Ikäyvä lattiasemitraileriKNAPEN
K100 A5060*92m³*LiftA*CargoFloor*
Ikäyvä lattiasemitraileri
KNAPEN
K100 A5060*92m³*LiftA*CargoFloor*
kiinteä hinta ei sisällä ALV
61 500 €
(73 185 € bruttomassa)
Valmistusvuosi
2024
Kunto
Käytetty
Sijainti
Steinfeld 

Näytä kuvat
Näytä kartta
Perustiedot
Hinta ja sijainti
kiinteä hinta ei sisällä ALV
61 500 €
(73 185 € bruttomassa)
- Myyjän sijainti:
- Rienshof 2, 49439 Steinfeld, Saksa
Soita
Tekniset tiedot
- Kokonaispaino:
- 27 000 kg
- Akselikokoonpano:
- 3 akselia
- Kuormatilan tilavuus:
- 92 m³
- Ensirekisteröinti:
- 01/2025
- Seuraava tarkastus (TÜV):
- 01/2026
- Kokonaisleveys:
- 2 550 mm
- Kokonaiskorkeus:
- 4 000 mm
- Varusteet:
- ABS
Tarjouksen tiedot
- Listaustunnus:
- A192-10-461
- Viitenumero:
- 13312 / SF 678
- Päivitetty viimeksi:
- 14.08.2025
Kuvaus
VIN: XPNK0C100RD108497
Hnsdpfx Aswmkh Sjbmsu
Factory warranty:
According to the general terms and conditions of Trailned B.V., 2 years of 100% warranty on the construction of Knapen trailers, 2 years of 100% warranty on the paintwork of the body. For all other components, we apply the warranty conditions of the respective supplier.
Dimensions:
Coupling height: 1,150 mm
Overall length: 14,040 mm
Internal length: 13,530 mm
Internal width: 2,480 mm
Axle distance between 1+2, 2+3 axles: 1,310 mm
Ground clearance below rear underrun guard: 450 mm
Volume: 92 m³
german specification
Axles:
3 x Knapen 9 t HD AXLE rigid with 430 mm disc brakes, 10 studs, offset 120 mm
Standard control console with manometers and controls for air suspension
1st axle lift axle, fully automatic via EBS, including start assist (3x brakes), radio remote control
WABCO OptiTire tyre monitoring system
6 x steel rims, tyres 385/65R22.5
Attachments:
Support legs with air suspension foot, 6 x semi-circular wheel covers
Anti-spray mats mounted behind 3rd axle
Standard lighting plate + cover
Fixed mud flaps on rear underrun guard
Plastic toolbox 1,000 mm x 500 mm x 500 mm on the left
Aluminium ladder on the left
Floor:
CARGOFLOOR CF 500 SL-C system equipped with E-control
21 ribbed aluminium floor boards, 10 mm thick, welded aluminium end caps
A stainless steel plate is mounted below the rear of the floor for additional wear protection
Body:
Largest platform on the market mounted on the front wall, 2 x access ladders mounted left and right
Moveable aluminium partition wall for complete unloading of the trailer
Guide rail brushes, ground clearance 100 mm
Extra strong upper edge profile with rails for the moveable partition wall
Upper edge profile with groove for securing the sliding tarp
Side walls consist of 3 mm interior and 2 mm exterior, continuously welded
Rear doors are fully welded from wall and frame profiles for added strength
With pneumatic safety lock (door security)
Rotating steel top belt with wedge and lock, operable from the ground on the right
4 x round bows, diameter 60.3 mm
The bow storage area is divided into 3 sections of approx. 4,100 mm each
Extra strong sliding tarp 900 g/m²
4 tie-down straps
Tarp overhang left 400 mm
4 x foldable tarp supports mounted
Customs registration and insurance available for an additional charge upon request!
For export business, we can handle export declaration and registration upon request for reimbursement of costs. For exports to non-EU countries, a deposit of 19% of the purchase price will be retained. This will be refunded to the buyer after successful customs clearance or delivery. For further information please contact Mr. Lübberding by mobile/WhatsApp.
Please always arrange an appointment for inspection/test drive! We look forward to your visit. The information provided online is non-binding and does not constitute guaranteed properties.
Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.
Hnsdpfx Aswmkh Sjbmsu
Factory warranty:
According to the general terms and conditions of Trailned B.V., 2 years of 100% warranty on the construction of Knapen trailers, 2 years of 100% warranty on the paintwork of the body. For all other components, we apply the warranty conditions of the respective supplier.
Dimensions:
Coupling height: 1,150 mm
Overall length: 14,040 mm
Internal length: 13,530 mm
Internal width: 2,480 mm
Axle distance between 1+2, 2+3 axles: 1,310 mm
Ground clearance below rear underrun guard: 450 mm
Volume: 92 m³
german specification
Axles:
3 x Knapen 9 t HD AXLE rigid with 430 mm disc brakes, 10 studs, offset 120 mm
Standard control console with manometers and controls for air suspension
1st axle lift axle, fully automatic via EBS, including start assist (3x brakes), radio remote control
WABCO OptiTire tyre monitoring system
6 x steel rims, tyres 385/65R22.5
Attachments:
Support legs with air suspension foot, 6 x semi-circular wheel covers
Anti-spray mats mounted behind 3rd axle
Standard lighting plate + cover
Fixed mud flaps on rear underrun guard
Plastic toolbox 1,000 mm x 500 mm x 500 mm on the left
Aluminium ladder on the left
Floor:
CARGOFLOOR CF 500 SL-C system equipped with E-control
21 ribbed aluminium floor boards, 10 mm thick, welded aluminium end caps
A stainless steel plate is mounted below the rear of the floor for additional wear protection
Body:
Largest platform on the market mounted on the front wall, 2 x access ladders mounted left and right
Moveable aluminium partition wall for complete unloading of the trailer
Guide rail brushes, ground clearance 100 mm
Extra strong upper edge profile with rails for the moveable partition wall
Upper edge profile with groove for securing the sliding tarp
Side walls consist of 3 mm interior and 2 mm exterior, continuously welded
Rear doors are fully welded from wall and frame profiles for added strength
With pneumatic safety lock (door security)
Rotating steel top belt with wedge and lock, operable from the ground on the right
4 x round bows, diameter 60.3 mm
The bow storage area is divided into 3 sections of approx. 4,100 mm each
Extra strong sliding tarp 900 g/m²
4 tie-down straps
Tarp overhang left 400 mm
4 x foldable tarp supports mounted
Customs registration and insurance available for an additional charge upon request!
For export business, we can handle export declaration and registration upon request for reimbursement of costs. For exports to non-EU countries, a deposit of 19% of the purchase price will be retained. This will be refunded to the buyer after successful customs clearance or delivery. For further information please contact Mr. Lübberding by mobile/WhatsApp.
Please always arrange an appointment for inspection/test drive! We look forward to your visit. The information provided online is non-binding and does not constitute guaranteed properties.
Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.
Toimittaja
Huomautus: Rekisteröidy ilmaiseksi tai kirjaudu sisään, saadaksesi kaikki tiedot.
Rekisteröity alkaen:: 2009
Lähetä pyyntö
Puhelin & Faksi
+49 5492 ... ilmoitukset
Ilmoituksesi on poistettu onnistuneesti
Tapahtui virhe