Työalustallinen perävaunuMÜLLER-MITTELTAL
19 to. Tandemtieflader mit Auffahrrampe NEU
Työalustallinen perävaunu
MÜLLER-MITTELTAL
19 to. Tandemtieflader mit Auffahrrampe NEU
Kiinteä hinta alv 0% (veroton)
29 950 €
(35 640 € bruttomassa)
Valmistusvuosi
2026
Kunto
Uusi
Sijainti
Egestorf 

Perustiedot
Hinta ja sijainti
Kiinteä hinta alv 0% (veroton)
29 950 €
(35 640 € bruttomassa)
- Sijainti:
- Eichenstich 12, 21272 Egestorf, Deutschland

Soita
Tekniset tiedot
- Maksimi kuormauspaino:
- 14 660 kg
- Kokonaispaino:
- 18 000 kg
- Akselikokoonpano:
- 2 akselia
- Kuormatilan pituus:
- 6 270 mm
- Lastitilan leveys:
- 2 470 mm
- Kuormatilan korkeus:
- 400 mm
Tarjouksen tiedot
- Ilmoituksen tunnus:
- A104-27-186
- Viitenumero:
- 58341
- Päivitys:
- viimeksi 27.06.2026
Kuvaus
ETÜ-TA-R 19.0:
----Brakes:
* Wabco EBS braking system
* Emergency release system for spring brake cylinders
* Drum brakes
----Axles:
2 x 10-ton BPW Eco axles
----Suspension:
* Parabolic springs – 110 mm wide – with tandem equalizer
----Drawbar / Flange coupling:
Drawbar with 50 mm flange coupling and height-adjustable drawbar
----Electrical system / Lighting:
* 15-pole power connector
* LED rear lights
* TPMS (Tire Pressure Monitoring System)
----General components:
* Jost support legs at the front
* Outboard folding supports at the rear
* Side impact protection
* Plastic quarter fenders
----Low-bed platform:
* 50 mm softwood flooring
* Provision in front of the front wall for the subsequent installation of container locking devices
* Bolted smooth-plate front wall
* Steel side walls – trapezoidally profiled – foldable with side gate spring lifters
* Steel rear wall, retractable between the ramps – bracket for storage when not in use, located inside in front of the front wall
* Rear cross members, bolted
----Load securing:
* Perforated outer frame, bent at approximately 45 degrees, with a lashing capacity of 2 tons every 480 mm
* Installation of 3-ton lashing eyes possible every 600 mm
* One 10-ton lashing point in each front and rear corner; various holes in the front and end cross members for 1.2-ton lashing
* Profifix lashing rail in the longitudinal axis, centered, for lashing capacity up to LC 3000 daN
Nsdpfx Alol Th Hws Tjlc
----Ramps:
* One-piece mechanical grating ramps with spring mechanism for single-person operation, approximately 2,750 x 620 mm (can be retracted to 20 mm)
* Approach angle at the rear, approximately 860 mm
----Painting:
* Chassis, drawbar, front wall, rear wall, ramps, and folding supports hot-dip galvanized
* Painting of the side gates in RAL 9010 pure white
* Painting of the side walls in an RAL color is possible for an additional charge
* Axles, springs, air tanks, flange coupling, and support legs painted in a black shade
----Information:
* New vehicle with full manufacturer's warranty
* Errors and prior sale are subject to change
----Delivery time:
* Available for immediate delivery from Egestorf near the A7 motorway
Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.
----Brakes:
* Wabco EBS braking system
* Emergency release system for spring brake cylinders
* Drum brakes
----Axles:
2 x 10-ton BPW Eco axles
----Suspension:
* Parabolic springs – 110 mm wide – with tandem equalizer
----Drawbar / Flange coupling:
Drawbar with 50 mm flange coupling and height-adjustable drawbar
----Electrical system / Lighting:
* 15-pole power connector
* LED rear lights
* TPMS (Tire Pressure Monitoring System)
----General components:
* Jost support legs at the front
* Outboard folding supports at the rear
* Side impact protection
* Plastic quarter fenders
----Low-bed platform:
* 50 mm softwood flooring
* Provision in front of the front wall for the subsequent installation of container locking devices
* Bolted smooth-plate front wall
* Steel side walls – trapezoidally profiled – foldable with side gate spring lifters
* Steel rear wall, retractable between the ramps – bracket for storage when not in use, located inside in front of the front wall
* Rear cross members, bolted
----Load securing:
* Perforated outer frame, bent at approximately 45 degrees, with a lashing capacity of 2 tons every 480 mm
* Installation of 3-ton lashing eyes possible every 600 mm
* One 10-ton lashing point in each front and rear corner; various holes in the front and end cross members for 1.2-ton lashing
* Profifix lashing rail in the longitudinal axis, centered, for lashing capacity up to LC 3000 daN
Nsdpfx Alol Th Hws Tjlc
----Ramps:
* One-piece mechanical grating ramps with spring mechanism for single-person operation, approximately 2,750 x 620 mm (can be retracted to 20 mm)
* Approach angle at the rear, approximately 860 mm
----Painting:
* Chassis, drawbar, front wall, rear wall, ramps, and folding supports hot-dip galvanized
* Painting of the side gates in RAL 9010 pure white
* Painting of the side walls in an RAL color is possible for an additional charge
* Axles, springs, air tanks, flange coupling, and support legs painted in a black shade
----Information:
* New vehicle with full manufacturer's warranty
* Errors and prior sale are subject to change
----Delivery time:
* Available for immediate delivery from Egestorf near the A7 motorway
Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.
Toimittaja
Huomautus: Rekisteröidy ilmaiseksi tai kirjaudu sisään, saadaksesi kaikki tiedot.
Rekisteröitynyt vuodesta: 2001
169 Verkkoilmoitukset
Lähetä kysely
Puhelin & Faksi
+49 40 33... ilmoitukset
Ilmoituksesi on poistettu onnistuneesti
Tapahtui virhe














































