Matala lavetti perävaunuMÜLLER-MITTELTAL
T3 Profi 30,0 Neu, Baggerstielablage, hydr. Ramp
Matala lavetti perävaunu
MÜLLER-MITTELTAL
T3 Profi 30,0 Neu, Baggerstielablage, hydr. Ramp
kiinteä hinta ei sisällä ALV
43 500 €
(51 765 € bruttomassa)
Valmistusvuosi
2026
Kunto
Uusi
Sijainti
Egestorf 

Näytä kuvat
Näytä kartta
Perustiedot
Hinta ja sijainti
kiinteä hinta ei sisällä ALV
43 500 €
(51 765 € bruttomassa)
- Myyjän sijainti:
- Eichenstich 12, 21272 Egestorf, Saksa

Soita
Tekniset tiedot
- Maksimi kuormauspaino:
- 23 830 kg
- Kokonaispaino:
- 30 000 kg
- Akselikokoonpano:
- 3 akselia
- Kuormatilan pituus:
- 8 460 mm
- Lastitilan leveys:
- 2 520 mm
Tarjouksen tiedot
- Listaustunnus:
- A104-26-976
- Viitenumero:
- 60982
- Päivitetty viimeksi:
- 18.12.2025
Kuvaus
* T3 Profile 30.0:
* EBS braking system
* RDÜ tire pressure monitoring system
* Emergency release device for spring brake cylinders
* Drum brakes
* 3 x 11 t BPW Eco axles
* Parabolic leaf springs
* Mechanical rear axle equalizer
* Side underrun protection
* Swing-down supports at the rear of the chassis frame
* Mechanically adjustable warning sign packages at front and rear
* Front axle closed plastic mudguards and rear axle straight galvanized steel skirts, each with spray protection
* Reflective contour tape on the sides and rear
* Hinged lid (hot-dip galvanized) for the toolbox in the turntable platform
* Multi-voltage system
* LED tail lights
* Removable rotating beacon at the rear
* Drawbar with 40 mm towing eye and height adjustment via draw spring & turnbuckle
* 15-pin electrical connector
* Four stake pockets on each side (stakes not included), with integrated lashing option
* Load securing package consisting of: 2 lashing points (6.4 t) front left & right on the main frame of the turntable platform, 5 pairs of UVV-compliant lashing rings, swiveling and lowerable, loadable in all directions and recessed into the outer frame – corner load capacity 13.4 t, otherwise 10 t
* 6 pairs of mechanical folding extension arms for a total width of 3m (not in the rear slope)
* Widening planks stored in the center of the loading area
* Excavator arm rest above rear axle to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator arm rest)
* One-piece hydraulic ramps (approx. 3,000 x 720 mm)
* Mechanically adjustable lateral ramp displacement
* Loading area above the slewing ring: approx. 1,960 x 2,520 mm
* Unladen loading height approx. 1,070 mm
* Rear loading area: approx. 6,500 x 2,520 mm
* Unladen loading height approx. 910 mm (incl. 860 mm rear ramp angle)
Knjdpfol Thxaox Abwsf
* Chassis, turntable, drawbar and ramps hot-dip galvanized
* Axles, springs, air tank etc. painted in a shade of black
* 235/75 R 17.5 twin tires
* 5,900 kg unladen weight
* --Total technical gross weight permissible: 30,000 kg--
* Vehicle is hot-dip galvanized
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Available from CW 09/2026
Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.
