Ikäyvä lattiasemitraileriSTAS
13.50 bioSTAR mit VBK E-Powerplans 93m³
Ikäyvä lattiasemitraileri
STAS
13.50 bioSTAR mit VBK E-Powerplans 93m³
Kunto
Uusi
Sijainti
Korschenbroich-Glehn 

Perustiedot
Hinta ja sijainti
- Myyjän sijainti:
- Dieselstr. 9, 41352 Korschenbroich-Glehn, Saksa

Soita
Tekniset tiedot
Mitat ja paino
Kuormatilan tilavuus:
93 m³
Kuormatilan pituus:
13 535 mm
Lastitilan leveys:
2 480 mm
Kuormatilan korkeus:
2 650 mm
Akselit ja pyörät
Akselikokoonpano:
3 akselia
Tarjouksen tiedot
- Ilmoituksen tunnus:
- A211-98-535
- Päivitys:
- viimeksi 10.02.2026
Kuvaus
Chassis
Version with continuous chassis reinforced, new body manufactured in a self-supporting design with corresponding reinforcements in the lower flange for particularly high stability and
strength, cross member 140 mm high reinforced version (for high ground loads) additional reinforcement as gusset plate in the front lower flange/vehicle frame area, chassis made of galvanized steel up to the support structure, (trailer construction max. 39,000 kg)
Axles and suspension "Disc brake 22.5"
Jost (DCA) axle units version, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard Infocenter, electronic brake wear indicator BVA-readable in the tractor unit (display), 1st axle with traction aid (new EC regulation, without tractor unit equipment), (on request against MP 1st + 3rd axle liftable)
Tires and wheels
6 wheels with tires of size 385/65 R 22 .5 according to manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75?22.5 ET 120
Seatposts
mechanical support winches with two speeds, 2x 20 ton support load with swivel foot,
Braking system
according to E.G. standard?EBS E-system Wabco with RSS system (roll stability support) and premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system,
Hjdpjyh S Aijfx Anvofp
electrical system
according to the guidelines of the EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint 3 integrated in the aluminum rear end, 24 volt system with 1?15 pin and 2x7 pin. Socket, with side clearance lights in LED design, 2 reflective panels on the rear, 2 white position lights at the front and 2 at the rear. red, 2 separate LED reversing lights integrated in the U-protection
Structure/trough "structure fully welded inside"
reinforced side walls, front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn
Aluminum trough, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide completely welded with lower and upper belt, plank profiles fully welded inside, floor laid as a sliding floor system on 140 mm aluminum cross beams, floor forklift load
approx. 9 ton/m2 cross beams mounted accordingly closely (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in straight design, special aluminum corner profiles in beveled design, smooth rear wall in straight design with 2 aluminum wing doors 50/30 mm thick with 2 pivot rods Locks in the welded aluminum rear frame attached to Teflon bearings and stainless steel bearings, doors secured in the open position with a chain on each side, hard wear plates on the side walls approx. 2,000x1,500x4mm fully welded, running residual emptying wall with Kevlar tarpaulin approx. 1,800 mm long plus side with Kevl. -Plane sealing, service door in front wall with ladder turning inwards
Hydraulic system "Cargo - Floor" sliding floor system
Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE?HD sliders plus anti-lifting slide bearings, type CF 10 mm floor version, hydraulics with approx. 200 mm working stroke, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electric. Rear left control with radio control integrated in a lockable waterproof box, without hydraulic hoses
Accessories
6 PV
Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.
Version with continuous chassis reinforced, new body manufactured in a self-supporting design with corresponding reinforcements in the lower flange for particularly high stability and
strength, cross member 140 mm high reinforced version (for high ground loads) additional reinforcement as gusset plate in the front lower flange/vehicle frame area, chassis made of galvanized steel up to the support structure, (trailer construction max. 39,000 kg)
Axles and suspension "Disc brake 22.5"
Jost (DCA) axle units version, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard Infocenter, electronic brake wear indicator BVA-readable in the tractor unit (display), 1st axle with traction aid (new EC regulation, without tractor unit equipment), (on request against MP 1st + 3rd axle liftable)
Tires and wheels
6 wheels with tires of size 385/65 R 22 .5 according to manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75?22.5 ET 120
Seatposts
mechanical support winches with two speeds, 2x 20 ton support load with swivel foot,
Braking system
according to E.G. standard?EBS E-system Wabco with RSS system (roll stability support) and premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system,
Hjdpjyh S Aijfx Anvofp
electrical system
according to the guidelines of the EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint 3 integrated in the aluminum rear end, 24 volt system with 1?15 pin and 2x7 pin. Socket, with side clearance lights in LED design, 2 reflective panels on the rear, 2 white position lights at the front and 2 at the rear. red, 2 separate LED reversing lights integrated in the U-protection
Structure/trough "structure fully welded inside"
reinforced side walls, front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn
Aluminum trough, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide completely welded with lower and upper belt, plank profiles fully welded inside, floor laid as a sliding floor system on 140 mm aluminum cross beams, floor forklift load
approx. 9 ton/m2 cross beams mounted accordingly closely (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in straight design, special aluminum corner profiles in beveled design, smooth rear wall in straight design with 2 aluminum wing doors 50/30 mm thick with 2 pivot rods Locks in the welded aluminum rear frame attached to Teflon bearings and stainless steel bearings, doors secured in the open position with a chain on each side, hard wear plates on the side walls approx. 2,000x1,500x4mm fully welded, running residual emptying wall with Kevlar tarpaulin approx. 1,800 mm long plus side with Kevl. -Plane sealing, service door in front wall with ladder turning inwards
Hydraulic system "Cargo - Floor" sliding floor system
Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE?HD sliders plus anti-lifting slide bearings, type CF 10 mm floor version, hydraulics with approx. 200 mm working stroke, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electric. Rear left control with radio control integrated in a lockable waterproof box, without hydraulic hoses
Accessories
6 PV
Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.
