Työalustallinen puoliperävaunu

ES-GE 3-Achs Sattelanhänger - Bordwände + CV

You can find our complete inventory of vehicles, including those available for immediate and short-term delivery, on our website.

Excerpt from the equipment list. Full specification available upon request.

Chassis:
* Welded construction made from high-quality steel profiles with through-crossmembers, designed for high point loads

Coupling Device:
* 2-inch kingpin

Landing Gear:
* 2 x 12 t landing legs with compensating foot, single-sided operation on the right (FR)

Axles:
* 3 x 9 t air suspension axle units
* Brand: SAF, with disc brakes approx. 430 x 45 mm
* ABS
* Hub-centric wheel connection, 10-hole, with offset 120 mm
* Total air suspension lift approx. 200 mm, of which raising approx. 140 mm and lowering approx. 60 mm, controlled by rotary valve with detent function

Brake System:
* Dual-line compressed air brake system according to EU standard, with EBS and RSS, automatic load-dependent control
* Spring-loaded cylinders as parking brake
* Mistake-proof coupling heads fixed to the front cross member, without connector to the tractor unit

Tires:
Bledpewx Db Aefx Ahuec
* 6 units, 385/55 R22.5 160J on steel rims 11.75 x 22.5 offset 120, brand of our choice

Mudguards:
* According to EU standard, PVC mudguards in front of and behind the axle assembly

Spare Wheel Carrier:
* 1 double basket with mounting material for a spare wheel with offset 120

Load Securing:
* 9 pairs of foldable lashing rings, evenly distributed, traction approx. 8.0 t
* 8 pairs of foldable lashing rings, evenly distributed, traction approx. 2.5 t
* Outer frame drilled every approx. 500 mm for lashing belts

Front Wall:
* Reinforced steel construction, fixed
* Interior lined with approx. 9 mm phenolic plywood (approx. 1,250 mm high)

Floor:
* Approx. 28 mm Z-hardwood floor recessed in outer frame

Lighting System:
* According to EU standard, 24V, with multi-chamber lights
* LED side marker lights
* LED position lights white at front
* LED outline marker lights at rear
* Number plate lights
* 1x 15-pin and 2x 7-pin sockets on the front cross member

Equipment:
* ECE 70 warning plate
* Bracket for rotating beacon (without beacon)

Paintwork:
* Chassis and front wall sandblasted, primed and finished in a single color
* Chassis: RAL 3002 flame red
* Drop sides: anodized
* Drop side supports: RAL 3002 flame red
* SSV: aluminium anodized
* Hubs: KTL
* Underride guard: white (RAL 9010)
* Attachments: galvanized/black KTL
* Rims: silver

Accessories:
* First axle liftable, with fully automatic, load-dependent lift control
* 10 pairs of stanchion pockets in outer frame, evenly distributed
* 4 rows of stanchion pockets across the loading area
* 20 stanchions made of galvanized tube 80/50, total length approx. 1,000 mm
* Magazine for 20 plug-in stanchions inside the front wall
* Drop sides: 5 x 250 mm drop sides and rear wall made of anodized aluminium hollow profiles, foldable and removable, detachable Kinnegrip stanchions
* Side and stanchion magazine: insertion rails for drop sides and stanchions under the chassis on left and right
* Container locks for 1 x 40' and 2 x 20' containers at the rear, container lock for 1 x 20' container in the center
* Work spotlight on lamp bracket
* 2 stainless steel toolboxes, approx. 600 x 500 x 500 mm

Extras: Rental available

Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.