Matala lavettipuoliperävaunuGOLDHOFER
STZ-L5 (245)A ausziehbar 4 x hydr. gelenkt
Matala lavettipuoliperävaunu
GOLDHOFER
STZ-L5 (245)A ausziehbar 4 x hydr. gelenkt
Kunto
Uusi
Sijainti
Landsberg am Lech 

Näytä kuvat
Näytä kartta
Perustiedot
Hinta ja sijainti
- Myyjän sijainti:
- Robert-Bosch-Str. 10, 86899 Landsberg am Lech, Saksa
Soita
Tekniset tiedot
- Kokonaispaino:
- 76 000 kg
- Maksimi kuormauspaino:
- 61 800 kg
- Akselikokoonpano:
- 3 akselia
Tarjouksen tiedot
- Listaustunnus:
- A189-61-301
- Päivitetty viimeksi:
- 13.10.2025
Kuvaus
Dimensions B 11,970 mm
Curb weight 11,200 kg
With air suspension, hydromechanical forced steering, easily telescopic loading bed, with access ramps
STZ-L gooseneck
- Robust welded steel construction
- Designed loading bed 3,700 x 2,480 mm
- Beveled edge
- Hydromechanical forced steering (dual-circuit steering) in a flat design
(Overall height 235 mm) with adjustable guide elements
- Ball-bearing fifth wheel with replaceable 2" kingpin
and adjustable steering wedge
- Mechanical seat supports
Loading bed
- Easily telescopic, designed as an outer/inner tube construction
with a 700 mm long, fixed loading bed section at the front
- Locking of the extension steps via spring-loaded cylinders
Chassis
- Air-sprung 5-axle chassis,
- Axle assembly BPW (Eco), consisting of one leading-steer axle and three+
hydromechanically forced-steer steering pivot axles
- Axles with adjustable tapered roller bearings and automatic slack adjusters (AGS)
- Lifting and lowering valve as standard for lowering to a minimum of 790 mm
or raising to a maximum of 1000 mm
- 1 axle can be lifted
Rear of the vehicle
- Straight design with climbing rails
- Short 1,260 mm overhang from the center of the last axle
- Hydraulic rear support
Load-up ramps
- 2-part loading ramps with a length of 2,750 mm / 1,550 mm, a width of 800 mm
- Maximum load capacity per pair of ramps: 50,000 kg
- Hydraulic ramp adjustment
- Overall length of the ramps in transport position from the rear edge of the vehicle rear: 300 mm
Braking system
- Dual-line all-wheel drive air brake system with diaphragm brake cylinders
- Automatic load-sensing brake (ALB)
- Automatic brake adjuster (AGS)
- Parking brake with spring-loaded cylinders
- Anti-lock brake
Special equipment
- Extendable extensions
Hfjdpswcy Rzefx Abmsn
- Central lubrication system "BekaMax"
- All lashing eyes installed that can be ordered
- Electro-hydraulic power unit with radio remote control
- Lifting option (load-dependent) for the first axle
Technical specifications
Gooseneck
Loading area (LxW): 3,700 x 2,480 mm
Overall height over fifth wheel coupling: 235 mm
Fifth wheel height when loaded: 1,250 mm
Loading area
Loading area (LxW) 9,300 x 2,550 mm
Telescopic by 4,465 mm
Loading height when loaded: 855 mm (+140-60) mm)
2nd driving position: 895 mm (+/-100 mm)
Steering
1st axle with leading steering and liftable
3rd and 5th axles with hydromechanical forced steering (dual-circuit steering)
Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.
Curb weight 11,200 kg
With air suspension, hydromechanical forced steering, easily telescopic loading bed, with access ramps
STZ-L gooseneck
- Robust welded steel construction
- Designed loading bed 3,700 x 2,480 mm
- Beveled edge
- Hydromechanical forced steering (dual-circuit steering) in a flat design
(Overall height 235 mm) with adjustable guide elements
- Ball-bearing fifth wheel with replaceable 2" kingpin
and adjustable steering wedge
- Mechanical seat supports
Loading bed
- Easily telescopic, designed as an outer/inner tube construction
with a 700 mm long, fixed loading bed section at the front
- Locking of the extension steps via spring-loaded cylinders
Chassis
- Air-sprung 5-axle chassis,
- Axle assembly BPW (Eco), consisting of one leading-steer axle and three+
hydromechanically forced-steer steering pivot axles
- Axles with adjustable tapered roller bearings and automatic slack adjusters (AGS)
- Lifting and lowering valve as standard for lowering to a minimum of 790 mm
or raising to a maximum of 1000 mm
- 1 axle can be lifted
Rear of the vehicle
- Straight design with climbing rails
- Short 1,260 mm overhang from the center of the last axle
- Hydraulic rear support
Load-up ramps
- 2-part loading ramps with a length of 2,750 mm / 1,550 mm, a width of 800 mm
- Maximum load capacity per pair of ramps: 50,000 kg
- Hydraulic ramp adjustment
- Overall length of the ramps in transport position from the rear edge of the vehicle rear: 300 mm
Braking system
- Dual-line all-wheel drive air brake system with diaphragm brake cylinders
- Automatic load-sensing brake (ALB)
- Automatic brake adjuster (AGS)
- Parking brake with spring-loaded cylinders
- Anti-lock brake
Special equipment
- Extendable extensions
Hfjdpswcy Rzefx Abmsn
- Central lubrication system "BekaMax"
- All lashing eyes installed that can be ordered
- Electro-hydraulic power unit with radio remote control
- Lifting option (load-dependent) for the first axle
Technical specifications
Gooseneck
Loading area (LxW): 3,700 x 2,480 mm
Overall height over fifth wheel coupling: 235 mm
Fifth wheel height when loaded: 1,250 mm
Loading area
Loading area (LxW) 9,300 x 2,550 mm
Telescopic by 4,465 mm
Loading height when loaded: 855 mm (+140-60) mm)
2nd driving position: 895 mm (+/-100 mm)
Steering
1st axle with leading steering and liftable
3rd and 5th axles with hydromechanical forced steering (dual-circuit steering)
Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.
Toimittaja
Huomautus: Rekisteröidy ilmaiseksi tai kirjaudu sisään, saadaksesi kaikki tiedot.
Rekisteröity alkaen:: 2025
Lähetä pyyntö
Puhelin & Faksi
+49 8191 ... ilmoitukset
Ilmoituksesi on poistettu onnistuneesti
Tapahtui virhe