Matala lavetti perävaunuMÜLLER-MITTELTAL
11,9 to Tandemtiefl. 5,37 mtr mit Auffahrrampen
Matala lavetti perävaunu
MÜLLER-MITTELTAL
11,9 to Tandemtiefl. 5,37 mtr mit Auffahrrampen
kiinteä hinta ei sisällä ALV
24 750 €
(29 452 € bruttomassa)
Valmistusvuosi
2025
Kunto
Uusi
Sijainti
Egestorf 

Näytä kuvat
Näytä kartta
Perustiedot
Hinta ja sijainti
kiinteä hinta ei sisällä ALV
24 750 €
(29 452 € bruttomassa)
- Myyjän sijainti:
- Eichenstich 12, 21272 Egestorf, Saksa

Soita
Tekniset tiedot
- Maksimi kuormauspaino:
- 8 800 kg
- Kokonaispaino:
- 11 900 kg
- Akselikokoonpano:
- 2 akselia
- Kuormatilan pituus:
- 5 370 mm
- Lastitilan leveys:
- 2 470 mm
- Kuormatilan korkeus:
- 400 mm
Tarjouksen tiedot
- Listaustunnus:
- A104-27-234
- Viitenumero:
- 6056
- Päivitetty viimeksi:
- 07.01.2026
Kuvaus
* ETÜ-TA-R 11.9:
----Brakes:
* EBS braking system
* Emergency release device for spring-loaded cylinders
* Drum brakes, 2 x 5.5 t
----Axles:
* Gigant axles
----Suspension:
* Parabolic springs with compensating unit
----Drawbar / Flange Towing Eye:
* Height-adjustable drawbar, adjustable by 300 mm
* 40 mm flange towing eye
----General Attachments:
* Jost landing gear at front
* External foldable support legs at rear
* Plastic toolbox on the front right outside, mounted on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Electrics / Lighting:
* TPMS (tire pressure monitoring system)
* LED lighting
----Loading Platform:
* Loading area 5.37 m
* 50 mm softwood floor
* Bolt-on bulkhead made of flat sheet metal
* Side walls made of trapetzoidal-profiled steel, foldable with drop-side spring assist
* Rear wall made of steel, can be slid between the ramp holders for storage in front of the bulkhead when not in use
* Rear stakes bolted
----Load Securing:
* Outer frame with perforations, bent approx. 45 degrees, lashing capacity 2 t every 480 mm
* Installation of 3 t folding lashing rings every 600 mm possible
* In each front and rear corner, one lashing ring, 6.3 t each
* Various holes in the bulkhead and rear crossmember for 1.2 t lashing options
----Ramps:
* One-piece mechanical grid ramps with spring system for single-person operation, approx. 2,750 x 600 mm (can be pushed together to 20 mm)
* Rear approach angle approx. 860 mm from chassis
----Tyres:
Dcjdpfxjl Th Nco Ahxoc
* Tyres 235/75 R 17.5
----Wheelbase:
* Wheelbase: 990 mm
----Paintwork:
* Drawbar, bulkhead, tailgate, foldable supports, and drive-on ramps hot-dip galvanized
* Axles, springs, air tanks, and 40 mm flange towing eye painted in black shade
* Side wall paintwork in RAL2011 deep orange
* Custom color paintwork for side panels available for an additional charge
----Information:
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery time:
* Available immediately from Egestorf
Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.
----Brakes:
* EBS braking system
* Emergency release device for spring-loaded cylinders
* Drum brakes, 2 x 5.5 t
----Axles:
* Gigant axles
----Suspension:
* Parabolic springs with compensating unit
----Drawbar / Flange Towing Eye:
* Height-adjustable drawbar, adjustable by 300 mm
* 40 mm flange towing eye
----General Attachments:
* Jost landing gear at front
* External foldable support legs at rear
* Plastic toolbox on the front right outside, mounted on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Electrics / Lighting:
* TPMS (tire pressure monitoring system)
* LED lighting
----Loading Platform:
* Loading area 5.37 m
* 50 mm softwood floor
* Bolt-on bulkhead made of flat sheet metal
* Side walls made of trapetzoidal-profiled steel, foldable with drop-side spring assist
* Rear wall made of steel, can be slid between the ramp holders for storage in front of the bulkhead when not in use
* Rear stakes bolted
----Load Securing:
* Outer frame with perforations, bent approx. 45 degrees, lashing capacity 2 t every 480 mm
* Installation of 3 t folding lashing rings every 600 mm possible
* In each front and rear corner, one lashing ring, 6.3 t each
* Various holes in the bulkhead and rear crossmember for 1.2 t lashing options
----Ramps:
* One-piece mechanical grid ramps with spring system for single-person operation, approx. 2,750 x 600 mm (can be pushed together to 20 mm)
* Rear approach angle approx. 860 mm from chassis
----Tyres:
Dcjdpfxjl Th Nco Ahxoc
* Tyres 235/75 R 17.5
----Wheelbase:
* Wheelbase: 990 mm
----Paintwork:
* Drawbar, bulkhead, tailgate, foldable supports, and drive-on ramps hot-dip galvanized
* Axles, springs, air tanks, and 40 mm flange towing eye painted in black shade
* Side wall paintwork in RAL2011 deep orange
* Custom color paintwork for side panels available for an additional charge
----Information:
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery time:
* Available immediately from Egestorf
Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.
Toimittaja
Huomautus: Rekisteröidy ilmaiseksi tai kirjaudu sisään, saadaksesi kaikki tiedot.
Rekisteröity alkaen:: 2001
Lähetä pyyntö
Puhelin & Faksi
+49 40 33... ilmoitukset
Nämä ilmoitukset voivat myös kiinnostaa sinua.
Ilmoituksesi on poistettu onnistuneesti
Tapahtui virhe








































