Matala lavetti perävaunuMÜLLER-MITTELTAL
11,9 to Tandemkippanh. mit Agra vorbereitung
Matala lavetti perävaunu
MÜLLER-MITTELTAL
11,9 to Tandemkippanh. mit Agra vorbereitung
Kiinteä hinta alv 0% (veroton)
27 900 €
(33 201 € bruttomassa)
Valmistusvuosi
2026
Kunto
Uusi
Sijainti
Egestorf 

Perustiedot
Hinta ja sijainti
Kiinteä hinta alv 0% (veroton)
27 900 €
(33 201 € bruttomassa)
- Myyjän sijainti:
- Eichenstich 12, 21272 Egestorf, Saksa

Soita
Tekniset tiedot
- Maksimi kuormauspaino:
- 8 650 kg
- Kokonaispaino:
- 11 900 kg
- Akselikokoonpano:
- 2 akselia
- Kuormatilan pituus:
- 5 000 mm
- Lastitilan leveys:
- 2 420 mm
- Kuormatilan korkeus:
- 500 mm
Tarjouksen tiedot
- Ilmoituksen tunnus:
- A104-26-970
- Viitenumero:
- 61561
- Päivitys:
- viimeksi 24.07.2026
Kuvaus
* KA-TA-R 11.9 Masterline
----Brakes:
* Wabco EBS
* Emergency release system for spring brake cylinders
* Drum brakes
----Axle:
* 2 x 5.5 tons BPW axles
----Suspension:
* Parabolic springs with tandem equalizer
----Drawbar / Flange coupling:
Cjdpfx Ajl Thw Ijaveha
* Height-adjustable drawbar by 300 mm with 40 mm flange coupling
----Electrical system / Lighting:
* TPMS tire pressure monitoring system
* Multivoltage
* 15-pole power connector
* 12 V 13-pole auxiliary cable
* Extended connection cables for forestry and agricultural towing vehicles
* LED tail lights
----General components:
* Mechanical support crank at the front
* 2 mechanical folding supports at the rear
* Plastic tool box on the right side
* 2-step footstep on the left side, facing forward
* Underrun protection, bolted
* Plastic quarter fenders
----Tipping body:
* Net hooks on the side and at the rear in the bearings of the central locking system, as well as 2 pieces on the front wall
* Steel pallet-sided 3-way tipping body (continuous side walls - without center rails - foldable with side panel spring lifters, foldable tailgate as well as pivoting via manual central locking)
* 4 mm steel sheet floor
* Mounting rail at the rear for loading ramps
----Load securing:
* 1 x 5 tons lashing point in each corner
* as well as 4 x 3 tons lashing points on each side, embedded in the outer frame
----Ramps:
* 1 pair of aluminum loading ramps, approx. 3,310 x 400 mm (load capacity 8 tons / pair) suitable for rubber-tired and tracked vehicles
* Lockable storage compartment at the rear under the loading area, integrated into the chassis
----Tires:
* Tire size 385/55 R 19.5
----Paint finish:
* Chassis, drawbar, tipping body, front wall, folding supports and rear rails hot-dip galvanized
* Axles, springs, air tank, flange coupling and support crank painted in a black tone
* Painting of the side panels in RAL - 9010 pure white
----Information:
* Body reinforced with load securing certificate according to EN 12642 XL
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery time:
* Available for immediate delivery from Egestorf
Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.
----Brakes:
* Wabco EBS
* Emergency release system for spring brake cylinders
* Drum brakes
----Axle:
* 2 x 5.5 tons BPW axles
----Suspension:
* Parabolic springs with tandem equalizer
----Drawbar / Flange coupling:
Cjdpfx Ajl Thw Ijaveha
* Height-adjustable drawbar by 300 mm with 40 mm flange coupling
----Electrical system / Lighting:
* TPMS tire pressure monitoring system
* Multivoltage
* 15-pole power connector
* 12 V 13-pole auxiliary cable
* Extended connection cables for forestry and agricultural towing vehicles
* LED tail lights
----General components:
* Mechanical support crank at the front
* 2 mechanical folding supports at the rear
* Plastic tool box on the right side
* 2-step footstep on the left side, facing forward
* Underrun protection, bolted
* Plastic quarter fenders
----Tipping body:
* Net hooks on the side and at the rear in the bearings of the central locking system, as well as 2 pieces on the front wall
* Steel pallet-sided 3-way tipping body (continuous side walls - without center rails - foldable with side panel spring lifters, foldable tailgate as well as pivoting via manual central locking)
* 4 mm steel sheet floor
* Mounting rail at the rear for loading ramps
----Load securing:
* 1 x 5 tons lashing point in each corner
* as well as 4 x 3 tons lashing points on each side, embedded in the outer frame
----Ramps:
* 1 pair of aluminum loading ramps, approx. 3,310 x 400 mm (load capacity 8 tons / pair) suitable for rubber-tired and tracked vehicles
* Lockable storage compartment at the rear under the loading area, integrated into the chassis
----Tires:
* Tire size 385/55 R 19.5
----Paint finish:
* Chassis, drawbar, tipping body, front wall, folding supports and rear rails hot-dip galvanized
* Axles, springs, air tank, flange coupling and support crank painted in a black tone
* Painting of the side panels in RAL - 9010 pure white
----Information:
* Body reinforced with load securing certificate according to EN 12642 XL
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery time:
* Available for immediate delivery from Egestorf
Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.
Toimittaja
Huomautus: Rekisteröidy ilmaiseksi tai kirjaudu sisään, saadaksesi kaikki tiedot.
Rekisteröitynyt vuodesta: 2001
171 Verkkoilmoitukset
Lähetä kysely
Puhelin & Faksi
+49 40 33... ilmoitukset
Nämä ilmoitukset voivat myös kiinnostaa sinua.
Ilmoituksesi on poistettu onnistuneesti
Tapahtui virhe























































