Kippipuoliperävaunu

KEMPF SKM 35/3 ARB Alumulde Kipper 34m³ Getreideschieb

Kempf SKM 35/3 ARB aluminum half-round tipper trailer, 34m³ capacity
with grain slider / swinging rear wall / ALCOA aluminum rims,
loaded saddle height approx. 1,180 mm
----### Aluminum body with plastic coating, plate thickness 12.5 mm ###----

Aluminum tipping body,
with plastic coating,
Payload: 29,560 kg,
Wabco Smart Board,
1st axle liftable,
Roll tarp with single-sided folding to front right, with central locking in front left
2x LED work lights at the rear,
BPW axles,
Standing platform with safety grating, with protective railing and access ladder,
Foldable rear underride guard,
1x drop support,
Disc brakes,
Broom and shovel holder attached to bulkhead,
Air suspension,
Swivel tailgate (2-hook locking),
1x grain discharge slider,
1x storage box right,
1x storage box left,
Fenders on all wheels,
1x ladder,
1x 15-pin socket,
1x ABS,
Chassis and wheel hub paint: deep black RAL 9005,
Body paint: blood orange RAL 2002,
Load area dimensions LxWxH: 7,700 x 2,300 - 2,350 x 1,900 - 2,000 mm,
Body volume: 34 m³,
Sidewall height: approx. 1,983 mm,
Loading height: approx. 3,642 mm,
External dimensions LxWxH: 9,300 x 2,550 x 3,642 mm,
Wheelbase: 3,650 x 1,320 x 1,320 mm,
Tires: 385/65R22.5 on ALCOA alloy rims,
Tread depth left front: 11 mm,
Tread depth left middle: 7 mm,
Lsdjwy Eycepfx Abweak
Tread depth left rear: 9 mm,
Tread depth right front: 10 mm,
Tread depth right middle: 14 mm,
Tread depth right rear: 9 mm,

Additional features:

New lightweight chassis (tapering towards the front).
Web plate of longitudinal members perforated. All add-on parts hot-dip galvanized.
BPW tapered roller bearing axles with disc brakes.
Airlight II axle unit, off-road version with reinforced axle body and 70 mm wide, 62 mm thick reinforced radius rods.
1st axle as lift axle, fully automatic and as traction aid, raised when loaded via switch in cab – speed-dependent as per EU regulations, with forced lowering for unladen running.
Disc wheels 11.75 x 22.5, ALCOA alloy wheels, Dura-Bright, ET 120, 26 mm bore.
Suspension with lifting and lowering device (rotary slide valve), quick release.
Electronic braking system (EBS), Wabco make, parking brake via spring actuators.
SmartBoard information module – Wabco make:
Visual indicator for diagnostic and trailer-specific brake data (e.g., brake pad wear indicator), including connector kit for brake caliper and wear indicator.
Aluminum air tanks, 2 x 60 liters.
2" kingpin with mounting plate.
Support with custom-made aluminum drop-leg on the right (for coupling/uncoupling only when unladen!).
Hydraulic high-pressure front tipping cylinder (Georg/Hyva make), fully hard-chromed, operating pressure 250 bar in 3-point mount, all lines and fittings, single-circuit hydraulic system.
Electrical lighting system, 1x 15-pin socket.
Aluminum ladder, approx. 2,800 mm, removable from chassis.
Foldable aluminum underride guard at rear of chassis compliant with EU directives, drivable.
Tow hook integrated in underride guard brackets.
Half-round aluminum tipper made of wear-resistant aluminum alloys, sloping front bulkhead.
Floor pan made of 7 mm aluminum sheet, base width 1,500 mm. Additionally fitted with a central longitudinal stiffener between the crossmembers.
Side and front walls made of 5 mm aluminum sheet.

Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.