AvoperävaunuMÜLLER-MITTELTAL
        Tandemtieflader, Lufrfederung, Gitterrostrampen    
 Avoperävaunu
MÜLLER-MITTELTAL
        Tandemtieflader, Lufrfederung, Gitterrostrampen    
                                                     kiinteä hinta ei sisällä ALV                                            
                                            29 900 €                                    
                        (35 581 € bruttomassa)                    
                Valmistusvuosi            
                2025            
            Kunto        
            Uusi                    
            Sijainti        
                                                Egestorf                                            

 Näytä kuvat            
 Näytä kartta            
Perustiedot
Hinta ja sijainti
                             kiinteä hinta ei sisällä ALV                    
                            29 900 €                    
                (35 581 € bruttomassa)            
- Myyjän sijainti:
-     Eichenstich 12, 21272 Egestorf, Saksa             
 Soita            
Tekniset tiedot
- Maksimi kuormauspaino:
- 10 500 kg
- Kokonaispaino:
- 14 400 kg
- Akselikokoonpano:
- 2 akselia
- Kuormatilan pituus:
- 7 000 mm
- Lastitilan leveys:
- 2 470 mm
- Kuormatilan korkeus:
- 400 mm
Tarjouksen tiedot
- Listaustunnus:
- A104-27-108
- Viitenumero:
- 6285a
- Päivitetty viimeksi:
- 08.07.2025
Kuvaus
        * EBS (electronic braking system)
* Emergency release device for spring brake cylinders
* Drum brakes
* 2 x 7 t Gigant axles
* Air suspension with lift and lowering system
* Drawbar height adjustable by approx. 300 mm
* Drawbar extension by 250 mm to 2,250 mm
* Tire pressure monitoring with display capability in the truck via EBS signal – no truck-side installation required
* 15-pin power connector
* LED lighting
Rcsdel Th Dfepfx Abajh
* Front landing gear
* Rear folding support legs, externally mounted
* Plastic toolbox approx. 858 x 500 x 500 mm, front right outside on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
* 50 mm softwood floor
* Provisions in front of the bulkhead and at the rear for retrofitting 20" container locks
* Bolted bulkhead made of smooth sheet metal
* Side walls made of trapezoid-profiled steel sheet, foldable, center-divided (1x)
* Rear wall made of steel, insertable between the ramps, storage bracket for non-use inside in front of the bulkhead
* Rear stanchions bolted
* Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm
* Installation of 3 t folding lashing shackles possible every 600 mm – 4 lashing rings installed per side
* One 6.3 t lashing ring in each front and rear corner
* Various holes for 1.2 t lashing options in the bulkhead and end crossmember
* One-piece mechanical grating ramps with spring mechanism for one-man operation, approx. 2,750 x 600 mm (can be collapsed to 20 mm)
* Rear approach slope approx. 860 mm
* Chassis, drawbar, bulkhead, tailgate, folding support legs, and ramps hot-dip galvanized
* Axles, springs, air tanks, flange eye, and landing gear painted black
* Side wall color freely selectable up to approx. 2 weeks before production date; no metallic or special colors allowed
* --reinforced and certified body according to EN 12642 XL including load securing certificate--
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Immediately available in Egestorf
Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.
* Emergency release device for spring brake cylinders
* Drum brakes
* 2 x 7 t Gigant axles
* Air suspension with lift and lowering system
* Drawbar height adjustable by approx. 300 mm
* Drawbar extension by 250 mm to 2,250 mm
* Tire pressure monitoring with display capability in the truck via EBS signal – no truck-side installation required
* 15-pin power connector
* LED lighting
Rcsdel Th Dfepfx Abajh
* Front landing gear
* Rear folding support legs, externally mounted
* Plastic toolbox approx. 858 x 500 x 500 mm, front right outside on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
* 50 mm softwood floor
* Provisions in front of the bulkhead and at the rear for retrofitting 20" container locks
* Bolted bulkhead made of smooth sheet metal
* Side walls made of trapezoid-profiled steel sheet, foldable, center-divided (1x)
* Rear wall made of steel, insertable between the ramps, storage bracket for non-use inside in front of the bulkhead
* Rear stanchions bolted
* Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm
* Installation of 3 t folding lashing shackles possible every 600 mm – 4 lashing rings installed per side
* One 6.3 t lashing ring in each front and rear corner
* Various holes for 1.2 t lashing options in the bulkhead and end crossmember
* One-piece mechanical grating ramps with spring mechanism for one-man operation, approx. 2,750 x 600 mm (can be collapsed to 20 mm)
* Rear approach slope approx. 860 mm
* Chassis, drawbar, bulkhead, tailgate, folding support legs, and ramps hot-dip galvanized
* Axles, springs, air tanks, flange eye, and landing gear painted black
* Side wall color freely selectable up to approx. 2 weeks before production date; no metallic or special colors allowed
* --reinforced and certified body according to EN 12642 XL including load securing certificate--
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Immediately available in Egestorf
Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.
Toimittaja
            Huomautus:        Rekisteröidy ilmaiseksi tai kirjaudu sisään, saadaksesi kaikki tiedot.    
Rekisteröity alkaen:: 2001
Lähetä pyyntö
Puhelin & Faksi
                            +49 40 33... ilmoitukset                
 Nämä ilmoitukset voivat myös kiinnostaa sinua.
            Ilmoituksesi on poistettu onnistuneesti            
            Tapahtui virhe            

















