* EBS braking system
* RDÜ tire pressure monitoring system
* Emergency release device for spring brake cylinders
* Drum brakes
* 3 x 11 t BPW Eco axles
* Parabolic leaf springs
* Mechanical rear axle equalizer
* Side underrun protection
* Swing-down supports at the rear of the chassis frame
* Mechanically adjustable warning sign packages at front and rear
* Front axle closed plastic mudguards and rear axle straight galvanized steel skirts, each with spray protection
* Reflective contour tape on the sides and rear
* Hinged lid (hot-dip galvanized) for the toolbox in the turntable platform
* Multi-voltage system
* LED tail lights
* Removable rotating beacon at the rear
* Drawbar with 40 mm towing eye and height adjustment via draw spring & turnbuckle
* 15-pin electrical connector
* Four stake pockets on each side (stakes not included), with integrated lashing option
* Load securing package consisting of: 2 lashing points (6.4 t) front left & right on the main frame of the turntable platform, 5 pairs of UVV-compliant lashing rings, swiveling and lowerable, loadable in all directions and recessed into the outer frame – corner load capacity 13.4 t, otherwise 10 t
* 6 pairs of mechanical folding extension arms for a total width of 3m (not in the rear slope)
* Widening planks stored in the center of the loading area
* Excavator arm rest above rear axle to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator arm rest)
* One-piece hydraulic ramps (approx. 3,000 x 720 mm)
* Mechanically adjustable lateral ramp displacement
* Loading area above the slewing ring: approx. 1,960 x 2,520 mm
* Unladen loading height approx. 1,070 mm
* Rear loading area: approx. 6,500 x 2,520 mm
* Unladen loading height approx. 910 mm (incl. 860 mm rear ramp angle)
Knjdpfol Thxaox Abwsf
* Chassis, turntable, drawbar and ramps hot-dip galvanized
* Axles, springs, air tank etc. painted in a shade of black
* 235/75 R 17.5 twin tires
* 5,900 kg unladen weight
* --Total technical gross weight permissible: 30,000 kg--
* Vehicle is hot-dip galvanized
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Available from CW 09/2026
Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.
Toimittaja
Huomautus: Rekisteröidy ilmaiseksi tai kirjaudu sisään, saadaksesi kaikki tiedot.
Rekisteröity alkaen:: 2001
Lähetä pyyntö
Puhelin & Faksi
+49 40 33... ilmoitukset
Nämä ilmoitukset voivat myös kiinnostaa sinua.
Pieni ilmoitus
Egestorf
1 343 km
Matala lavetti perävaunu
MÜLLER-MITTELTALT3 Profi 30,0 Neu, Baggerstielablage, hydr. Ramp
MÜLLER-MITTELTALT3 Profi 30,0 Neu, Baggerstielablage, hydr. Ramp
Pieni ilmoitus
Göttingen
1 499 km
Ohita kuormaaja
ReischAbsetzanhänger REA-24Z
ReischAbsetzanhänger REA-24Z
Pieni ilmoitus
Egestorf
1 342 km
Työalustallinen perävaunu
MÜLLER-MITTELTALT3 Profi 30,0 Neu, Baggerstielablage, hydr. Ramp
MÜLLER-MITTELTALT3 Profi 30,0 Neu, Baggerstielablage, hydr. Ramp
Pieni ilmoitus
Kehl
1 858 km
Rullavavaunu
JUNG HOMBURGAbsetz Container Jung TMA 18L Adonis*ri
JUNG HOMBURGAbsetz Container Jung TMA 18L Adonis*ri
Pieni ilmoitus
Diespeck
1 658 km
Roskalavakonttiperävaunu
JungT2 MA 18-L-Adonis Absetzcontainer Anhäng
JungT2 MA 18-L-Adonis Absetzcontainer Anhäng
Pieni ilmoitus
Jestetten
1 920 km
Vaihdettavalla alustalla varustettu perävaunu
Müller-MitteltalRA-T 18 Muldenanhänger / Swiss-Vehicle
Müller-MitteltalRA-T 18 Muldenanhänger / Swiss-Vehicle
Pieni ilmoitus
Wildeshausen
1 437 km
Rullavavaunu
MÜLLER-MITTELTAL2-achs Muldenanhänger / TM2 18,0 L
MÜLLER-MITTELTAL2-achs Muldenanhänger / TM2 18,0 L
Ilmoituksesi on poistettu onnistuneesti
Tapahtui virhe






































































































































