Irrotettava hytti

Unimog U1300L Leerkabine

Example display - the cases are manufactured according to customer requirements
this may also change the price

Model: MWK 3.7 / empty cabin
for installation on: Unimog U1300L 435.115

MEREX living cabin MWK 3.7
External dimensions: L 3700 / 3200mm x W 2360mm x H 2145 mm
Internal dimensions: L 3580 / 3140mm x W 2240mm x H 2000 mm
The scope of this item includes the living structure with
GRP external and internal angles, as well as stainless steel
corner reinforcements. Full-surface bonding of the profiles with 2-component PU adhesive.

Wall and ceiling structure
Walls and ceilings made of GRP sandwich panels, 60mm thick.

These consist of a 3 mm thick cover layer on the outside,
fabric-reinforced, and a 2 mm thick cover layer made of glass fiber reinforced, unsaturated polyester on the inside. The sandwich panel is given stability and the best insulation properties by a closed-pore polyurethane (PU) rigid foam core. The
Gjdpfx Aevvqm Iobmeuh
density is 50 kg per cubic meter. The K value is 0.44 W per
square meter (cabin exterior wall).

Floor panel structure
Floor structure from outside to inside: 2 mm GRP cover layer, 70 mm thick PU foam with 6 steel tubes across, 12 mm thick
waterproof glued plywood panel with 1 mm GRP cover layer.
The transverse steel tubes consist of square tubes
70x70x3 with welded-in flat steel 60x8 for inserting threads for the floor assembly.

Total thickness of the panels
Floor plate: 85 mm, side walls: 60 mm, front and
rear wall: 60 mm, roof: 60 mm

Extras:
- Rear slope 45 degrees
- Shock absorber shells
- Thread for floor assembly
- Paint on underside of floor plate
- Rear wall reinforcement
- Rear marker lights
- 3x ceiling light LED technology

We are happy to offer you an individual empty cabin according to your wishes.

Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.