Matala puoliperävaunu rakennuskoneiden kuljetukseenFaymonville
5-Achs-Doppel-Tele-Semi-Sattelauflieger
Matala puoliperävaunu rakennuskoneiden kuljetukseen
Faymonville
5-Achs-Doppel-Tele-Semi-Sattelauflieger
Kunto
Uusi
Sijainti
Dortmund 

Perustiedot
- Valmistaja:
- Faymonville
- Kunto:
- uusi
Hinta ja sijainti
- vuokraus:
- on mahdollista
- Sijainti:
- Martener Hellweg 100, 44379 Dortmund, Deutschland

Soita
Tekniset tiedot
Mitat ja paino
Kokonaispaino:
80 000 kg
Omamassa:
15 450 kg
Maksimi kuormauspaino:
65 550 kg
Kuormatilan pituus:
21 900 mm
Lastitilan leveys:
2 540 mm
Kuormatilan korkeus:
925 mm
Akselit ja pyörät
Akselikokoonpano:
> 3 akselia
Jousitus:
ilma
Renkaan koko:
235/75 R 17.5
Turvaominaisuudet
ABS
Lisätietoja
Väri:
harmaa
Tarjouksen tiedot
- Ilmoituksen tunnus:
- A149-15-164
- Päivitys:
- viimeksi 09.10.2026
Kuvaus
Gooseneck:
Gooseneck in SNT design to optimize the loading area length, length approx. 3,700 mm, rear with bevel approx. 1,000 mm x 10°
Technical fifth wheel load: 30,000 kg. For tractor units: 4x2, 6x2 and 6x4
Loading area:
Loading area in double-extendable design, length approx. 8,800 mm with bevel at the rear approx. 500 mm x 10°. A support table approx. 300 mm wide with long holes at the front and rear for optional bridging elements that can be hung and moved is welded to the middle support.
Pneumatic locking with conical locking bolt and reinforced locking positions, the supply lines are protected in the extendable supports and automatically adjust to the respective loading area length.
Axles and tires:
BPW axles and suspension, 1st axle with pre-steering, all other axles with hydro-mechanical forced steering.
1st axle with electro-magnetic reversing lock that can be activated via reverse gear and manually. Technical axle load: 12,000 kg Air suspension with lifting and lowering valve
Manufacture of our choice
Sockets and lighting:
24-volt lighting system Design in accordance with EU regulations
ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets
Complete HRM metallization
Complete steel construction shot blasted, then hot-finished with ZINACOR 850
Knodpfxorigw Rj Ac Ujd
Paint:
6-K final treatment: Complete steel construction shot blasted after welding
1 layer of zinc-based base paint, 1 layer of adhesion primer. Final painting with 2 layers of 2-K paint in one color in DB 7350 Nova gray, then sealing of the cavities with special wax
Accessories:
Bulkhead made of steel, pluggable, approx. 400 mm high Connection strip for supply lines to the tractor unit, attached at the height of the outer frame profile ASPÖCK-UNIBOX on the front connection strip with sockets 24N, 24S & 15-pin. If your pin assignment differs from the ISO connection standard, please let us know
3 kW electro-hydraulic unit for controlling the hydraulic processes, with the exception of hydraulic cable winches
On the gooseneck 1 pair of plug-in aluminum side walls, approx. 400 mm high, in anodized design. 3.5" kingpin. Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide
2 brake shoes with bracket in front of the bulkhead. Mechanical seat supports with 2-speed gearbox and crank. Control valves for the hydraulic ramps on the right of the vehicle
1 pair of mechanical rear supports. Central lubrication system with 1 pump, brand BEKAMAX, with normal grease according to NLGI-2
Removable protection around the central lubrication pump(s)
Steering from the front and rear can be operated using a cable remote control via push buttons, with alignment control of the axles, without installation in the tractor unit
Under the gooseneck, as well as on the end cross member, left and right, one 7-pin socket with bracket for the warning signs A 7-pin socket on the end cross member
Manual and description
One INOX storage box, one-piece, approx. 2,480 x 340 x 390 mm in a straight design
Please note that Special equipment and accessories generally increase the dead weight and reduce the payload accordingly
Warning package: 4 warning signs, approx. 423 x 423 mm, extendable by approx. 1,000 mm, including 2 LED position lights and brackets for rotating beacon.
Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.
Gooseneck in SNT design to optimize the loading area length, length approx. 3,700 mm, rear with bevel approx. 1,000 mm x 10°
Technical fifth wheel load: 30,000 kg. For tractor units: 4x2, 6x2 and 6x4
Loading area:
Loading area in double-extendable design, length approx. 8,800 mm with bevel at the rear approx. 500 mm x 10°. A support table approx. 300 mm wide with long holes at the front and rear for optional bridging elements that can be hung and moved is welded to the middle support.
Pneumatic locking with conical locking bolt and reinforced locking positions, the supply lines are protected in the extendable supports and automatically adjust to the respective loading area length.
Axles and tires:
BPW axles and suspension, 1st axle with pre-steering, all other axles with hydro-mechanical forced steering.
