Matala puoliperävaunu rakennuskoneiden kuljetukseen

Faymonville MAX Trailer 4-A-Mega-Tele-Semi-nachlaufg

You will receive a current and complete inspection and functional report with each used semi-trailer.

Gooseneck:
-Gooseneck with a 30 mm thick hardwood deck
-Gooseneck with a straight rear section
-3 pairs of lashing rings (LC 5,000 daN)

Extendable platform:
-Extendable platform
-5 pairs of lashing rings that fold outwards (LC 5,000 daN)
-3 pairs of lashing rings that fold outwards (LC 10,000 daN)
-1 pair of lashing rings located horizontally at the front of the platform (LC 10,000 daN)
-Cutouts in the outer frame of the platform for attaching tension straps (LC 2,000 daN)
-Hardwood deck approximately 48 mm thick, with a diamond plate deck over the axles

Axles and tires:
-BPW axles, two fixed axles, two steered axles
-Air suspension, with drum brakes, with lift/lower function
-The trailing axles with electro-magnetic reverse lock can be activated via reverse gear or manually
-Axle tool
-Tires 205/65 R17.5
-TPMS tire pressure monitoring system according to ECE R 141

Included accessories:
-One spare wheel with holder in front of the headboard
-2" kingpin
-One galvanized steel headboard approximately 400 mm high
-Yellow-red air couplings on the galvanized connection strip at the front
Iiedsxwnfmspfx Aldjd
-4 wheel chocks with holder on the headboard
-Galvanized folding supports under the ramp of the platform
-One holder for a rotating beacon on the rear of the semi-trailer
-Galvanized extendable widening elements approximately 230 mm on each side
-White reflector tape according to EU regulations on the sides, on the extension, and red on the rear
-On the gooseneck and on the rear panel, one holder each on the left and right for warning signs, including a socket
-One mud flap on the rear of the semi-trailer
-European reflector signs (red-yellow) on the rear of the semi-trailer
-On the gooseneck, plug-in aluminum side panels and rear panel approximately 2,440 x 400 mm
-The rear, galvanized plug-in supports are removable. Length of the structure approximately 2,560 mm
-7 pairs of WADER container pockets:
-1x 20 ft container on the platform
-1x 40 ft container on the platform
-1x 40 ft container over the gooseneck
-2x 20 ft container
-Support block with 1 pair of WADER container pockets (bearing load approximately 20,000 kg)
-7 pairs of support pockets for plug-in supports 100 x 50 mm in the outer frame of the platform
-Lift axle on the front axle with control via TEBS E depending on the current axle load and the current loading condition
-Sliding mounting rail for aluminum ramps at the rear of the vehicle
-A painted layer of sand on the diamond plates on the gooseneck and on the platform as an anti-slip measure
-Four warning signs that extend approximately 400 mm, approximately 423 x 423 mm, with a position light
-A holder for a rotating beacon on the warning signs
-Speed stickers 80 km/h on the rear and on both sides
-Load gauge for determining axle loads, including a load diagram

Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.