Matala lavetti perävaunuMÜLLER-MITTELTAL
14,4 to. Tieflader, luftgefed. mit Auffahrrampen
Matala lavetti perävaunu
MÜLLER-MITTELTAL
14,4 to. Tieflader, luftgefed. mit Auffahrrampen
Kiinteä hinta alv 0% (veroton)
29 900 €
(35 581 € bruttomassa)
Valmistusvuosi
2025
Kunto
Uusi
Sijainti
Egestorf 

Näytä kuvat
Näytä kartta
Perustiedot
Hinta ja sijainti
Kiinteä hinta alv 0% (veroton)
29 900 €
(35 581 € bruttomassa)
- Myyjän sijainti:
- Eichenstich 12, 21272 Egestorf, Saksa

Soita
Tekniset tiedot
- Maksimi kuormauspaino:
- 10 900 kg
- Kokonaispaino:
- 14 400 kg
- Akselikokoonpano:
- 2 akselia
- Kuormatilan pituus:
- 6 270 mm
- Lastitilan leveys:
- 2 470 mm
- Kuormatilan korkeus:
- 400 mm
Tarjouksen tiedot
- Ilmoituksen tunnus:
- A128-69-180
- Viitenumero:
- 6158
- Päivitys:
- viimeksi 19.02.2026
Kuvaus
ETÜ-TA-R 14.4
----Brakes:
* EBS electronic braking system
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Air suspension
----Drawbar / Flanged Towing Eye:
* Drawbar adjustable in height by 300 mm
* Drawbar extension by 250 mm, total length 2,250 mm
* 40 mm flanged towing eye
Nsdpfx Ajpk Dv Rjgzjkw
----Lighting / Electrics:
* TPMS (Tire Pressure Monitoring System)
* LED tail lights 12 / 24 V
* 15-pin power connector
----General Accessories:
* Jost landing gear at the front
* Externally mounted, hot-dip galvanized foldable rear supports
* Plastic toolbox mounted front right on the front wall
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Platform:
* 50 mm softwood flooring
* Preparation for the retrofit of container locks in front of the front wall
* Bolted smooth steel front wall
* Fold-down sidewalls made from trapezoidal steel sheeting with board hoist
* Steel rear wall can be inserted between the ramp mounts and stowed inside in front of the front wall when not in use
* Bolted rear stakes
* Rear slope approx. 860 mm
----Load Securing:
* Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm
* Optional installation of 3 t drop lashing rings every 600 mm
* One 6.3 t lashing ring in each of the front and rear corners
* Various 1.2 t lashing options in the front and rear cross-members
----Ramps:
* Single-piece mechanical grating ramps with spring mechanism for one-person operation, approx. 2,750 x 600 mm (can be telescoped to 20 mm)
----Paintwork:
* Hot-dip galvanized chassis as well as drawbar, front wall, rear wall, tailgate, and ramps
* Sideboard color in RAL 9010 pure white
* Sidewall painting in another RAL color available at extra cost
----Information:
* --Reinforced and certified body according to EN 12642 XL incl. load securing certificate--
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery time:
* Available immediately ex works Egestorf
Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.
----Brakes:
* EBS electronic braking system
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Air suspension
----Drawbar / Flanged Towing Eye:
* Drawbar adjustable in height by 300 mm
* Drawbar extension by 250 mm, total length 2,250 mm
* 40 mm flanged towing eye
Nsdpfx Ajpk Dv Rjgzjkw
----Lighting / Electrics:
* TPMS (Tire Pressure Monitoring System)
* LED tail lights 12 / 24 V
* 15-pin power connector
----General Accessories:
* Jost landing gear at the front
* Externally mounted, hot-dip galvanized foldable rear supports
* Plastic toolbox mounted front right on the front wall
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Platform:
* 50 mm softwood flooring
* Preparation for the retrofit of container locks in front of the front wall
* Bolted smooth steel front wall
* Fold-down sidewalls made from trapezoidal steel sheeting with board hoist
* Steel rear wall can be inserted between the ramp mounts and stowed inside in front of the front wall when not in use
* Bolted rear stakes
* Rear slope approx. 860 mm
----Load Securing:
* Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm
* Optional installation of 3 t drop lashing rings every 600 mm
* One 6.3 t lashing ring in each of the front and rear corners
* Various 1.2 t lashing options in the front and rear cross-members
----Ramps:
* Single-piece mechanical grating ramps with spring mechanism for one-person operation, approx. 2,750 x 600 mm (can be telescoped to 20 mm)
----Paintwork:
* Hot-dip galvanized chassis as well as drawbar, front wall, rear wall, tailgate, and ramps
* Sideboard color in RAL 9010 pure white
* Sidewall painting in another RAL color available at extra cost
----Information:
* --Reinforced and certified body according to EN 12642 XL incl. load securing certificate--
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery time:
* Available immediately ex works Egestorf
Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.
Toimittaja
Huomautus: Rekisteröidy ilmaiseksi tai kirjaudu sisään, saadaksesi kaikki tiedot.
Rekisteröitynyt vuodesta: 2001
180 Verkkoilmoitukset
Lähetä kysely
Puhelin & Faksi
+49 40 33... ilmoitukset
Nämä ilmoitukset voivat myös kiinnostaa sinua.
Ilmoituksesi on poistettu onnistuneesti
Tapahtui virhe
























































