Matala lavetti perävaunuMÜLLER-MITTELTAL
3- Achs 30 to. Tieflader verz. hydr. Rampe NEU
Matala lavetti perävaunu
MÜLLER-MITTELTAL
3- Achs 30 to. Tieflader verz. hydr. Rampe NEU
kiinteä hinta ei sisällä ALV
42 500 €
(50 575 € bruttomassa)
Valmistusvuosi
2025
Kunto
Uusi
Sijainti
Egestorf 

Näytä kuvat
Näytä kartta
Perustiedot
Hinta ja sijainti
kiinteä hinta ei sisällä ALV
42 500 €
(50 575 € bruttomassa)
- Myyjän sijainti:
- Eichenstich 12, 21272 Egestorf, Saksa
Soita
Tekniset tiedot
- Kokonaispaino:
- 30 000 kg
- Maksimi kuormauspaino:
- 24 020 kg
- Akselikokoonpano:
- 3 akselia
- Kuormatilan pituus:
- 8 460 mm
- Lastitilan leveys:
- 2 520 mm
Tarjouksen tiedot
- Listaustunnus:
- A104-27-243
- Viitenumero:
- 5844
- Päivitetty viimeksi:
- 02.08.2025
Kuvaus
* T3 Profi 30.0:
* EBS braking system
* TPMS tire pressure monitoring system
* Emergency release device for spring brake cylinders
* Drum brakes
* 3 x 11 t Gigant axles
* Parabolic springs, mechanical axle equalization at the rear
* Side underrun protection
Kdjdjl Th Nnjpfx Adqou
* Swivel supports at the rear on the chassis frame
* Mechanically adjustable warning board kits at front and rear
* VA closed plastic mudguards at the front, straight galvanized steel fenders at the rear, each with spray protection
* Reflective contour marking tape on the sides and rear
* Tool box made of galvanized steel sheet – black powder-coated – approx. 650 x 300 x 600 mm
* Hinged lid (hot-dip galvanized) for the toolbox on the turntable platform
* Multi-voltage system
* LED tail lights
* Removable rotating beacon at the rear
* Tow bar with 50 mm towing eye and height adjustment via tension spring and turnbuckle
* 15-pin power plug
* Four stake pockets per side (stakes not included), with combined lashing possibility
* Load securing package comprising: 2 lashing eyes (6.4 t) at the front left & right on the main frame of the turntable platform, 6 pairs of UVV-compliant lashing rings, swiveling and lowerable, loadable in all directions and recessed in the outer frame – load capacity at corners 13.4 t, otherwise 10 t
* 6 pairs of mechanical folding extensions for 3 m total width (not on the rear slope)
* Widening planks stowed in the center of the loading platform
* Single-piece hot-dip galvanized hydraulic ramps (approx. 3,000 x 720 mm), mechanically adjustable laterally
* 4-section control block for retrofitting hydraulic lateral ramp displacement
* Loading area above turntable: approx. 1,960 x 2,520 mm
* Unloaded loading height approx. 1,070 mm
* Rear loading area: approx. 6,500 x 2,520 mm
* Unloaded loading height approx. 910 mm (incl. 860 mm approach slope)
* Chassis, turntable, tow bar, and ramps hot-dip galvanized
* Axles, springs, air tanks, etc. painted in black
* 235/75 R 17.5 twin tires
* Approx. 5,980 kg unladen weight
* Technically permissible gross weight of 30,000 kg
* New vehicle with manufacturer’s warranty
* Errors and prior sale excepted
* Available from calendar week 44 / 2025
Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.
* EBS braking system
* TPMS tire pressure monitoring system
* Emergency release device for spring brake cylinders
* Drum brakes
* 3 x 11 t Gigant axles
* Parabolic springs, mechanical axle equalization at the rear
* Side underrun protection
Kdjdjl Th Nnjpfx Adqou
* Swivel supports at the rear on the chassis frame
* Mechanically adjustable warning board kits at front and rear
* VA closed plastic mudguards at the front, straight galvanized steel fenders at the rear, each with spray protection
* Reflective contour marking tape on the sides and rear
* Tool box made of galvanized steel sheet – black powder-coated – approx. 650 x 300 x 600 mm
* Hinged lid (hot-dip galvanized) for the toolbox on the turntable platform
* Multi-voltage system
* LED tail lights
* Removable rotating beacon at the rear
* Tow bar with 50 mm towing eye and height adjustment via tension spring and turnbuckle
* 15-pin power plug
* Four stake pockets per side (stakes not included), with combined lashing possibility
* Load securing package comprising: 2 lashing eyes (6.4 t) at the front left & right on the main frame of the turntable platform, 6 pairs of UVV-compliant lashing rings, swiveling and lowerable, loadable in all directions and recessed in the outer frame – load capacity at corners 13.4 t, otherwise 10 t
* 6 pairs of mechanical folding extensions for 3 m total width (not on the rear slope)
* Widening planks stowed in the center of the loading platform
* Single-piece hot-dip galvanized hydraulic ramps (approx. 3,000 x 720 mm), mechanically adjustable laterally
* 4-section control block for retrofitting hydraulic lateral ramp displacement
* Loading area above turntable: approx. 1,960 x 2,520 mm
* Unloaded loading height approx. 1,070 mm
* Rear loading area: approx. 6,500 x 2,520 mm
* Unloaded loading height approx. 910 mm (incl. 860 mm approach slope)
* Chassis, turntable, tow bar, and ramps hot-dip galvanized
* Axles, springs, air tanks, etc. painted in black
* 235/75 R 17.5 twin tires
* Approx. 5,980 kg unladen weight
* Technically permissible gross weight of 30,000 kg
* New vehicle with manufacturer’s warranty
* Errors and prior sale excepted
* Available from calendar week 44 / 2025
Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.
Toimittaja
Huomautus: Rekisteröidy ilmaiseksi tai kirjaudu sisään, saadaksesi kaikki tiedot.
Rekisteröity alkaen:: 2001
Lähetä pyyntö
Puhelin & Faksi
+49 40 33... ilmoitukset
Nämä ilmoitukset voivat myös kiinnostaa sinua.
Ilmoituksesi on poistettu onnistuneesti
Tapahtui virhe