Kippipuoliperävaunu

STAS BX 7.5 ALUstar 27m³

Chassis:
Aluminium, reinforced design
Two fully automatically welded I-beam longitudinal members with welded crossmembers, 1,600 mm chassis width

Axles and Suspension - "430 mm off-road disc brakes"
DOA axle assemblies, 3 x 9 t with DC air suspension, first axle liftable with starting aid (Wabco system), Wabco Smart Board, raise and lower valve.

Tyres and Wheels:
6 wheels with GreBe 385/65 R 22.5 tyres, approximately 90-100% tread on ALCOA aluminium rims, 11.75x22.5 ET 120

King Pin:
2" bolted into a 10 mm thick plate

Landing Legs:
Gbsdpsyi Rctofx Ahxsh
1x aluminium drop-leg landing gear for uncoupling the empty trailer

Brake System:
To E.C. standards, two-line Wabco system, spring-actuated parking brake acting on two axles and Wabco EBS-E system with RSS (Roll Stability Support), aluminium air tanks

Electrical System:
Built to StVZO guidelines, with 2x LED five-chamber lights (Aspöck system), 24V installation with two 7-pin sockets and one 15-pin socket, LED side marker lights, 2 separate halogen reversing lamps

Tipping Body / Hopper – Conical Floor Construction:
Aluminium hopper design with trapezoidal floor and rectangular top rail, fully assembled and welded from patented profiles and aluminium plates, side walls of 4 mm aluminium 5086H24, floor 8 mm in a high-abrasion alloy (5383H34), two strong top rail profiles fully welded to the side walls.
Front wall sloped at 20°, 4 mm thick; rear wall approx. 20° slope, swinging tailgate in smooth design without chute, tailgate resting, double-pivot hinges flush with top rail, automatic pneumatic central locking with two locking hooks, tailgate clamps on hopper, rear overhang suitable for paver applications.

Hydraulic System:
Hydraulic cylinder mounted on the front wall, working pressure of 150 bar, with approx. 2.5 m hose and 1" quick-release half-coupling, tipping angle approx. 48-49°

Accessories:
6 Parlok mudguards, 2 "STAS" swinging mud flaps, 2 wheel chocks, robust folding underrun protection with impact guard, 1 central chain, 1 aluminium roof bow, additional inclinable aluminium bow in front of tailgate, 1 plastic toolbox, Cramaro sliding tarpaulin electrically operated with remote control, 2 Ferry eyes at rear frame (for rope attachment), 3 m aluminium ladder, shovel holder inside front wall, nearly new plastic wear linings on side and front walls! (Original cost approx. €5,800), shovel & broom holder left on frame, etc.

Unladen weight: 5,030 kg

Offer and images non-binding.

Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.