Avoin puoliperävaunu pressulla

KÖGEL S24-1*Volumen-Pritschensattelanhänger*10x vorhan

VIN: WK0S0002400300637

Permissible fifth wheel load: 12,000 kg
Permissible axle assembly load: 24,000 kg (8,000 kg per axle)
Technically possible axle assembly load: approx. 27,000 kg (9,000 kg per axle)
Permissible gross vehicle weight: 36,000 kg
Technically possible gross vehicle weight: approx. 39,000 kg
Theoretical payload: approx. 29,478 kg
Floor load capacity according to DIN EN 283 with test axle load 7,200 kg
(A) Wheelbase: approx. 6,390 mm
(A1) Axle spacing: approx. 1,310 mm
(A2) Axle spacing: approx. 1,310 mm
(D) Overall length: approx. 13,950 mm
(E) Overall width: approx. 2,550 mm
(F) Loading platform length, internal: approx. 13,620 mm
(G) Loading platform width, internal: approx. 2,480 mm
(G2) Rear through-loading width: approx. 2,480 mm
(H1) Loading height unladen in drive position, horizontal: approx. 1,030 mm
(H2) Loading height laden in drive position, horizontal: approx. 1,000 mm
Kdjdpoxxxr Hjfx Afmow
(H3) Achievable ramp height at the rear of the vehicle with fifth wheel height 910 mm, loaded, raised: approx. 1,190 mm
Ride height set to 265 mm.
(K) Side through-loading height, internal: front approx. 2,735 mm - approx. 2,860 mm [adjustable in 5x25 mm steps], rear approx. 2,810-2,860 mm [adjustable in 1x50 mm step]
(K1) Internal height under roof: front approx. 2,875 mm - approx. 3,000 mm [adjustable in 5x25 mm steps], rear approx. 2,950 mm - approx. 3,000 mm [adjustable in 1x50 mm step]
(X1) Overall height unladen in drive position, horizontal: = H1 + K + T +/- body height adjustment | = S + P + K + T +/- height adjustment
Body settings: The structural design of the "Mega" body enables height adjustment of 5x25 mm at the front and 1x50 mm at the rear. The relevant heights (overall height, side through-loading height, internal height) change according to the selected body setting.
(T) Body roof height, lateral: approx. 180 mm. Due to the roof beam design, the internal pallet-width height corresponds to the specified internal height under the roof.
(N) Front overhang (according to ISO 1726): approx. 1,685 mm
(N1) Front overhang radius (according to ISO 1726): approx. 2,040 mm
(O) Rear swing radius (according to ISO 1726): approx. 2,300 mm
(P) Structural height above the fifth wheel: approx. 90 mm
(S) Possible unladen fifth wheel height: approx. 940 - 1,070 mm, level at approx. 940 mm (observe overall height!)

Frame
Conventional ladder-type frame in lightweight steel with through-going cross members.
Cover plate between outer frame and longitudinal members to serve as splash protection for tractor unit rear wheels.
Coupling plate 8 mm thick, fitted with a 2" kingpin according to DIN 74080/ISO 337

Chassis
Axle lift mechanism on axle 1
Axle lift control fully automatic and load-dependent. Start assist: activation by 3x brake, 30% overload permitted up to a speed of 25 km/h.
Three-axle SAF INTRADISC assembly with 370 mm disc brakes, ET 120.
Air suspension with 260 mm lift

Chassis attachments
JOST landing legs, mechanical with compensating foot, 24 t lifting capacity. Single-sided operation, right side in direction of travel.
Side underrun protection according to ECE-R73
2 large, waterproof toolboxes made of plastic, internal dimensions approx. 923 x 422 x 460 mm. Mounted at rear, 1x left and 1x right.
Rear right access ladder, extendable.
Low, rigid rear underrun guard made of steel in accordance with ECE-R58
Minimum underrun guard profile height 120 mm, designed for increased test forces.

Brake/air suspension system
WABCO EBS system
Air su

Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.