Työalustallinen perävaunu

MÜLLER-MITTELTAL 21 to luftgef. Tandemtieflader mit Auffahrrampen

* ETÜ-TA-R 21.0:
* Wabco EBS-E (electronic braking system)
* RDÜ tire pressure monitoring system
* Emergency release device for spring brake cylinders
* Drum brakes
* 2 x 11 t Gigant axles
* Air suspension with lifting and lowering system
* Preparation in front of the front wall and rear slope for retrofitting container locks for transporting 20" containers
* Towing bar with 50 mm flanged towing eye and height-adjustable drawbar
* Jost landing gear at the front
* Externally mounted foldable supports at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm on the right side
* Side underrun protection
* Plastic quarter mudguards
* 15-pin electrical connector
* LED lights
* Design for 21 t GVW with reinforced frame and reinforced axles
* Reinforcement package for transporting drilling equipment on the chassis
* 50 mm softwood floor in clamped design
* Preparation in front of the front wall for retrofitting container locks
* Bolted front wall made of smooth sheet metal
* Split side walls made of steel sheet - trapezoidal profiled - foldable with center drop-in stake
* Steel rear wall insertable between the ramps – bracket for storage when not in use inside at the front wall
Fpsdpfol Tihxsx Aifjg
* Rear stakes bolted
* Perforated outer frame approx. 45 degrees bent with 2 t lashing capacity every 480 mm
* Option to install 3 t folding lashing rings every 600 mm
* Profifix lashing rail longitudinally in the center for securing loads up to LC 3,000 daN
* 1 x 10 t lashing ring each in the front and rear corners
* Lashing package with 2 x 8 t retractable lashing rings per side integrated in the outer frame, various bore holes in front and rear crossbeams for 1.2 t lashing options
* One-piece mechanical grating loading ramps with spring mechanism for single-person operation, approx. 3,000 x 620 mm (can be collapsed down to 20 mm)
* Rear drive-on slope approx. 860 mm chassis height
* Tow bar, front wall, tailgate, foldable supports, and loading ramps hot-dip galvanized
* Axles, springs, air tanks, and landing gear painted in black tone
* Loading height unladen approx. 940 mm
* Loaded approx. 910 mm
* Wheelbase: 1,810 mm
* Tires: 235/75R17.5
* Side panel painting in a RAL color of your choice (no special or metallic paint, can be changed up to about 6 weeks before completion)
* New vehicle with manufacturer's warranty
* Errors and prior sale excepted
* Available from week 29 / 2026

Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.