Kippipuoliperävaunu

Thermokippmulde 2-Achsen

Thermo tipper body, 2-axle
Internal length approx. 7,650 mm (7,350 mm + 300 mm, due to external tailgate)
Internal width approx. 2,330 mm
Internal height approx. 1,470 mm
Load volume approx. 25 m³
Maximum overall width 2,550 mm

- BPW EcoDisc axles with disc brakes Ø430 mm (22.5 disc)
- Front axle with automatic lift: raises and lowers depending on load, includes forced lowering and integrated start-up aid with speed limiter (Traction Help Plus)
- Tires 385/65 R 22.5
- Aluminum half-round segment body, floor thickness 6 mm (continuous floor plate), wall thickness 6 mm, front and rear wall inclined, flush with top edge
- Continuous Hardox steel wear plate 3 mm thick, approx. 2,430 mm wide, with welded-on aluminum edging
- Thermal insulation according to DIN 70001: R-value 1.65 m²K/W (at 20°C), complete body insulation approx. 50 mm thick with 1 mm aluminum cladding or 3 mm at rear wall, fully sealed
- High-pressure front-mounted cylinder for rear tipping, tipping angle approx. 50 degrees (ground clearance when tipped approx. 650 mm)
- Plastic roll tarpaulin including aluminum tube and hand crank
- Partially LED rear lights
Iaedpfx Afey Dyucjter
- Additional LED reversing spotlights
- Broom/shovel holder mounted laterally on the longitudinal beam

All information provided without guarantee. Subject to errors and prior sale.

Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.