Matala lavetti perävaunu

MÜLLER-MITTELTAL Agrar Tand. 3- Seiten, hydr. Heckklappe, Rampen

* KA-TA-RT 21.0 ML

----Brakes:

* Without ABS/EBS, approved for 40 km/h
Codpfer Dpz Hsx Alzorc
* Spring brake parking brake
* Drum brakes

----Axles:

* Gigant axles

----Suspension:

* Tandem equalizer with 100 mm wide parabolic springs

----Drawbar/Drawtube:

* Fixed welded drawtube with low-maintenance cap for K80 ball coupling (adjustable by +77 mm / 33 mm via the head plate) with a high-mounted gantry for the connection lines

----Electrical System/Lighting:

* 12 V, 7 + 4-pole power cable
* LED lighting system 12/24 V with protective grille
* 2 LED work lights at the rear, switchable from the towing vehicle without installation on the towing vehicle side

----General Components:

* Front support jack
* Mechanical drop-down supports at the rear
* Side marker lights with turn signal control
* Plastic quarter fenders
* Plastic toolbox, approx. 750 x 350 x 300 mm, on the right side
* Hot-dip galvanized, two-step access ladder in front of the front panel (FR, left)

----Chassis:

* Chassis made of fine-grain steel

----Tipping Body:

* Steel pallet-sided 3-way tipping body with M-Strong side walls (front wall fixed, continuous side walls – without center rails – pivoting via manual central locking as well as mechanically foldable with side wall spring lifters)
* Hydraulic tailgate, 500 mm high, as a hydraulic dump gate with a 115° opening angle
* 4 mm Hardox 450 steel floor

----Load Securing:

* 1 x 7 t lashing points each in the corners - recessed and foldable
* 4 x 3 t lashing points each on the sides - recessed and foldable

----Ramps:

* 1 pair of aluminum loading ramps (10 t/pair with axle spacing over 2,500 mm), 3,570 x 410 x 120 mm, suitable for vehicles with rubber tires and tracked vehicles
* 2 storage compartments for aluminum loading ramps, recessed in the rear of the chassis, load securing according to EN 12642 XL

----Coupling Height:

* Loaded approx. 530 mm & unloaded approx. 590 mm

----Painting:

* Body paint in RAL 9010 pure white
* Chassis, drawtube, rear drop-down supports, underrun protection, hot-dip galvanized
* Axles, air tank, front support jack
* K80 coupling painted in a black tone

----Information:

* New vehicle with manufacturer's warranty
* Errors and prior sale reserved

----Delivery Time:

* Immediately available from Egestorf

Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.