Avoin puoliperävaunu pressulla

KRONE SD Plane Mega Edscha Hubdach 2x Liftachse

Krone SD Curtain Mega Edscha Lifting Roof 2x Lift Axle (1st + 3rd Axle) Multilock Outer Frame

Perm. gross weight: 36,000 kg
Unladen weight: 6,196 kg
Payload: 29,804 kg
Coupling height unladen: approx. 985 mm
BPW Bergische axles
Lift axle 1st and 3rd axle
Air suspension
Disc brakes
Edscha sliding roof system
Hydraulic lifting roof with 500 mm total lift, can be raised separately at 4 corner posts
Sliding curtain with reinforcement strap
Sliding curtain on both sides (right and left)
Rear portal doors
Side underrun protection right, left, and rear
2x landing gears (manual supports)
Rear access ladder right
Toolbox left
Toolbox right
Forklift-compatible floor
Steel impact buffers
Multilock outer frame
ABS
Hsdpfjxtrttex Aaxew
EBS
ALB (automatic load-dependent brake force regulator)
DIN EN 12642 Code XL
Wheelbase: approx. 6,350 + 1,310 + 1,310 mm
Loading area LxWxH: 13,620 x 2,480 x 2,999 mm
External dimensions LxWxH: 13,950 x 2,550 x 4,000 mm
Clear loading height at rear portal: 2,795 mm
Clear loading width at rear: 2,480 mm i.l.
Tyres: 435/50R19.5 on ALCOA aluminium rims
Tread depth, left front: 6 mm
Tread depth, left centre: 10 mm
Tread depth, left rear: 10 mm
Tread depth, right front: 5 mm
Tread depth, right centre: 9 mm
Tread depth, right rear: 4 mm

Additional equipment/specifications:
Type: SD
Suitable for tractor unit (ISO 1726 restricted – tractor unit data required!)
King pin distance to centre of support approx. 2,720 mm
Coupling height unladen: approx. 985 mm
Double-T longitudinal and centre beams as well as outer frame welded with cross beams and outriggers
Multilock outer frame with universal load securing option every 100 mm
Front construction height: 80 mm (including floor and fifth wheel plate)
2" king pin
Rear underrun protection as per EC directive
Side protection as per EC directive
Sliding step ladder at rear
Door retainer
Two mechanical landing legs, 2 x 12 t, semi-round with base plate
Single-sided operation of landing legs, rear right
3 axles, each rated for 9,000 kg
BPW axles, 19.5", with air suspension (total stroke 260 mm) and disc brake (ET 120)
Brake disc diameter: 370 mm
With lift/lowering function incl. automatic driving height reset
Load-dependent fully automatic electronic lift axle control for 1st axle
Load-dependent fully automatic electronic lift axle control for 3rd axle
Manual control at operator console for forced lifting (=start aid as per Directive 97/27/EC) and forced lowering via rotary switch
Note: Reduced ground clearance in the area of the lift axles!
Axle lift control sequence: 3rd axle lifts first / lowers last
Plastic wheel covers (mudguards)
Splash guard device as per EC directive
Brake system as per ECE Regulation 13 (incl. vehicle stability control)
Spring-actuated parking brake
Brake line connections at the front approx. 675 mm above platform
Diagnostics via ISO7638 connector (EBS power supply cable)
Standard air connectors ISO 1728 (Palm couplings)
Brake system manufacturer: Wabco
EBS system, 2S/2M, 2 sensors on one axle
Lighting and signal system as per ECE R48
2 LED license plate lights
2 outline marker lights with rubber arm, LED version
LED side marker lights with indicator function
Electrical connections at front approx. 450 mm above platform
24 Volt supply, 7-pin socket DIN ISO 1185 at the front
7-pin socket DIN ISO 3731 at the front, for additional functions
Additionally, 15-pin socket DIN ISO 12098 at the front
Multifunction rear lights
Steel rear corner bumpers

Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.