1st axle with electro-magnetic reversing lock that can be activated via reverse gear and manually. Technical axle load: 12,000 kg Air suspension with lifting and lowering valve
Manufacture of our choice
Sockets and lighting:
24-volt lighting system Design in accordance with EU regulations
ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets
Complete HRM metallization
Complete steel construction shot blasted, then hot-finished with ZINACOR 850
Knodpfxorigw Rj Ac Ujd
Paint:
6-K final treatment: Complete steel construction shot blasted after welding
1 layer of zinc-based base paint, 1 layer of adhesion primer. Final painting with 2 layers of 2-K paint in one color in DB 7350 Nova gray, then sealing of the cavities with special wax
Accessories:
Bulkhead made of steel, pluggable, approx. 400 mm high Connection strip for supply lines to the tractor unit, attached at the height of the outer frame profile ASPÖCK-UNIBOX on the front connection strip with sockets 24N, 24S & 15-pin. If your pin assignment differs from the ISO connection standard, please let us know
3 kW electro-hydraulic unit for controlling the hydraulic processes, with the exception of hydraulic cable winches
On the gooseneck 1 pair of plug-in aluminum side walls, approx. 400 mm high, in anodized design. 3.5" kingpin. Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide
2 brake shoes with bracket in front of the bulkhead. Mechanical seat supports with 2-speed gearbox and crank. Control valves for the hydraulic ramps on the right of the vehicle
1 pair of mechanical rear supports. Central lubrication system with 1 pump, brand BEKAMAX, with normal grease according to NLGI-2
Removable protection around the central lubrication pump(s)
Steering from the front and rear can be operated using a cable remote control via push buttons, with alignment control of the axles, without installation in the tractor unit
Under the gooseneck, as well as on the end cross member, left and right, one 7-pin socket with bracket for the warning signs A 7-pin socket on the end cross member
Manual and description
One INOX storage box, one-piece, approx. 2,480 x 340 x 390 mm in a straight design
Please note that Special equipment and accessories generally increase the dead weight and reduce the payload accordingly
Warning package: 4 warning signs, approx. 423 x 423 mm, extendable by approx. 1,000 mm, including 2 LED position lights and brackets for rotating beacon.
Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.
Toimittaja
Huomautus: Rekisteröidy ilmaiseksi tai kirjaudu sisään, saadaksesi kaikki tiedot.
Rekisteröitynyt vuodesta: 2007
61 Verkkoilmoitukset
Lähetä kysely
Puhelin & Faksi
+49 231 9... ilmoitukset
Nämä ilmoitukset voivat myös kiinnostaa sinua.
Onnistunut
Viestisi on lähetetty.
Pieni ilmoitus
Gilze
1 703 km
Volvo FH 16 750 8x4 / hidastin / FASSI 71 tm + jatkopuomi
VolvoFH 16 750 8x4 / RETARDER / FASSI 71 TM + JIB
VolvoFH 16 750 8x4 / RETARDER / FASSI 71 TM + JIB
Onnistunut
Viestisi on lähetetty.
Pieni ilmoitus
Büyükkayacık OSB
2 707 km
Matala kuormaaja
GVN Trailer4 Axle Standart Lowbed
GVN Trailer4 Axle Standart Lowbed
Onnistunut
Viestisi on lähetetty.
Pieni ilmoitus
Raalte
1 573 km
Goldhofer THP XLE 8 (3+5)
GoldhoferTHP XLE 8 (3+5)
GoldhoferTHP XLE 8 (3+5)
Onnistunut
Viestisi on lähetetty.
Pieni ilmoitus
Andelst
1 638 km
Volvo FH 480 8x4 vetoauto + Effer 1355/8S nosturi
VolvoFH 480 8X4 TREKKER + EFFER 1355/8S KRAAN/KRAN/C...
VolvoFH 480 8X4 TREKKER + EFFER 1355/8S KRAAN/KRAN/C...
Onnistunut
Viestisi on lähetetty.
Pieni ilmoitus
Heteren
1 633 km
Volvo FH 540 FH 540 8x2 Effer 955 8S + puomijatke 6S
VolvoFH 540 FH 540 8x2 Effer 955 8S + JIB 6S
VolvoFH 540 FH 540 8x2 Effer 955 8S + JIB 6S
Onnistunut
Viestisi on lähetetty.
Pieni ilmoitus
Dortmund
1 603 km
Matala kuormaaja
Faymonville5-Achs-Tele-Semi m. hydr. Rampen
Faymonville5-Achs-Tele-Semi m. hydr. Rampen
Onnistunut
Viestisi on lähetetty.
Pieni ilmoitus
mengen /B 311 am bodensee
1 856 km
Avoin puoliperävaunu pressulla
KRONESEP 10 CITY GARDINE KRONE 1-achs TRIDEC LBW
KRONESEP 10 CITY GARDINE KRONE 1-achs TRIDEC LBW
Onnistunut
Viestisi on lähetetty.
Pieni ilmoitus
Bottrop
1 616 km
Kuorma-autoon asennettu nosturi
MAN35.480 SZM +PK 92002 9x Hydrl. + Aufl.
MAN35.480 SZM +PK 92002 9x Hydrl. + Aufl.
Onnistunut
Viestisi on lähetetty.
Pieni ilmoitus
Legden
1 656 km
Raskas kuorma-auto
MANTGS 18.500 4x4H BLS HydroDrive *Motorschaden*
MANTGS 18.500 4x4H BLS HydroDrive *Motorschaden*
Onnistunut
Viestisi on lähetetty.
Pieni ilmoitus
Raalte
1 573 km
MAN TGA 18.440 4x4
MANTGA 18.440 4x4
MANTGA 18.440 4x4
Ilmoituksesi on poistettu onnistuneesti
Tapahtui virhe

































































































































































































































































