Matala lavetti perävaunuHUMBAUR
5-Achs Tieflader / Lift- und Lenkachse/ 50 to
Matala lavetti perävaunu
HUMBAUR
5-Achs Tieflader / Lift- und Lenkachse/ 50 to
kiinteä hinta ei sisällä ALV
39 900 €
(47 481 € bruttomassa)
Valmistusvuosi
2018
Kunto
Käytetty
Sijainti
Euskirchen 

Näytä kuvat
Näytä kartta
Perustiedot
Hinta ja sijainti
kiinteä hinta ei sisällä ALV
39 900 €
(47 481 € bruttomassa)
- Myyjän sijainti:
- Dachsstraße 21, 53881 Euskirchen, Saksa

Soita
Tekniset tiedot
- Maksimi kuormauspaino:
- 39 348 kg
- Kokonaispaino:
- 50 000 kg
- Akselikokoonpano:
- 3 akselia
- Ensirekisteröinti:
- 07/2018
- Seuraava tarkastus (TÜV):
- 02/2026
- Kuormatilan pituus:
- 9 822 mm
- Lastitilan leveys:
- 2 540 mm
- Kuormatilan korkeus:
- 890 mm
- Kokonaisleveys:
- 2 550 mm
- Kokonaiskorkeus:
- 3 700 mm
- Varusteet:
- ABS
Tarjouksen tiedot
- Listaustunnus:
- A205-62-105
- Viitenumero:
- 13369
- Päivitetty viimeksi:
- 19.11.2025
Kuvaus
Phone & WhatsApp
Vehicle Data
Chassis number: WHD509525J0866708
* Year of manufacture / Delivery: 2018
* Permissible total weight: 24,000 kg (special permit up to 50,000 kg)
* Payload: approx. 14,500 kg (with special permit up to 40,500 kg)
* Technical total weight: approx. 55,000 kg
* Internal cargo area dimensions: approx. 9,822 × 2,540 mm
* Overall dimensions: approx. 11,790 × 2,540 × 3,760 mm
* Loading height: approx. 890 mm
* Low bed length: approx. 7,220 mm
* Ramp angle: approx. 10°
---- Chassis & Axles
5-axle low-loader with turntable
* SAF low-loader axles with enclosed S-cam brakes
* Axle configuration:
* 1st axle: lift axle
* 2nd axle: fixed
* 3rd axle: follow-steering axle
* Air suspension with raising & lowering
* Tyres: 235/75R17.5
---- Frame & Superstructure
Heavy-duty welded construction made of high-tensile fine-grain steel
* Continuous crossmembers for maximum stability
* Wheel recesses above the rear wheels
* Sloped front and rear corners
* Hot-dip galvanized chassis frame (immersion bath)
* Paintwork: special color Scania Chilli Red (1433004)
---- Cargo Area & Securing
50 mm softwood floor
* 5 pairs of recessed lashing rings (10 t) in the low-bed section
* 3 pairs of lashing rings (10 t) in the raised-bed section
* 4 pairs of lashing points (3 t) on the outer frame
* Stake pocket package on the outer frame
* Fold-out outriggers with spruce planks (straight part of the low-bed)
* Warning panels and beacon for special permit
---- Ramps & Hydraulics
Drive-on ramps 3,100 × 750 mm, hot-dip galvanized, laterally adjustable
* Hydraulic ramp lifter for one-piece ramps
* Hydraulic ramp shifting (sideways, only with basic hydraulics)
* Hydraulic support legs left & right (only with basic hydraulics)
* Basic hydraulics for truck connection (200 bar / up to 150 l/min, 2-circuit)
---- Braking System & Electrics
Braking system according to EC directives with EBS (4S/3M)
* Spring-loaded parking brake
* 24V electrics with shock-resistant multi-chamber lights in underrun protection
* 15-pin connection cable
* WABCO Smart Board
* 24V EBS braking system incl. connector
---- Accessories & Extras
Various storage boxes (front, rear, under loading area, with hinged lids)
* Special mount for adjustable drawbar height
* Cranked drawbar with 50 mm towing eye
* Chocks (standard + 2 additional chocks)
* Steel mudguards with anti-spray system
* Retroreflective line marking according to ECE R48
* Visible surface painting over galvanization (front, outer frame, rear)
Technical Condition:
* Fully functional
* Body and vehicle in top condition
Tyres:
Kjdpfxexxug Hj Afmodw
* 1st axle (235/75R17.5) approx. 20%
* 2nd axle (235/75R17.5) approx. 20%
* 3rd axle (235/75R17.5) approx. 20%
* 4th axle (235/75R17.5) approx. 10%
* 5th axle (235/75R17.5) approx. 30%
Other:
* German vehicle documents
* Vehicle ready for immediate use
* Video of the vehicle available
Contact: Jörn Jacobsen & WhatsApp)
The information provided in advertisements, on the Internet, in price tags and images are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typing or data transmission errors. Listed equipment may need to be checked separately. Subject to errors and prior sale.
