Roll-off-konttiDecker Containerbau
Späne, Container, Absaug, ca.34m³
Roll-off-kontti
Decker Containerbau
Späne, Container, Absaug, ca.34m³
Valmistusvuosi
2025
Kunto
Uusi
Sijainti
Sankt Wolfgang 

Näytä kuvat
Näytä kartta
Perustiedot
Hinta ja sijainti
- Sijainti:
- Am Schmiedanger 11, 84427 Sankt Wolfgang, Deutschland

Soita
Tarjouksen tiedot
- Listaustunnus:
- A206-47-420
- Päivitetty viimeksi:
- 01.12.2025
Kuvaus
Chip Container approx. 34m³
Immediately available from stock 84427 St. Wolfgang
Standard Equipment for Chip Container:
-Internal dimensions: L 6000 mm x W 2350 mm x H 2400 mm
-Subframe: INP 180
-Hook height: 1570 mm
-Pickup bar: 60 mm
-C-locking system
-Steel external rollers, greaseable and replaceable
-UVV tested, compliant with DIN 30722-1 (15,000 kg)
-Bolt-on ladder on front face, RAL color shade 3002 Carmine Red
Floor:
-Steel sheet 4 mm S 235
-Frame spacing: 750 mm
-Frame profile: 80 x 50 x 4 mm
Wall:
-Steel sheet 3 mm S 235
-Frame spacing: 750 mm
-Frame profile: 80 x 50 x 4 mm
-Continuous rectangular tube frame 120 x 60 x 4 mm
-No bulge frames
Floor to wall connection:
-Floor to wall 45° angle
Iedpfx Acox Adt Rjuea
Further features:
- On the front wall upper section: 2 pipe connectors left and right, spaced 400 mm from the outside, with inner diameter of 220 mm and 8-hole round flange, pipe protrusion forward between 100 mm
- On the front wall center: 2 pipe nozzles with 60 mm outer diameter (2") and male threads at heights of 2000 mm and 2150 mm, pipe protrusion forward between 80 mm and 100 mm
- Sprinkler pipe located centrally under the roof
Rear section:
-Pendulum flap with continuous rubber seal
-Tightened by eye bolts for sealing, therefore no swing doors
-Road latching via over-center latches
Roof/Tarpaulin:
-Fixed roof designed as a gable roof with approx. 10 cm central pitch
-2 explosion flaps in the roof positioned front and rear on the right side of the container
Corrosion protection:
-Primed inside and outside
Paintwork:
-Synthetic resin paint exterior, RAL 7016 Anthracite
Suitable for trailers from Pronar, Krampe, Fliegl
Available from stock 84427 St. Wolfgang
-Subject to prior sale-
Payment terms: 100% before loading.
Goods remain our property until fully paid for.
Our general terms and conditions apply.
This offer is non-binding, without guarantee or warranty.
We are happy to provide a non-binding quotation upon request.
You can find our full product range at decker-containerbau.
Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.
Immediately available from stock 84427 St. Wolfgang
Standard Equipment for Chip Container:
-Internal dimensions: L 6000 mm x W 2350 mm x H 2400 mm
-Subframe: INP 180
-Hook height: 1570 mm
-Pickup bar: 60 mm
-C-locking system
-Steel external rollers, greaseable and replaceable
-UVV tested, compliant with DIN 30722-1 (15,000 kg)
-Bolt-on ladder on front face, RAL color shade 3002 Carmine Red
Floor:
-Steel sheet 4 mm S 235
-Frame spacing: 750 mm
-Frame profile: 80 x 50 x 4 mm
Wall:
-Steel sheet 3 mm S 235
-Frame spacing: 750 mm
-Frame profile: 80 x 50 x 4 mm
-Continuous rectangular tube frame 120 x 60 x 4 mm
-No bulge frames
Floor to wall connection:
-Floor to wall 45° angle
Iedpfx Acox Adt Rjuea
Further features:
- On the front wall upper section: 2 pipe connectors left and right, spaced 400 mm from the outside, with inner diameter of 220 mm and 8-hole round flange, pipe protrusion forward between 100 mm
- On the front wall center: 2 pipe nozzles with 60 mm outer diameter (2") and male threads at heights of 2000 mm and 2150 mm, pipe protrusion forward between 80 mm and 100 mm
- Sprinkler pipe located centrally under the roof
Rear section:
-Pendulum flap with continuous rubber seal
-Tightened by eye bolts for sealing, therefore no swing doors
-Road latching via over-center latches
Roof/Tarpaulin:
-Fixed roof designed as a gable roof with approx. 10 cm central pitch
-2 explosion flaps in the roof positioned front and rear on the right side of the container
Corrosion protection:
-Primed inside and outside
Paintwork:
-Synthetic resin paint exterior, RAL 7016 Anthracite
Suitable for trailers from Pronar, Krampe, Fliegl
Available from stock 84427 St. Wolfgang
-Subject to prior sale-
Payment terms: 100% before loading.
Goods remain our property until fully paid for.
Our general terms and conditions apply.
This offer is non-binding, without guarantee or warranty.
We are happy to provide a non-binding quotation upon request.
You can find our full product range at decker-containerbau.
Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.
Toimittaja
Huomautus: Rekisteröidy ilmaiseksi tai kirjaudu sisään, saadaksesi kaikki tiedot.
Rekisteröity alkaen:: 2023
Lähetä pyyntö
Puhelin & Faksi
+49 8081 ... ilmoitukset
Ilmoituksesi on poistettu onnistuneesti
Tapahtui virhe