Toimittaja
Huomautus: Rekisteröidy ilmaiseksi tai kirjaudu sisään, saadaksesi kaikki tiedot.
Rekisteröitynyt vuodesta: 2002
17 Verkkoilmoitukset
Lähetä kysely
Puhelin & Faksi
+49 2182 ... ilmoitukset
Nämä ilmoitukset voivat myös kiinnostaa sinua.
Onnistunut
Viestisi on lähetetty.
Pieni ilmoitus
Bottrop
1 616 km
Vakio vetoauto
SCANIAR 580 V8 SZM TOPLINE mit Hydrl. Pumpe 6x4
SCANIAR 580 V8 SZM TOPLINE mit Hydrl. Pumpe 6x4
Onnistunut
Viestisi on lähetetty.
Pieni ilmoitus
Jestetten
1 920 km
2019 MAN TGX 18.500 4x2 BLS -malli
MANTGX 18.500 4x2 Kipphydraulik
MANTGX 18.500 4x2 Kipphydraulik
Onnistunut
Viestisi on lähetetty.
Pieni ilmoitus
Weilerswist
1 692 km
Liikkuva lattia
Knapen
Knapen
Onnistunut
Viestisi on lähetetty.
Pieni ilmoitus
Ennigerloh
1 548 km
Räätälöidyllä korilla varustettu kuorma-auto
Mercedes-BenzActros 2553L Schubboden Komplett möglich | Hydrodrive 4x4x2
Mercedes-BenzActros 2553L Schubboden Komplett möglich | Hydrodrive 4x4x2
Onnistunut
Viestisi on lähetetty.
Pieni ilmoitus
Jestetten
1 920 km
2016 MAN TGS 35.440 8x4H*6 Spitzer GHH
MANTGS 35.440 8X4H-6 Spitzer GHH
MANTGS 35.440 8X4H-6 Spitzer GHH
Onnistunut
Viestisi on lähetetty.
Pieni ilmoitus
Lübbecke
1 478 km
Wielton 55 Kubik Alumulde
Wielton55 Kubik Alumulde
Wielton55 Kubik Alumulde
Onnistunut
Viestisi on lähetetty.
Pieni ilmoitus
Crailsheim
1 724 km
Vakio vetoauto
Mercedes-BenzActros 1853 LS 4x2 ***Top Ausstattung,***
Mercedes-BenzActros 1853 LS 4x2 ***Top Ausstattung,***
Onnistunut
Viestisi on lähetetty.
Pieni ilmoitus
Datteln
1 592 km
Korotettu pakettiauto
MERCEDES-BENZSprinter 314/316 CDI Maxi*AHK=3.500Kg*Garantie*
MERCEDES-BENZSprinter 314/316 CDI Maxi*AHK=3.500Kg*Garantie*
Onnistunut
Viestisi on lähetetty.
Pieni ilmoitus
Ennigerloh
1 548 km
Ikäyvä lattiasemitraileri
KnapenKT01 Voll fahrbereit leichter Brandschaden, Boden ok
KnapenKT01 Voll fahrbereit leichter Brandschaden, Boden ok
Onnistunut
Viestisi on lähetetty.
Pieni ilmoitus
Ennigerloh
1 548 km
Puoliperävaunu
KrakerCF-Z Schubboden Liftachse SAF Achsen
KrakerCF-Z Schubboden Liftachse SAF Achsen
Ilmoituksesi on poistettu onnistuneesti
Tapahtui virhe

















































































































































































