KippipuoliperävaunuSCHMITZ CARGOBULL
28,2m³ Stahlmulde mit Rollplane
Kippipuoliperävaunu
SCHMITZ CARGOBULL
28,2m³ Stahlmulde mit Rollplane
kiinteä hinta ei sisällä ALV
33 500 €
(39 865 € bruttomassa)
Valmistusvuosi
2026
Kunto
Uusi
Sijainti
Egestorf 

Näytä kuvat
Näytä kartta
Perustiedot
Hinta ja sijainti
kiinteä hinta ei sisällä ALV
33 500 €
(39 865 € bruttomassa)
- Myyjän sijainti:
- Eichenstich 12, 21272 Egestorf, Saksa

Soita
Tekniset tiedot
- Maksimi kuormauspaino:
- 29 740 kg
- Kokonaispaino:
- 36 000 kg
- Akselikokoonpano:
- 3 akselia
- Kuormatilan pituus:
- 7 480 mm
- Lastitilan leveys:
- 2 354 mm
- Kuormatilan korkeus:
- 1 660 mm
- Kuormatilan tilavuus:
- 28 m³
Tarjouksen tiedot
- Listaustunnus:
- A212-53-987
- Viitenumero:
- 6326
- Päivitetty viimeksi:
- 17.02.2026
Kuvaus
Brakes:
* Knorr EBNS brake system with stability program
* Emergency release device for spring-loaded cylinders
* Disc brakes with 430 mm disc diameter
----Axles:
Iajdpfx Aheykx Ndjxsn
* 3 x 9 t SCB axles
* 1st axle liftable (automatic / pneumatic) with electric start assist
----Suspension:
* Air suspension with lifting and lowering system (automatic lowering during tipping operation)
* Analog hubodometer centered on the left
----Electrics / Lighting:
* TrailerConnect service package CTU module
* 2 x 7-pin and 1 x 15-pin power sockets
* LED multifunction tail lights 12 / 24 V with galvanized protective cover
* Dynamic indicators
* 2 additional LED reversing lights
----General attachments:
* Foldable A-board at rear
* Jost landing gear
* Enclosed single plastic mudguards
* Side underrun protection
* Galvanized foldable underrun bar (suitable for paver operation)
* Shunting ring rear left
* Load pressure gauge
----Chassis:
* Weight-optimized chassis frame in a new design made of high-tensile steel
----Tipping body:
* Half-shell rear tipping body made of SCB 450 steel in a new design
* Front wall and tailgate inclined
* Side walls 4 mm
* Floor 5 mm
* Overlapping tailgate with double jointed pendulum bearings and automatic 2-hook lock
* Locking pins for hook fasteners left and right
* All-round sealing with 1 pair of mechanical tension locks
* Access ladder and standing platform in front of front wall
----Tarp:
* Roll tarp – RAL 9005 deep black – with tarp winding profile and side stops
----Hydraulics:
* Hyva hydraulic front ram 170 – 250 bar suitable for low- and high-pressure
----Loading capacity:
* Loading volume 28.2 m³
----Fifth wheel height:
* Unladen approx. 1,250 mm
* Laden approx. 1,220 mm
----Paintwork:
* Tipping body painted in 7350 nova grey
* Chassis painted in Schmitz granite (similar to black-grey)
----Info:
* --Technically permissible gross weight 39,000 kg--
----Availability:
* Immediately available ex Egestorf, near the A7 motorway
Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.
* Knorr EBNS brake system with stability program
* Emergency release device for spring-loaded cylinders
* Disc brakes with 430 mm disc diameter
----Axles:
Iajdpfx Aheykx Ndjxsn
* 3 x 9 t SCB axles
* 1st axle liftable (automatic / pneumatic) with electric start assist
----Suspension:
* Air suspension with lifting and lowering system (automatic lowering during tipping operation)
* Analog hubodometer centered on the left
----Electrics / Lighting:
* TrailerConnect service package CTU module
* 2 x 7-pin and 1 x 15-pin power sockets
* LED multifunction tail lights 12 / 24 V with galvanized protective cover
* Dynamic indicators
* 2 additional LED reversing lights
----General attachments:
* Foldable A-board at rear
* Jost landing gear
* Enclosed single plastic mudguards
* Side underrun protection
* Galvanized foldable underrun bar (suitable for paver operation)
* Shunting ring rear left
* Load pressure gauge
----Chassis:
* Weight-optimized chassis frame in a new design made of high-tensile steel
----Tipping body:
* Half-shell rear tipping body made of SCB 450 steel in a new design
* Front wall and tailgate inclined
* Side walls 4 mm
* Floor 5 mm
* Overlapping tailgate with double jointed pendulum bearings and automatic 2-hook lock
* Locking pins for hook fasteners left and right
* All-round sealing with 1 pair of mechanical tension locks
* Access ladder and standing platform in front of front wall
----Tarp:
* Roll tarp – RAL 9005 deep black – with tarp winding profile and side stops
----Hydraulics:
* Hyva hydraulic front ram 170 – 250 bar suitable for low- and high-pressure
----Loading capacity:
* Loading volume 28.2 m³
----Fifth wheel height:
* Unladen approx. 1,250 mm
* Laden approx. 1,220 mm
----Paintwork:
* Tipping body painted in 7350 nova grey
* Chassis painted in Schmitz granite (similar to black-grey)
----Info:
* --Technically permissible gross weight 39,000 kg--
----Availability:
* Immediately available ex Egestorf, near the A7 motorway
Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.
Toimittaja
Huomautus: Rekisteröidy ilmaiseksi tai kirjaudu sisään, saadaksesi kaikki tiedot.
Rekisteröity alkaen:: 2001
Lähetä pyyntö
Puhelin & Faksi
+49 40 33... ilmoitukset
Ilmoituksesi on poistettu onnistuneesti
Tapahtui virhe




































