Työalustallinen perävaunu

MÜLLER-MITTELTAL 14,4 to. Plateau, Luft, 3 m. Cont.- Verriegelung

* ETÜ-TA-ER 14.4 Platform:

----Brakes:

* EBS (electronic braking system)
* Emergency release system for spring brake cylinders
* Drum brakes

----Axles:

* 2 x 7-ton BPW axles

----Suspension:

* Air suspension with lifting and lowering system

----Drawbar / Flange coupling:

* Drawbar, height-adjustable by 300 mm
* Drawbar shortened by approx. 200 mm to approx. 1,800 mm (resulting in a B-dimension of approx. 8,080 mm)
* 40 mm flange coupling

----
Electrical system / Lighting:

* 15-pin power connector
* LED lighting system 12 / 24 V
* 2 LED reversing lights, additional at the rear (switched via reverse gear)
* 1 LED rotating beacon (removable incl. bracket) at the rear
* TPMS (Tire Pressure Monitoring System)

----General components:

* Mechanically adjustable 3 m warning sign package at the front and rear
* Front support winch
* Outboard folding supports at the rear
* Plastic toolboxes approx. 750 x 350 x 300 mm, each on the left and right side
* Lateral impact protection
* Underrun protection
* Plastic quarter fenders

----Loading area:

* 400 mm high bolted front bulkhead
* 50 mm hardwood flooring
* 2 pairs of container locking devices (extendable to 3 m container outer width) and lockable, locking dimension retracted according to ISO - DIN 15190 = 2,259 mm. Container locking devices extended = 2,819 mm (this dimension is not according to DIN) with an absolute outer width of 3,000 mm

----Load securing:

* Perforated outer frame, bent at approx. 45 degrees with 2-ton lashing force every 480 mm
* Installation of 3-ton lashing eyes possible every 600 mm - 5 x 3-ton UVV lashing eyes installed on each side -
* 1 x 6.3-ton lashing point in each corner, front and rear (at the front directly behind the container locking devices in the wooden floor and at the rear in the end beam)
* Various holes in the front and end beams for 1.2-ton lashing options

----Ramps:

* 1 pair of aluminum sliding ramps approx. 3,570 x 410 mm (load capacity 10 tons / pair) suitable for rubber-tired and tracked vehicles
* Storage compartment recessed in the chassis below the loading area from the rear

----Painting:

* ---Chassis, drawbar, front bulkhead, underrun protection and rear supports hot-dip galvanized---
* Axles, air tank, front support winch and flange coupling painted in a black tone
----Information:

* New vehicle with manufacturer's warranty
* Errors and prior sale reserved

----Delivery time:

Ledpsv D Tbkofx Algehh
* Available from week 39/2026

Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.