Säiliöpuoliperävaunu

D-TEC Gülletanker SV 2006 BASIC Lenkachse

D-TEC Slurry Tanker SV 2006 BASIC

Specification:
* Tank volume: 30m³, Ø2200 mm, wall thickness 3 mm, temperature range 0–60°C
* Extended swivel arm
* Flush line 4" with 2 gravity discharge points of 2.5" each, one at the front and one in the middle of the tank
* Flush line on the left side via tension cables over the hose trays
* Automatic pump shut-off. Axle also equipped with anti-spray mudguard
* Holder with 2 wheel chocks
* Left and right (narrow and tall) hose racks, each 5m, made of galvanized steel (250 mm wide, 190 mm high)

Pump:
* Vogelsang pump, 6,000 L/min

Axles:
* 9-ton Valx axles, Ø430 mm disc brakes, ET120
* 1st axle as lift axle
* 3rd axle as steering/lazy axle

Brakes:
* Wabco EBS braking system
* TPMS – Wabco Tyre Pressure Monitoring System (compliant with R141)
* No electronic air suspension

Additional Options:
* Third axle as self-steering axle

Lift Axle:
* Automatic lift function on the first axle, load-dependent activation, or by pressing the brake 3 times
* Starting assistance: load transfer to the 2nd and 3rd axles up to 130% below 30 km/h

Tyre Size:
* 385/65 R22.5

Tyres:
* Apollo

Lighting:
* 24-volt lighting system

Lighting options:
* Flashing side marker lights
* Working lights left and right at the first axle
* 2x LED working lights at the rear (1x left, 1x right, mounted on the hose racks)

Paintwork:
* Tank painted in RAL 7030 STONE GREY
* Chassis painted in RAL 7016 ANTHRACITE GREY

Miscellaneous:
Dsdpfx Asyhi Husifocg
* Gravity discharge connection at the rear of the pump; connection with manual valve (6" ball valve) for tank emptying; venting tank made of stainless steel (V2A)
* Docking funnel (8") on top at the rear. Pipe leads down to the bottom of the tank with a manual slide valve.

Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.