Matala lavetti perävaunu

Humbaur HDT 40

The low loader is in immaculate condition and is being replaced due to the purchase of a larger model.

Here are some additional details:

Technical Specifications
Type: 4-axle low loader HTD 40K with wheel recesses
Year of manufacture: 2025
Unladen weight: 10,000 kg
Maximum payload: 30,000 kg
Gross vehicle weight: 40,000 kg
Axle configuration: 2x2
Cargo area length: 9,220 mm
Cargo area width: 2,540 mm
Suspension: Air
Tyre size: 235/75 R17.5
Equipment:
- ABS
- Rotating trailer coupling (40/50 mm pin)
- Turntable plate

Description
HTD 40K-RM-BM_2025
Technical Data:
Internal dimensions: approx. 9,220 mm x 2,540 mm x 0 mm
Overall dimensions: approx. 11,300 mm x 2,540 mm x 3,850 mm
Permissible gross weight: 24,000 kg
Payload: approx. 15,350 kg
Tyres: 235/75 R17.5
Loading height: approx. 900 mm
Drawbar length: approx. 1,500 mm
Coupling height: approx. 820-1,000 mm
Ramp angle: approx. 10°
Ramp length: approx. 3,150 mm
Ramp width: approx. 750 mm
Gross vehicle weight (special approval): 40,000 kg
Payload (special approval): approx. 30,000 kg
Lowered bed length: approx. 6,610 mm
Overall dimensions (LxWxH): 11,200 mm
Technical gross vehicle weight: approx. 40,000 kg
Technical axle load: approx. 10,000 kg
4 pairs of lashing points, 10,000 kg per point
Recessed lashing rings in lowered bed
3 pairs of lashing points, 10,000 kg per point
4 pairs of lashing points, 2,000 kg per point over wheel cutout 3rd and 4th axle
Lashing points on the outer frame of the lowered bed

Standard Equipment:

Axles
- SAF low loader axles
Tyres
- 235/75 R17.5
Suspension
- Air suspension unit with lift and lower function acting on rear axle set
Braking system
- Brake system compliant with EC directives with EBS 4S/3M, multivoltage (12–24V)
- Spring-loaded parking brake including 2 external test via connections for brake/modulator and air bag pressure
Electrics
- LED lighting with flashing function for side marker lights, multivoltage (12–24V)
Turntable
- Heavy-duty welded construction with low-maintenance slewing ring
Towing equipment
- Cranked drawbar with 50 mm & 40 mm towing eye, low-maintenance silent bushings, adjustable height
Frame
- Heavy-duty welded fine-grained steel construction
- Full-length crossmembers for maximum stability
Fjdpeyikq Isfx Ahxjpc
- Wheel recesses front (approx. 2,500 mm long, 410 mm deep) and rear (approx. 1,470 mm long, 370 mm deep) without covers
- Excavator trough (1,650 mm long, 750 mm wide, 190 mm deep)
- Wheel cutouts above rear wheels with 2,010 mm axle spacing, front corners chamfered
- Rear climbing strips on ramp incline for maximum loading/unloading safety
Flooring
- 50 mm softwood decking (painted/impregnated)
Ramps
- One-piece hot-dip galvanized ramps (3,150 mm x 750 mm) with 50 mm softwood decking (painted/impregnated), laterally adjustable, directly operating hydraulic control for easy operation
- Optimum safety via turnbuckle and counterstop
Finish
- Chassis frame hot-dip galvanized in immersion bath
Supports
- 2 hydraulic supports at the rear left and right of the vehicle
Equipment
- Foldable side protection
- Front semi-circular plastic mudguards, rear straight steel mudguards with anti-spray
- 2 wheel chocks with holder
- Contour marking according to ECE Directive R48

Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.