Siilo-puoliperävaunu

FELDBINDER OMEPS CR 47

O.ME.P.S Tipping Silo Semi-Trailer----Type: CR 47

Chassis:
Two fully automatically welded I-beam longitudinal members with welded cross members, chassis width 1,400mm, 2" king pin, tilting cylinder: Hyva

Axles and Suspension: Disc brakes 22.5” SAF axle assemblies 3x 9t with air suspension, axle spacing 2 x 1310 mm, lift and lower valve, loading pressure gauge on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring, 1st axle liftable without tractor unit adaptation, 3rd axle liftable with Wabco Optiturn

Fsdex Nuftspfx Aifopg
Rims and Tires:
6 wheels with tires size 385/65 R22.5, manufacturer’s choice on Alcoa Dura Bright aluminum rims in 11.75x22.5 ET 120

Brake System:
EBS 4S/2M WABCO pneumatic brake system with RSS, according to standard 98/12/CE - ECE R13/09, brake wear indicator connected

Landing Gear:
Mechanical landing legs with two speeds, 2x 20t static load with swiveling foot, rear without support

Electrical System: All lights in LED design, 24-volt electrical installation consisting of: one 15-pin socket mounted in front of the kingpin on the chassis beam, yellow side marker lights in required quantity, rear position lights, front clearance lights, rear license plate lights, lights according to standard 97/28/CE-2007/35/CE, 2 multi-chamber rear lights installed at the level of the pivot bearing in aluminum consoles according to standard 97/28/CE-2007/35/CE, 1 LED work light on the vessel, yellow warning light at the rear mounted at the height of the hose pipes, 2x reverse lights in the underrun protection, 2x reverse lights at the height of the supports (each switchable at the power console)

Tank Specification:
A horizontal tank made from aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). Single-chamber tank, capacity 47,000 liters, 24-month tank warranty from delivery. Operating parameters: Pressure vessel according to Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 bar - operating pressure 2.0 bar, operating temperature -40° to +80°

Filling Options:
4 manholes DN 450 with swiveling and folding covers. Each cover is sealed under pressure with 4 wing nuts, rubber support for domed covers at the top for storage, rain strip closed at front, open at rear

Material Discharge:
1 material discharge cone DN 800 made of INOX, foldable with INOX disc for material loosening, discharge cone swivels laterally, shut-off valve DN 150 with white gasket, connection: STORZ-A

Air Piping:
A 2.5” stainless steel air manifold pipe mounted on the right-hand operator side, a stainless steel air distribution pipe 4” mounted at the rear of the tank, air valves (shut-off flaps) in INOX, top air hose and air connection hoses feature 2” STORZ couplings, Micron filter, vacuum valve at the top of the tank, 1x vibrator 1m before the pivot bearing

Access Ladder and Walkway:
1 aluminum ladder mounted at the rear left of the vehicle, 1 aluminum safety scissor guardrail with a separate foldable ladder section deployable from below with parking brake when open, 1 aluminum safety walkway along the upper left side of the tank, anti-slip coating on the tank

Conveying Hose Storage:
4 hose tube containers 5 m long DN 200 made of aluminum with 4 hoses DN 100 and STORZ couplings, hose container with compressor hose D.76

Accessories: The side underrun protection is made of anodized aluminum design

Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.