Matalakuormaaja-puoliperävaunu

Meusburger 3-Achs-Tele-Semi-Radmulden-hydr. Rampen

With every used semi-trailer, you receive a current and complete inspection and functionality report.

Chassis:
- Robust welded steel frame construction with front frame cranking and flat loading area featuring a rear chamfer approx. 500x100 mm
- Neck section 200 mm with chamfered front corners
- Tapered end of gooseneck approx. 500 x 100 mm (anti-slip ribs on the outer frame in the rear chamfer area)
- Two king pin positions with replaceable 2” king pin
- Outer frame fully closed, perforated for lashing
- Platform with extendable central frame, extendable by approx. 2,000 mm, lockable pneumatically in 500 mm increments
- Frame before and after extension step with 80x80 mm profile
- Reinforced frame version, supports point loads in retracted state at center of gravity
- With excavator trough (open, without cover), depth approx. 220 mm, width approx. 600 mm, starts after 2nd axle and extends to vehicle end
- 1 pair of wheel recesses between 1st and 2nd axle with steel covers (covers with Körapur coating), depth approx. 400 mm

Ramps:
- 2 units of special design 2-part loading ramps with mechanical extension
- Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting system (only in conjunction with electrohydraulic unit)
- Width approx. 800 mm
- Wood decking
- With anti-slip ribs on loading ramps
- Lockable in driving position with lashing straps
- Operated by control lever mounted at rear right side
- Laterally adjustable hydraulically

Flooring:
- 35 mm larch timber floor with aluminum omega profiles

Axles, Steering, and Tires:
- BPW air suspension axles, 10 t axle load each, air bag diameter 360 mm
- S-cam brakes 300/200 mm, asbestos-free brake pads
- Automatic slack adjusters
- Lifting and lowering device with total stroke approx. 200 mm
- 2nd ride height via ball valve +50 mm
- 1st axle is a lift axle (wired via EBS), fully automatic actuation, emergency actuation by push button on the trailer
- 3rd axle as friction-steered trailing axle with electric and mechanical lock
- 12 steel disc wheels, 10-hole, center offset
- 12 tires, 245/70 R 17.5 143/141J, tubeless
- Including tire pressure monitoring

Accessories:
- Removable side and rear boards on the gooseneck, approx. 400 mm high
- Spare wheel holder
- Lateral aluminum underrun protection
- Four wheel chocks with holders
- Elongated license plate holder integrated into the rear closing panel
- 1 ECE plate, plug-in at rear
- 11 pairs of ZK modules 10t side fitments:
• 2 on the gooseneck
• 2 on the loading area before the extension
• 7 after extension
- Extendable warning signs incl. 3 marker lights each, at the front next to the landing legs and at the rear before the end panel, continuously extendable up to 4,500 mm loading width
- 4 sockets in stake pockets on the loading area for positionable warning signs
- 6 pairs of side stake pockets for 100x50 mm stakes
- 2 rows of crosswise stake pockets for 100x50 mm stakes on the gooseneck, from outer frame to main frame (one before and one after the king pin positions)
- 3 rows of crosswise stake pockets for 100x50 mm stakes on the deck, from outer frame to main frame (one before extension, one after extension, and one behind 3rd axle)
Bodpfx Absxxl E Howjct
- 2 pairs of steel plates on the loading bed for container locks, suitable for carrying 1x 20ft container

Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.