Ikäyvä lattiasemitraileri

KNAPEN 3-Achs-Schubbodenauflieger 92m³

You can find our complete range of vehicles, including units available for immediate delivery or at short notice, on our website.

Below is an excerpt of the specifications. The full equipment list is available on request.

Vehicle
* The semi-trailer features a self-supporting chassis constructed from high-quality S700 steel
* The chassis frame extends from the landing legs to the rear
* 2-inch kingpin mounted on an approx. 10 mm thick fifth wheel plate (St 52-3)
* Fifth wheel plate rated for a maximum kingpin load of 15,000 kg

Axles
* 3 x 9-t Knapen HD axles, rigid, with approximately 430 mm disc brakes, 10 bolts, ET 120
* Standard control console with gauges and controls for air suspension, positioned on the left in front of the axles
* First axle as a lift axle, fully automatic via EBS, including starting aid (3x brake engagement)
* Radio remote control

Tyres and Rims
* 6 x steel rims
* 6 x tyres 385/65 R22.5
Bwedpfx Ajwqlg Rjaxjw

Attachments
* Steel landing legs with tiltable base, maximum support load: 50 t, maximum lift capacity: 24 t
* 6 x semi-circular mudguards
* Anti-spray mats fitted behind the third axle
* Standard lighting plate with cover flap
* Rear closure bar
* Fixed mudflap mounted under the bumper
* Bumper in accordance with R58-03, height approx. 375 mm, ground clearance approx. 450 mm
* Plastic toolbox with bottom hinge, approx. dimensions 1,000 x 500 x 500 mm, fitted left rear behind the axles
* Aluminium side impact protection, open design, foldable to comply with EC regulations
* One long ladder, mounted behind side guard or underneath the trailer
* One extendable ladder with platform for easy access, mounted at the rear of the trailer
* 2 wheel chocks, positioned twice on the left
* Broom and shovel holder, mounted to the right in front of the axles

Floor
* CARGOFLOOR CF 500 SL-C system
* The CARGOFLOOR system is equipped with E-Control
* Smooth aluminium floor planks, approx. 10 mm, 21 planks
* Floor planks fitted with aluminium end caps
* Stainless steel plate fitted underneath the rear floor area for extra wear protection

Front Bulkhead
* Largest platform available on the market is mounted to the front bulkhead
* 2 ladders on the front bulkhead, positioned left and right
* Door integrated into the bulkhead for easy frontal access to the trailer, positioned left, outward opening

Movable Partition Wall
* For complete unloading, the trailer is equipped with a movable partition wall made of aluminium, including a brush to prevent contamination of guide rails
* Ground clearance approx. 100 mm

Side Walls
* Extra robust upper edge profile with rail for movable partition wall
* Upper edge profile with groove for installation of roller tarp cord
* Side walls consist of approx. 3 mm inner and 2 mm outer panels
* Inner wall panels are continuously welded along the full height for maximum strength and minimal contamination
* Welding performed by high-quality, fully automatic processes
* Includes side protection tarp, left side

Rear
* Rear doors fully welded from wall and frame profiles for increased strength
* Doors equipped with pneumatic safety lock for safe unloading
* Through-loading height at closed rear top rail approx. 2,665 mm
* Single heavy-duty stainless steel locking bar per rear door

Top Rail
* Steel top rail with wedge

Roof Bows
* 4 units

Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.