Työalustallinen puoliperävaunu

FAYMONVILLE Telemax Sattelauflieger - hydr. gelenkt

You can find our complete vehicle inventory with immediately and short-term available vehicles on our website.

Extract from the equipment. Full specification available on request.

LOAD AREA:
* Gooseneck, length approx. 4,300 mm, with central beam
* Load floor in double-extendable design, length approx. 9,300 mm
* A support plate approx. 200 mm wide is permanently welded to the center beam
* Pneumatic locking system with conical locking pin and reinforced locking positions, supply lines are protected within the extendable beams and automatically adjust to each load floor length (except for the supply to the first lock)
* Technical fifth wheel load: 25,000 kg For tractor units: 4x2, 6x2 and 6x4
* TPMS tire pressure monitoring system in accordance with ECE R 141
* BPW axles and suspension, all axles hydro-mechanically forced-steered, mounted on turntables
* Technical axle load: 12,000 kg each
* Air suspension with lift and lowering valve
* 275/70 R 22.5 3PMSF twin tires. Brand of our choice
* ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets
* 3 kW electro-hydraulic unit for hydraulic operations. Without installation of supply connectors on the tractor unit
* 4 pairs of recessed lashing rings in the outer frame of the gooseneck, foldable outwards
* At the kingpin 1 pair of lashing rings (LC 10,000 daN), all other lashing rings (LC 5,000 daN)
* 4 pairs of stake pockets recessed in the outer frame of the gooseneck, for plug-in stakes approx. 100 x 50 mm
* 1 transverse stake pocket rail mounted in the load floor of the gooseneck, for plug-in stakes approx. 100 x 50 mm. 1x rear of the gooseneck
* 2" kingpin
* Mechanical landing legs with 2-speed gearbox and crank
Csdpfxoxc Axxo Ahxopu
* Approx. 32 mm hardwood floor on gooseneck and load area enclosed in ALU-omega profiles
* 10 pairs of recessed lashing rings in the outer frame of the load area, foldable outwards: - one pair in front of the last axle and at the rear cross member of the trailer (LC 10,000 daN each), all other lashing rings (LC 5,000 daN)
* 8 pairs of stake pockets recessed in the outer frame of the load area, for plug-in stakes approx. 100 x 50 mm
* 1 lockable stainless steel toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the load floor on the left in direction of travel
* Remote steering (front and rear) operable via cable remote control, with single-track tracking of the axles, without installation in the tractor unit
* Steel front wall, approx. 1,800 mm high, certified version according to EN12642:2016 XL
* Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917)
* 1 LED work light each left and right at the landing legs, wired to the tractor unit connector
* 3 transverse stake pocket rails mounted in load floor of load area, for plug-in stakes approx. 100 x 50 mm
* 1 additional removable platform, approx. 500 mm wide, for large cross-section sliding tube, with hardwood covering
* 1 additional lockable stainless steel toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the load floor on the right in direction of travel
* 1 additional lockable stainless steel toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the load floor on the left in direction of travel
* WADER container pockets in the load area for transport of: 1x 20' container at weight center, 2x 20' containers, 1x 40' container
* 1 LED work light each left and right in front of the axles

Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.