Kolmisuuntainen kippiperävaunuMÜLLER-MITTELTAL
18 to, Luft, Seitliche ALU Wände, Rollplane
Kolmisuuntainen kippiperävaunu
MÜLLER-MITTELTAL
18 to, Luft, Seitliche ALU Wände, Rollplane
Kiinteä hinta alv 0% (veroton)
34 500 €
(41 055 € bruttomassa)
Valmistusvuosi
2026
Kunto
Uusi
Sijainti
Egestorf 

Perustiedot
- Nimitys:
- Kolmisuuntainen kippiperävaunu
- Valmistaja:
- MÜLLER-MITTELTAL
- Valmistusvuosi:
- 2026
- Kunto:
- uusi
Hinta ja sijainti
Kiinteä hinta alv 0% (veroton)
34 500 €
(41 055 € bruttomassa)
- Myyjän sijainti:
- Eichenstich 12, 21272 Egestorf, Saksa

Soita
Tekniset tiedot
Mitat ja paino
Kokonaispaino:
18 000 kg
Maksimi kuormauspaino:
13 610 kg
Kuormatilan pituus:
4 995 mm
Lastitilan leveys:
2 380 mm
Kuormatilan korkeus:
900 mm
Akselit ja pyörät
Akselikokoonpano:
2 akselia
Tarjouksen tiedot
- Ilmoituksen tunnus:
- A207-87-252
- Viitenumero:
- 6317
- Päivitys:
- viimeksi 05.11.2026
Kuvaus
* KA-TA-R 18
----Brakes:
* EBS-E (electronic braking system with RSS)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axle:
* 2 x 9 ton Gigant axles
----Suspension:
* Air suspension with leveling during tipping
----Electrical System / Lighting:
* Tire pressure monitoring system with display option on the truck display via EBS signal - without truck-side installation -
* 15-pin power socket
* LED lighting with galvanized protective roof
* 2 LED reversing lights
----Fifth Wheel Coupling / Drawbar:
* Drawbar with 50 mm fifth wheel coupling (adjustable by +77 mm and -33 mm via offset plate)
----General Components:
* Front support jack
* Foldable, galvanized steel under-run protection for paver loading
* Closed plastic individual fenders
* Front panel platform made of grating with a step on the drawbar and handrails on the front panel
----Chassis:
* Chassis made of fine-grain steel
----Tipping Body:
* Steel 3-sided tipping body with aluminum side walls, asymmetrical - continuous without a center beam - pivoting via manual central locking, and foldable on the left with a side wall spring lift
* Rear wall - made of HBW 400 steel - pivoting via automatic 2-claw locking system
* 5 mm steel floor made of HBW 450 steel
----Load Securing:
* 4 x 3 ton lashing points on each side - recessed and foldable - embedded in the steel floor
----Covering Tarpaulin:
* Covering tarpaulin - agate gray, similar to RAL 7038 -
* Tarpaulin tensioning by means of ratchet straps on the sides and elastic straps at the front and rear
----Painting:
* Chassis, under-run protection, front panel and drawbar hot-dip galvanized
* Axles, air tank, support jack, fifth wheel coupling painted in a black tone
* Painting of the side walls in a RAL color of your choice (no special or metallic paints), can be changed up to approx. 6 weeks before completion
----Information:
* Reinforced and certified body according to EN 12642 XL incl. load securing certificate up to 19 tons.
* New vehicle without initial registration with manufacturer's warranty
* Errors and prior sale subject to change
Hjdpsx Ipbyofx Anvsnw
----Delivery Time:
* Available for immediate delivery from Egestorf
Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.
----Brakes:
* EBS-E (electronic braking system with RSS)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axle:
* 2 x 9 ton Gigant axles
----Suspension:
* Air suspension with leveling during tipping
----Electrical System / Lighting:
* Tire pressure monitoring system with display option on the truck display via EBS signal - without truck-side installation -
* 15-pin power socket
* LED lighting with galvanized protective roof
* 2 LED reversing lights
----Fifth Wheel Coupling / Drawbar:
* Drawbar with 50 mm fifth wheel coupling (adjustable by +77 mm and -33 mm via offset plate)
----General Components:
* Front support jack
* Foldable, galvanized steel under-run protection for paver loading
* Closed plastic individual fenders
* Front panel platform made of grating with a step on the drawbar and handrails on the front panel
----Chassis:
* Chassis made of fine-grain steel
----Tipping Body:
* Steel 3-sided tipping body with aluminum side walls, asymmetrical - continuous without a center beam - pivoting via manual central locking, and foldable on the left with a side wall spring lift
* Rear wall - made of HBW 400 steel - pivoting via automatic 2-claw locking system
* 5 mm steel floor made of HBW 450 steel
----Load Securing:
* 4 x 3 ton lashing points on each side - recessed and foldable - embedded in the steel floor
----Covering Tarpaulin:
* Covering tarpaulin - agate gray, similar to RAL 7038 -
* Tarpaulin tensioning by means of ratchet straps on the sides and elastic straps at the front and rear
----Painting:
* Chassis, under-run protection, front panel and drawbar hot-dip galvanized
* Axles, air tank, support jack, fifth wheel coupling painted in a black tone
* Painting of the side walls in a RAL color of your choice (no special or metallic paints), can be changed up to approx. 6 weeks before completion
----Information:
* Reinforced and certified body according to EN 12642 XL incl. load securing certificate up to 19 tons.
* New vehicle without initial registration with manufacturer's warranty
* Errors and prior sale subject to change
Hjdpsx Ipbyofx Anvsnw
----Delivery Time:
* Available for immediate delivery from Egestorf
Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.
Toimittaja
Huomautus: Rekisteröidy ilmaiseksi tai kirjaudu sisään, saadaksesi kaikki tiedot.
Rekisteröitynyt vuodesta: 2001
158 Verkkoilmoitukset
Lähetä kysely
Puhelin & Faksi
+49 40 33... ilmoitukset
Nämä ilmoitukset voivat myös kiinnostaa sinua.
Onnistunut
Viestisi on lähetetty.
Pieni ilmoitus
Bobenheim - Roxheim
1 742 km
Kolmisuuntainen kippiperävaunu
SCHWARZMÜLLER2Z 2 Achs Tandem Kippanhänger -MIETE-
SCHWARZMÜLLER2Z 2 Achs Tandem Kippanhänger -MIETE-
Ilmoituksesi on poistettu onnistuneesti
Tapahtui virhe











































































