi 07.08.2026
Kuvaus
You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. The following is an excerpt of the equipment. Complete equipment list available upon request.
Knjdey Dy Ehepfx Abuec
Chassis with wedge-shaped design. Increased point load of approximately 25,000 kg over approximately 5,000 mm. 24,000 kg telescopic support winches with load and fast-speed settings. Lashing points in 5,000 kg, 6,000 kg, and 10,000 kg versions. 8 stake pockets (for 2 front walls). Aluminum roof rail with sliding cover. Rear stakes extendable to approximately 3,500 mm, for loading and unloading purposes only. Three sliding stakes per side. End stakes extendable laterally in the direction of travel. Front wall designed as a storage area with integrated shelving system, closed on the inside. DINKEL lift roof, mechanically adjustable in height, lift roof height 400 mm, operable on both sides or on one side. Additional height adjustment of 480 mm in 40 mm increments (12 x 40 mm) with height adjustment in the stakes. Trailer can be driven under tarpaulin up to a total height of approximately 4,400 mm (open at the rear above the loading platform). Upper portal crossbeam with sliding cover, movable. Four rows of stackable 150 mm aluminum slats on the side (only 2 rows of slats in the upper bunk), 450 mm pockets at the bottom, 4 rows of pockets above, even spacing between them. WABCO air brake system with EBS according to EC standard 71/320 EEC including PREV. Air suspension in ECAS version, with lifting and lowering function. Wabco Smart Board with engine load display and lift odometer. 3 x 10,000 kg SAF axles with drum brakes. 3rd axle as a friction-jointed trailing axle. 1st axle can be lifted. Tires 235/75 R 17.5. Dhollandia heavy-duty lift platform type DHLSU, load capacity 9,000 kg, load distance 1,000 mm, steel platform approximately 3,000 x 2,500 mm. Hydraulic additional support, automatic ground leveling. Loading platform with ramp function for inclining the platform, for use as a drive-up ramp, loadable up to a maximum of 13,500 kg. Chassis painted in mb-novagrau. Body painted white. Tarpaulins with customer lettering!
Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.
Knjdey Dy Ehepfx Abuec
Chassis with wedge-shaped design. Increased point load of approximately 25,000 kg over approximately 5,000 mm. 24,000 kg telescopic support winches with load and fast-speed settings. Lashing points in 5,000 kg, 6,000 kg, and 10,000 kg versions. 8 stake pockets (for 2 front walls). Aluminum roof rail with sliding cover. Rear stakes extendable to approximately 3,500 mm, for loading and unloading purposes only. Three sliding stakes per side. End stakes extendable laterally in the direction of travel. Front wall designed as a storage area with integrated shelving system, closed on the inside. DINKEL lift roof, mechanically adjustable in height, lift roof height 400 mm, operable on both sides or on one side. Additional height adjustment of 480 mm in 40 mm increments (12 x 40 mm) with height adjustment in the stakes. Trailer can be driven under tarpaulin up to a total height of approximately 4,400 mm (open at the rear above the loading platform). Upper portal crossbeam with sliding cover, movable. Four rows of stackable 150 mm aluminum slats on the side (only 2 rows of slats in the upper bunk), 450 mm pockets at the bottom, 4 rows of pockets above, even spacing between them. WABCO air brake system with EBS according to EC standard 71/320 EEC including PREV. Air suspension in ECAS version, with lifting and lowering function. Wabco Smart Board with engine load display and lift odometer. 3 x 10,000 kg SAF axles with drum brakes. 3rd axle as a friction-jointed trailing axle. 1st axle can be lifted. Tires 235/75 R 17.5. Dhollandia heavy-duty lift platform type DHLSU, load capacity 9,000 kg, load distance 1,000 mm, steel platform approximately 3,000 x 2,500 mm. Hydraulic additional support, automatic ground leveling. Loading platform with ramp function for inclining the platform, for use as a drive-up ramp, loadable up to a maximum of 13,500 kg. Chassis painted in mb-novagrau. Body painted white. Tarpaulins with customer lettering!
Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.
Toimittaja
Huomautus: Rekisteröidy ilmaiseksi tai kirjaudu sisään, saadaksesi kaikki tiedot.
Rekisteröitynyt vuodesta: 2003
63 Verkkoilmoitukset
Lähetä kysely
Puhelin & Faksi
+49 201 8... ilmoitukset
Nämä ilmoitukset voivat myös kiinnostaa sinua.
Onnistunut
Viestisi on lähetetty.
Pieni ilmoitus
Regensburg
1 666 km
Kuorma-autoon asennettu nosturi
LIEBHERRLTM 1040 KRAN 40 to Nr.: 061
LIEBHERRLTM 1040 KRAN 40 to Nr.: 061
Onnistunut
Viestisi on lähetetty.
Pieni ilmoitus
Öhringen
1 738 km
Vakio vetoauto
MERCEDES-BENZActros 1843 LS MP4 *EURO.6+2xKLIMA+Nebenantrieb*
MERCEDES-BENZActros 1843 LS MP4 *EURO.6+2xKLIMA+Nebenantrieb*
Onnistunut
Viestisi on lähetetty.
Pieni ilmoitus
Dortmund
1 603 km
Perävaunu, jossa on lava-alusta ja pressu
MAX Trailer3-Achs-Jumbo-Semi-Rampen-Planenaufbau
MAX Trailer3-Achs-Jumbo-Semi-Rampen-Planenaufbau
Onnistunut
Viestisi on lähetetty.
Pieni ilmoitus
Aichach
1 756 km
Roll-off-kippi kuorma-auto
MERCEDES-BENZ4144 Actros MP2 Abrollkipper 8x8 Singlebereifung
MERCEDES-BENZ4144 Actros MP2 Abrollkipper 8x8 Singlebereifung
Onnistunut
Viestisi on lähetetty.
Pieni ilmoitus
Langgöns
1 645 km
Vakio vetoauto
Mercedes-BenzActros 1842 4x2
Mercedes-BenzActros 1842 4x2
Onnistunut
Viestisi on lähetetty.
Pieni ilmoitus
Friedberg
1 656 km
Avolava kuorma-auto
MANTGS 26.400 /6x2 /Stahltransport / Lift Lenkachse
MANTGS 26.400 /6x2 /Stahltransport / Lift Lenkachse
Onnistunut
Viestisi on lähetetty.
Pieni ilmoitus
Dortmund
1 603 km
Avoin puoliperävaunu pressulla
MAX Trailer3-Achs-Jumbo-Semi-Rampen-Planenaufbau
MAX Trailer3-Achs-Jumbo-Semi-Rampen-Planenaufbau
Onnistunut
Viestisi on lähetetty.
Pieni ilmoitus
Koblach
1 918 km
Avoin puoliperävaunu pressulla
KÖGELSN 24-1 SAF
KÖGELSN 24-1 SAF
Onnistunut
Viestisi on lähetetty.
Pieni ilmoitus
Bruck-Waasen
1 689 km
Hinausauto
MERCEDES-BENZAtego 1330L 4x2 Abschleppwagen Hubbrille TÜV
MERCEDES-BENZAtego 1330L 4x2 Abschleppwagen Hubbrille TÜV
Onnistunut
Viestisi on lähetetty.
Pieni ilmoitus
Firenze
2 231 km
Mega-kapellipuoliperävaunu
KOGELSEMIRIMORCHIO CENTINATO MEGA
KOGELSEMIRIMORCHIO CENTINATO MEGA
Ilmoituksesi on poistettu onnistuneesti
Tapahtui virhe






















































































































































































































