Kippipuoliperävaunu

CARNEHL CHKS/HH 26m3 5,98tHARDOX ALCOA ppeTOP

WhatsApp
CARNEHL 26m³ HARDOX 2-axle tipping semi-trailer First registration 02.06.2021
GERMAN TRAILER, 1st owner

Features:
Weight: Gross weight 32,000 kg
Unladen weight approx. 5,980 kg
Fifth wheel load approx. 14,000 kg
Axle loads 2 x 9,000 kg

Dimensions:
Internal length approx. 7,600 mm
Internal width approx. 2,340 mm
Side wall height approx. 1,460 mm
Loading volume approx. 26 m³
Lhedpox Ntr Sjfx Abwsr
Colour: silver-grey

Chassis: SHK-2-ST-74
Proven welded construction using high-quality fine-grain steels for 7,350/7,400 mm body length,
sandblasted and primed

Chassis in reinforced design for half-shell tipping body
Continuous 8 mm fifth wheel plate
2" king pin
Chassis top chords adapted to the body shape, welded at an angle
Body rubber mountings on both sides on top chords
Tow eye
Aluminium access ladder (8 rungs), 2450 mm long, mounted with brackets on chassis
Collapsible underrun protection, mounted according to EC directives
Support preparation (brackets only)

2x SAF axles - 9 t integral axle aggregate (OFF-ROAD, 430 mm disc, ET 120)
Wheelbase 1,310 mm, track width 2,040 mm, air suspension, 1x ABS
ALCOA Dura Bright (polished & coated) 11.75R22.5 ET120
Tyres 385/65 R22.5 approx. 90-95% (see photos)

Brake system: WABCO EBS-E 2S/2M + RSP with integrated air suspension system
DUOMATIC connection
SAF TyrePilot automatic tyre inflation system
Parking brake via spring accumulator
Automatic lowering during tipping with cut-off function
Aluminium air tank
Lifting and lowering device for air suspension with Smart Board control panel
Load pressure gauge on front wall
Electrical system to ECE-R 48, 24 V system
1x 15-pin plug
6 round LED three-chamber rear lights
LED outline marker lights: front white, rear red/white
LED side marker lights yellow with integrated reflectors
LED number plate illumination for single-line licence plate
Rear fog light
3x reversing lights for trailer, Workpoint LED 1500
Aluminium tread plate lamp protection
Flashing function for side marker lights

Front tipper press manufacturer: HYVA ALPHA, ND/HD working pressure up to 250 bar
Working volume 86 L, minimum required tank capacity 116 L
Complete with pipes and NW-25 connectors
1" coupling plug
Tipping angle 50°–52°
Grease points at the front extended outward

Body: SHG-4.3-146-740
Rear tipper body Xtra
24 m³, 7,400 mm x 1,460 mm, made from folded half-shells
Continuous longitudinal weld
Floor section made from 5 mm, side walls from 5 mm HARDOX 450 HB
Additional 4 mm reinforcement in the discharge area under the body floor, tapering forward over the release lever
Folded upper rail on both sides in 3 mm HARDOX 450 HB
Straight, embossed front wall 3 mm fine-grain steel S700
Hydraulically operated rear wall SHG-4-146-B1.460 mm, opposite side
Rear wall plate made from 4 mm embossed fine-grain steel, swinging,
slightly inclined, flush with the upper edge of the body
Automatic 2-hook central locking
Locking hooks at the top edge, both sides, bevelled at 45 degrees,
rubber seal for rear wall, opposite side
Additional side lock for tailgate
Double-jointed hinge including wedge safety device for opposite rear wall
Aluminium platform mounted on the chassis
with broom and shovel holder, central access
Plastic half-shell mudguards Domar DK-4175 with original holders
Mud flaps on rear axle
2 steps inside at the front wall
2 wheel chocks with brackets
Shortened mudguards on last axle with bolted mud flaps
Roll tarp with winding tube, side ratchet tensioners and rear rubber tensioners

Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.