Matala lavettipuoliperävaunu

FAYMONVILLE Multimax Satteltieflader - hydr. gelenkt

You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website.

Excerpts from the equipment list. Complete specifications available upon request.

Gooseneck:
* Gooseneck in SNT design for optimized loading platform length, approx. 3,700 mm in length
* Rear of the gooseneck with bevel of approx. 1,000 mm x 10°
* Technical fifth wheel load: 30,000 kg
Suitable for tractor units: 4 x 2, 6 x 2 and 6 x 4

Loading platform:
* Telescopic loading platform, approx. 8,800 mm in length, with rear ramp approx. 500 mm x 10°

Axles and suspension:
* BPW axles and suspension
* 1st axle steered, equipped with electromagnetic reverse lock; all other axles hydro-mechanically forcibly steered
* Technical axle load: 12,000 kg each
* Air suspension with lifting and lowering valve

Tyres:
* 235/75 R 17.5 3PMSF twin tyres, load index 143/141J (144/144F)

Brake system:
* WABCO EBS-E braking system, compliant with EU regulations

Paintwork:
* Trailer colour: RAL 3002 Carmine Red

Accessories included:
* Removable steel front wall, approx. 400 mm high
Chodpfxsxuypre Aaxsd
* Round NATO socket on the front connection strip (Maeler & Kaege VG 96 917)
* 3 kW electro-hydraulic unit for controlling hydraulic operations, except for hydraulic winches; without installation of power connections on the tractor unit
* Stowage position on the gooseneck for warning signs when not in use
* 1 mounting adapter for spare wheel in front of the gooseneck front wall (without spare wheel)
* Outer carrier on the gooseneck with fixing holes for bolt-on lashing rings. First hole approx. 200 mm from the front, then at approx. every 400 mm
* 2 pairs of screw-in lashing rings included (LC 5,000 daN)
* 1 pair of horizontal lashing rings in the rear area of the gooseneck (LC 10,000 daN)
* On the gooseneck, 1 pair of removable ALU sidewalls, approx. 400 mm high, anodised
* On the gooseneck, 1 removable ALU rear wall, approx. 400 mm high, anodised
* Approx. 40 mm thick hardwood flooring over the gooseneck, checker plate over the kingpin
* 2" kingpin
* Mechanical landing gear with 2-speed gearbox and crank, JOST Modul B
* On the loading platform: continuous and axially interrupted approx. 50 mm thick hardwood flooring
* Platform locking with conically welded locking profiles approx. every 500 mm
* Slotted holes for hook-in and repositionable bridging elements: at front of loading platform
* 1 sliding intermediate table, approx. 300 mm wide, for the high cross-section telescopic tube with checker plate surface; front and rear with slotted holes for hook-in and repositionable bridging elements
* 1 pair of lashing rings on the front crossmember (LC 10,000 daN)
* 7 pairs of recessed lashing rings in the outer frame of the loading platform, foldable outwards (LC 10,000 daN)
* Extendable galvanised platform widenings by approx. 230 mm per side (without wooden planks)
* 1 pair of mechanical rear supports
* Rear steering from front and rear operable via cable remote control with buttons, with single-track axle alignment, without installation in tractor unit
* Cable (approx. 35 mm², approx. 3.5 m long) with connectors (NATO-NATO) between trailer and tractor unit for supplying the electro-hydraulic unit and/or electric winch
* 2 additional pairs of bolt-on lashing rings (LC 5,000 daN)
* 1 one-piece INOX tool box, approx. 2,480 x 340 x 390 mm (L x W x H), straight design, with 2 external side doors and 1 top lid, located behind the front wall

Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.