3-puoleinen kippauslaite

MAN TGM 18.320 4x2 BL Krankipper Fassi 195

- Work lights, rear
- Heated exterior mirrors
- Heated mirrors
- Passenger seat
- Differential lock
- Automatic climate control
- Air-suspended seats
- Power Take-Off (PTO)
- Radio/Multimedia system
- Rotating beacon
- Rearview camera
- Seat heating
- Sun visor
- Lane keeping assist
- Stability control
- Windshield

Internal number for customer inquiries: 4-028

MAN TGM 18.320 4x2 BL with PAVIC 3-sided tipper body and Fassi loading crane

Vehicle:

MAN TGM 18.320 4X2 BL loading crane tipper
Cab CC: the compact cab (narrow, short, normal height)
Wheelbase 3,875 mm
Suspension: leaf spring/air
Drive: 4x2
Tires: Front axle 2x 295/80R22.5, Rear axle 4x 295/80R22.5
Gross vehicle weight: 18,000 kg
Automatic transmission: MAN TipMatic 12 12 OD
Diesel engine: MAN D0836 LFLAP, 235 kW (320 hp) output, 1,250 Nm torque, Euro 6e
Transmission functionality: EfficientRoll
Cruise control
Differential lock in rear axle
Control panel: MAN EasyControl, 4 functions, operable from the outside when the door is open
Trailer coupling: RINGFEDER Type 4040/G150B
Brake connection: 2-line connection at the end of the frame
Sun visor in front of windshield
Central locking with remote control
MAN Media System Navigation Advanced 7 inch
Rear and wide-angle mirrors, heated and electrically adjustable
Driver comfort seat, air-suspended, with lumbar support, shoulder adjustment, and heating
Height adjustment for safety belt, driver's seat
2 work lights on cab roof
2 halogen rotating warning lights on cab roof
MEILLER axial pump 270/45
Control for tipper body in the cab

Body:

PAVIC 3-sided tipper body 4200x2420 mm
Headboard height 800 mm
Side board height 600 mm
8x lashing eyes, fully retractable in the body floor (4 per side)
Material: Hardox 450
Support for horizontal placement of the side board with rubber support (long goods transport)
Springs as side board lifting aid for easier opening and closing
2x eyelets on the front wall (e.g. for attaching a vibratory plate or grab)
Tipper with hot-dip galvanizing and side boards etc. painted completely with 2K truck paint in RAL9016
Auxiliary frame galvanized and painted in RAL 9011
Left and right side made of one piece, can be opened on both sides by pneumatics with air valve from the cab, opening on all sides from below (pivoting), manually from top to bottom, center supports removable.
Springs as side board lifting aid for easier opening and closing
and more

Note: Body additional equipment: Prepared locations in the pillars for the subsequent installation of a leaf grid (side board attachments PLUS 500mm for e.g. pruning transport) -> in stock

Loading crane:

FASSI F195A.2.24 e-dynamic
Lifting moment 162 kNm (16.51 mt)
Hydraulic four-part extension 12.7 m
e-dynamic hose equipment for 2 auxiliary devices
Gsdpfx Amsylx H Ssnsuh
Slewing range 400°
Double knuckle system with PROLINK (overextending knuckle arm up to 15°)
Electronic overload cut-out system with FX 500
FASSI stability control FSC incl. LMB II
Fassi RCS Funk maxi - 6 functions with 3 joysticks (2-2-2)
Special outriggers, outrigger width 6.64m hydraulically extendable incl. FSC
Outriggers can be operated by radio
FL-System (Full Lift) switchable quick-action valve for the extensions
LED work lights

This is a...

Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.