We are a master automotive workshop and official partner of Hiab, Meiler, Terberg and HMF.
We assist with all export formalities.
Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.
Vehicle Data
Chassis number: WHD509525J0866708
* Year of manufacture / Delivery: 2018
* Permissible total weight: 24,000 kg (special permit up to 50,000 kg)
* Payload: approx. 14,500 kg (with special permit up to 40,500 kg)
* Technical total weight: approx. 55,000 kg
* Internal cargo area dimensions: approx. 9,822 × 2,540 mm
* Overall dimensions: approx. 11,790 × 2,540 × 3,760 mm
* Loading height: approx. 890 mm
* Low bed length: approx. 7,220 mm
* Ramp angle: approx. 10°
---- Chassis & Axles
5-axle low-loader with turntable
* SAF low-loader axles with enclosed S-cam brakes
* Axle configuration:
* 1st axle: lift axle
* 2nd axle: fixed
* 3rd axle: follow-steering axle
* Air suspension with raising & lowering
* Tyres: 235/75R17.5
---- Frame & Superstructure
Heavy-duty welded construction made of high-tensile fine-grain steel
* Continuous crossmembers for maximum stability
* Wheel recesses above the rear wheels
* Sloped front and rear corners
* Hot-dip galvanized chassis frame (immersion bath)
* Paintwork: special color Scania Chilli Red (1433004)
---- Cargo Area & Securing
50 mm softwood floor
* 5 pairs of recessed lashing rings (10 t) in the low-bed section
* 3 pairs of lashing rings (10 t) in the raised-bed section
* 4 pairs of lashing points (3 t) on the outer frame
* Stake pocket package on the outer frame
* Fold-out outriggers with spruce planks (straight part of the low-bed)
* Warning panels and beacon for special permit
---- Ramps & Hydraulics
Drive-on ramps 3,100 × 750 mm, hot-dip galvanized, laterally adjustable
* Hydraulic ramp lifter for one-piece ramps
* Hydraulic ramp shifting (sideways, only with basic hydraulics)
* Hydraulic support legs left & right (only with basic hydraulics)
* Basic hydraulics for truck connection (200 bar / up to 150 l/min, 2-circuit)
---- Braking System & Electrics
Braking system according to EC directives with EBS (4S/3M)
* Spring-loaded parking brake
* 24V electrics with shock-resistant multi-chamber lights in underrun protection
* 15-pin connection cable
* WABCO Smart Board
* 24V EBS braking system incl. connector
---- Accessories & Extras
Various storage boxes (front, rear, under loading area, with hinged lids)
* Special mount for adjustable drawbar height
* Cranked drawbar with 50 mm towing eye
* Chocks (standard + 2 additional chocks)
* Steel mudguards with anti-spray system
* Retroreflective line marking according to ECE R48
* Visible surface painting over galvanization (front, outer frame, rear)
Technical Condition:
* Fully functional
* Body and vehicle in top condition
Tyres:
Kjdpfxexxug Hj Afmodw
* 1st axle (235/75R17.5) approx. 20%
* 2nd axle (235/75R17.5) approx. 20%
* 3rd axle (235/75R17.5) approx. 20%
* 4th axle (235/75R17.5) approx. 10%
* 5th axle (235/75R17.5) approx. 30%
Other:
* German vehicle documents
* Vehicle ready for immediate use
* Video of the vehicle available
Contact: Jörn Jacobsen & WhatsApp)
The information provided in advertisements, on the Internet, in price tags and images are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typing or data transmission errors. Listed equipment may need to be checked separately. Subject to errors and prior sale.
We are a master automotive workshop and official partner of Hiab, Meiler, Terberg and HMF.
We assist with all export formalities.
Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.
Toimittaja
Huomautus: Rekisteröidy ilmaiseksi tai kirjaudu sisään, saadaksesi kaikki tiedot.
Lähetä pyyntö
Puhelin & Faksi
+49 2251 ... ilmoitukset
Ilmoituksesi on poistettu onnistuneesti
Tapahtui virhe






























