Matala lavetti perävaunu

HÜFFERMANN HPA 2072 Tieflader Abroller Rampen FullOptionNEU

WhatsApp
HÜFFERMANN HAP 20.72 MultiCarrier Full Option, arc-galvanized!!!

Features:
Permissible total weight: 18 t
Technical total weight: 20 t
Unladen weight: approx. 5,096 t (+/- DIN tolerance)
Dimensions
Frame length: approx. 7,200 mm, container internal length 6,000 – 7,000 mm + wheel vehicles
Maximum overall width: 2,550 mm
Duodpfx Aeyh Sl Dohxsn
Container resting height (in driving position): approx. 950 mm
Type HPA 2072, twin tires
Welded steel frame construction made from high-strength steel S700
Chassis for rear loading
Load securing with pneumatic low-tension lock with 4 claws,
Clamping force 2.5 t per claw, operation on the trailer, left side in direction of travel
1 removable roller stop as variable container stop
Integrated lashing rail on the outer frame for screw-in lashing rings
6 pairs of lashing holes in the front area of the outer frame
Rear bevel cut with ramp stowage compartment incl. steel plate cover
Low-maintenance, sealed ball-bearing slewing ring
Hanging rail for aluminum loading ramps (WITHOUT RAMPS)
2 pairs of 5 t lashing rings welded on at the front of the platform, embedded in the floor at the rear!
8 pairs of bolted 3 t lashing shackles evenly distributed on the outer frame
Towing Equipment
Telescopic drawbar, adjustable 6 x 100 mm, with 40 mm DIN eye, straight towing eye, D-value 125 kN, for twin-tyre chassis
Drawbar retaining spring with tensioner
Truck coupling height from 635 mm to 835 mm
Drawbar length: 2,000–2,600 mm
BPW EcoPlus low-loader axles with drum brakes, S-cam brakes 300/200 mm, load capacity 10 t/axle, 17.5" twin tires, automatic slack adjusters
8 tires 235/75 R 17.5, 141J
8 steel rims 6.75 x 17.5, with offset, silver
Black plastic wheel nut covers
Brake system according to ECE-R13
Two-line compressed air brake system
Brake system manufacturer Wabco
EBS system 4S3M, sensors on 1st & 2nd axle
Electronic brake and stability system EBS-E and RSS or TEBS G2 and RSP
Spring-actuated parking brake on 2nd axle
Aluminum air tank
Brake/air supply lines with Duomatic quick coupling
EBS/ABS connection cable
Bracket for EBS and electric plug at the drawbar
Air suspension with lift and lower function, separately operated front and rear via 2 rotary lever valves
Automatic setting to programmed ride height above 15 km/h
Schwarzmüller Intelligent Telematics
Weight detection/axle load display via EBS CAN bus signal, display in truck cabin
(Truck must be suitably equipped, not for calibrated weighing)
Tire pressure monitoring according to ECE-Regulation 141, with pressure sensors in wheels
Acoustic reverse warning system/signal, activated via reverse gear
24-volt lighting system according to ECE-R48
Fully LED multi-chamber tail lights "Aspöck EcoLED III"
LED position lights at front
LED outline marker lights at rear
LED side marker lights, operated via indicator signal
LED license plate lights
1 x 15-pin connection cable
2 LED work lights, mounted left and right under the outer frame
2 LED reversing lights, mounted at the rear left and right
7-pin socket at the rear
Paintwork
Machine blasted, arc-galvanized, epoxy primer, coated with 2K topcoat using electrostatic process
Material doublings and transitions preserved with cavity wax
Chassis = RAL 9005 deep black
Load securing elements = RAL 1003 signal yellow
Drawbar/tow bar in driving pos...

Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.