Työalustallinen perävaunu

MÜLLER-MITTELTAL T3 Profi 30,0 Neu, Baggerstiel, Federrampe

* T3 Profile 30.0:
* EBS brake system
* TPMS (Tire Pressure Monitoring System)
* Emergency release device for spring brake cylinders
* Drum brakes
* 3 x 11 t BPW Eco axles
* Parabolic springs
* Mechanical rear axle compensation
* Lateral underrun protection
* Swivel supports at the rear of the chassis frame
* Mechanically adjustable warning sign boards at front and rear
Bdodpfsx Ipa Njx Aifjb
* Closed plastic mudguards at the front axle and straight galvanized steel splash aprons at the rear axle, each with mud flaps
* Side and rear reflective contour marking tape
* Hinged cover (hot-dip galvanized) for toolbox in the turntable platform
* Multi-voltage system
* LED tail lights
* Removable beacon at rear
* Drawbar with 40 mm towing eye and height adjustment via tension spring & turnbuckle
* 15-pin power connector
* 4 stake pockets on each side (stakes not included) with integrated lashing points
* Load securing package consisting of: 2 lashing eyes (6.4 t) at front left & right on the main frame of the turntable platform, 5 pairs of UVV folding & lowering lashing rings, loadable in all directions and recessed into the outer frame – 13.4 t in the corners, otherwise 10 t
* 6 pairs of mechanical folding outriggers for a total width of 3 m (not at the rear taper)
* Widening boards stored in the center of the loading area
* Excavator arm rest over rear axle up to end cross member approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the side of the excavator arm rest)
* Mechanical one-piece loading ramps with spring mechanism (approx. 3,000 x 720 mm)
* Mechanically controlled lateral ramp adjustment
* Loading area above turntable: approx. 1,960 x 2,520 mm
* Unladen loading height approx. 1,070 mm
* Rear loading area: approx. 6,500 x 2,520 mm
* Unladen loading height approx. 910 mm (including 860 mm approach angle)
* Chassis, turntable, drawbar, and loading ramps hot-dip galvanized
* Axles, springs, air tanks, etc. painted in black
* 235/75 R 17.5 twin tires
* 5,900 kg unladen weight
* --Technically possible gross weight of 30,000 kg--
* Vehicle is hot-dip galvanized
* New vehicle with manufacturer’s warranty
* Errors and prior sale excepted
* Immediately available ex Egestorf

Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.