Matala lavetti perävaunuMÜLLER-MITTELTAL
19 to luftgef. Tandemtieflader mit 3 mtr Rampen
Matala lavetti perävaunu
MÜLLER-MITTELTAL
19 to luftgef. Tandemtieflader mit 3 mtr Rampen
kiinteä hinta ei sisällä ALV
33 500 €
(39 865 € bruttomassa)
Valmistusvuosi
2023
Kunto
Uusi
Sijainti
Egestorf 

Näytä kuvat
Näytä kartta
Perustiedot
Hinta ja sijainti
kiinteä hinta ei sisällä ALV
33 500 €
(39 865 € bruttomassa)
- Myyjän sijainti:
- Eichenstich 12, 21272 Egestorf, Saksa

Soita
Tekniset tiedot
- Maksimi kuormauspaino:
- 14 200 kg
- Kokonaispaino:
- 19 000 kg
- Akselikokoonpano:
- 2 akselia
- Kuormatilan pituus:
- 7 000 mm
- Lastitilan leveys:
- 2 470 mm
- Kuormatilan korkeus:
- 400 mm
Tarjouksen tiedot
- Listaustunnus:
- A104-33-225
- Viitenumero:
- 6028
- Päivitetty viimeksi:
- 10.07.2025
Kuvaus
* ETÜ-TA-R 19.0:
* Wabco EBS-E (electronic braking system)
* Emergency release device for spring-loaded cylinders
* Drum brakes
* 2 x 11 ton Gigant axles
* Air suspension
* Drawbar with 50 mm flange eye and height adjustment of 110 mm by offset plate
* Jost landing gear at front
* External folding supports at rear
* Plastic toolbox approx. 750 x 350 x 300 mm, right side
* Side underrun protection
* Plastic quarter mudguards
* 15-pin power connector
* LED lights
Kfedpfel Tp Aljx Abwoa
* Reinforcement package for drilling rig transport on the chassis
* 50 mm softwood floor, clamped design
* Device in front of bulkhead for subsequent installation of container locks
* Bolted bulkhead made of smooth sheet metal
* Split side walls of trapezoidal-profiled steel sheet, fold-down with folding stanchion in the middle
* Steel rear wall can be pushed in between the ramps - holder for storage when not in use on the inside in front of the bulkhead
* Rear stanchions bolted
* Perforated outer frame approx. 45 degrees angled with 2 ton lashing load every 480 mm
* Installation of 3 ton drop lashing rings every 600 mm possible
* Lashing package: in the corners at front and rear 1 x 10 ton UVV lashing each, on each side 2 x 8 ton UVV lashings retractable in the outer frame, various holes in head and end carrier for 1.2 ton lashing possibility
* One-piece mech. grid ramps with spring mechanism for one-man operation approx. 3,000 x 620 mm (can be compressed to 20 mm)
* Rear approach angle approx. 860 mm
* Chassis, drawbar, bulkhead, tailgate, folding supports and ramps hot-dip galvanized
* Axel,s air reservoir, flange eye and landing gear painted in a black tone
* Loading height unladen approx. 940 mm
* Loading height laden approx. 910 mm
* Wheelbase: 1,810 mm
* Tires: 235/75R17.5
* Painting of the board wall in RAL 9010 pure white
* Painting the side walls in another RAL color available at extra cost
* Vehicle has a day registration (without use)
* Errors and interim sale reserved,
* Immediately available from Egestorf on the A7
Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.
* Wabco EBS-E (electronic braking system)
* Emergency release device for spring-loaded cylinders
* Drum brakes
* 2 x 11 ton Gigant axles
* Air suspension
* Drawbar with 50 mm flange eye and height adjustment of 110 mm by offset plate
* Jost landing gear at front
* External folding supports at rear
* Plastic toolbox approx. 750 x 350 x 300 mm, right side
* Side underrun protection
* Plastic quarter mudguards
* 15-pin power connector
* LED lights
Kfedpfel Tp Aljx Abwoa
* Reinforcement package for drilling rig transport on the chassis
* 50 mm softwood floor, clamped design
* Device in front of bulkhead for subsequent installation of container locks
* Bolted bulkhead made of smooth sheet metal
* Split side walls of trapezoidal-profiled steel sheet, fold-down with folding stanchion in the middle
* Steel rear wall can be pushed in between the ramps - holder for storage when not in use on the inside in front of the bulkhead
* Rear stanchions bolted
* Perforated outer frame approx. 45 degrees angled with 2 ton lashing load every 480 mm
* Installation of 3 ton drop lashing rings every 600 mm possible
* Lashing package: in the corners at front and rear 1 x 10 ton UVV lashing each, on each side 2 x 8 ton UVV lashings retractable in the outer frame, various holes in head and end carrier for 1.2 ton lashing possibility
* One-piece mech. grid ramps with spring mechanism for one-man operation approx. 3,000 x 620 mm (can be compressed to 20 mm)
* Rear approach angle approx. 860 mm
* Chassis, drawbar, bulkhead, tailgate, folding supports and ramps hot-dip galvanized
* Axel,s air reservoir, flange eye and landing gear painted in a black tone
* Loading height unladen approx. 940 mm
* Loading height laden approx. 910 mm
* Wheelbase: 1,810 mm
* Tires: 235/75R17.5
* Painting of the board wall in RAL 9010 pure white
* Painting the side walls in another RAL color available at extra cost
* Vehicle has a day registration (without use)
* Errors and interim sale reserved,
* Immediately available from Egestorf on the A7
Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.
Toimittaja
Huomautus: Rekisteröidy ilmaiseksi tai kirjaudu sisään, saadaksesi kaikki tiedot.
Rekisteröity alkaen:: 2001
Lähetä pyyntö
Puhelin & Faksi
+49 40 33... ilmoitukset
Nämä ilmoitukset voivat myös kiinnostaa sinua.
Ilmoituksesi on poistettu onnistuneesti
Tapahtui virhe











































