Matala lavetti perävaunu

MÜLLER-MITTELTAL 21 to luftgef. Tandemtieflader mit 3 mtr Rampen

ETÜ-TA-R 21.0:

----Brakes:

* Wabco EBS-E (electronic braking system)
* Emergency release device for spring brake cylinders
* Drum brakes

----Axles:

* 2 x 11 ton Gigant axles

----Suspension:

* Air suspension with lifting and lowering system

----Drawbar / Flange drawbar:

* Drawbar with 50 mm flange drawbar and height-adjustable drawbar

----Lighting / Electrical system:

* 15-pin power connector
* LED lights 12/24 V
* TPMS (tire pressure monitoring system)

----General components:

* Jost support legs at the front
* Outboard folding supports at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm on the right side
* Side impact protection
* Plastic quarter fenders

----Low loader platform:

* In front of the headboard and rear slope, device for subsequent installation of container locking devices for the transport of 20" containers
Bedpfx Aeq Dyu Uemiedd
* Design 21 tons GVW with reinforced frame and reinforced axles
* Reinforcement package for drilling rig transport on the chassis
* 50 mm hardwood flooring in a clamped design
* In front of the headboard, device for subsequent installation of container locking devices
* Bolted headboard made of smooth sheet metal
* Divided side walls made of steel sheet -trapezoidal profile- foldable with folding frame in the middle
* Steel rear wall can be slid in between the ramps - holder when not in use inside in front of the headboard
* Rear frame bolted

----Load securing:

* Perforated outer frame, approx. 45 degrees, with 2 tons lashing force every 480 mm
* Installation of 3 tons drop-side lashing eyes every 600 mm possible
* Profifix lashing rail in the longitudinal axis in the middle for lashing capability up to LC 3000 daN
* In the corners at the front and rear, 1 x 10 tons lashing each
* Lasi package with 2 x 8 tons lashing eyes each, recessed in the outer frame, various holes in the front and end crossmember for 1.2 tons lashing

----Ramps:

* One-piece mechanical grating ramps with spring mechanism for single-person operation approx. 3,000 x 620 mm (can be pushed together to 20 mm)
* Approach slope at the rear approx. 860 mm chassis

----Loading heights:

* Unladen approx. 940 mm
* Laden approx. 910 mm

----Wheelbase / Tires:

* 1,810 mm
* Tires: 235/75R17.5

----Painting:

* Painting of the side panels in a RAL color of your choice (but no special or metallic paint) can be changed up to approx. 6 weeks before completion
* Drawbar, headboard, rear door, folding supports and ramps hot-dip galvanized
* Axles, springs, air tanks and support legs painted in a black color

----Information:

* New vehicle with manufacturer's warranty
* Errors and prior sale excepted
* Sample images

----Delivery time:

* Available from week 29/2026

Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.