RullavavaunuMÜLLER-MITTELTAL
18t. Kombi, Abroller Absetzer Tieflader, Parabel
Rullavavaunu
MÜLLER-MITTELTAL
18t. Kombi, Abroller Absetzer Tieflader, Parabel
kiinteä hinta ei sisällä ALV
40 900 €
(48 671 € bruttomassa)
Valmistusvuosi
2025
Kunto
Uusi
Sijainti
Egestorf 

Näytä kuvat
Näytä kartta
Perustiedot
Hinta ja sijainti
kiinteä hinta ei sisällä ALV
40 900 €
(48 671 € bruttomassa)
- Myyjän sijainti:
- Eichenstich 12, 21272 Egestorf, Saksa

Soita
Tekniset tiedot
- Maksimi kuormauspaino:
- 13 500 kg
- Kokonaispaino:
- 18 000 kg
- Akselikokoonpano:
- 2 akselia
- Kuormatilan pituus:
- 7 000 mm
- Lastitilan leveys:
- 2 480 mm
Tarjouksen tiedot
- Listaustunnus:
- A104-26-946
- Viitenumero:
- 5739
- Päivitetty viimeksi:
- 12.08.2025
Kuvaus
* TRA-Kombi 18.0:
* Load securing package
* Wabco
* RDÜ tire pressure monitoring system
* EBS-E (electronic braking system)
* Emergency release device for spring brake cylinders
* 2 x 12 t Gigant axles
* Parabolic springs
* Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and height adjustment system
* Toolbox made of powder-coated sheet steel, right side mounted
* Reflective contour tape, side and rear
* Side underrun protection
* Plastic quarter mudguards with spray protection
* Storage box for container nets made of galvanized sheet metal approx. 960 x 300 x 400/450 mm, right side mounted
* Rear plastic anti-collision buffer
* LED tail lights
* 15-pin electrical connector
* Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) for guiding container rollers
* Steel floor with roller recesses in the bogie area
* When transporting roll-off containers, container lengths of 5,500 – 7,000 mm possible
* Pneumatic 4-point clamping lock as well as mechanical plug-in stops at the front of the travel path, load securing certificate according to DIN 30722-1
* Transport of up to 2 skip containers with a maximum volume of 10 m³ each possible
* With 8 repositionable skip stops for lateral centering, the front 4 are plug-in with pivotable end stop
* 3 pairs of 10 t UVV lashing rings on the side for attaching tensioning devices for positive and non-positive securing of skips, 4 cloverleaf lashing brackets on each side, 1 pair of 13.4 t UVV lashing rings at the front; load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700
* Weld seam as anti-slip coating in the inclined ramp area
* Mechanical rear drop supports
* 1 pair of aluminum access ramps (10.6 t/pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment at the rear)
* 235/75 R 17.5 twin tires
Nodjl Thwcopfx Af Aslh
* Unladen weight: 4,360 kg
* Technically permissible gross weight: 20,000 kg
* New vehicle with manufacturer warranty
* Errors and prior sale excepted
* Available from CW 48 / 2025
Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.
* Load securing package
* Wabco
* RDÜ tire pressure monitoring system
* EBS-E (electronic braking system)
* Emergency release device for spring brake cylinders
* 2 x 12 t Gigant axles
* Parabolic springs
* Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and height adjustment system
* Toolbox made of powder-coated sheet steel, right side mounted
* Reflective contour tape, side and rear
* Side underrun protection
* Plastic quarter mudguards with spray protection
* Storage box for container nets made of galvanized sheet metal approx. 960 x 300 x 400/450 mm, right side mounted
* Rear plastic anti-collision buffer
* LED tail lights
* 15-pin electrical connector
* Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) for guiding container rollers
* Steel floor with roller recesses in the bogie area
* When transporting roll-off containers, container lengths of 5,500 – 7,000 mm possible
* Pneumatic 4-point clamping lock as well as mechanical plug-in stops at the front of the travel path, load securing certificate according to DIN 30722-1
* Transport of up to 2 skip containers with a maximum volume of 10 m³ each possible
* With 8 repositionable skip stops for lateral centering, the front 4 are plug-in with pivotable end stop
* 3 pairs of 10 t UVV lashing rings on the side for attaching tensioning devices for positive and non-positive securing of skips, 4 cloverleaf lashing brackets on each side, 1 pair of 13.4 t UVV lashing rings at the front; load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700
* Weld seam as anti-slip coating in the inclined ramp area
* Mechanical rear drop supports
* 1 pair of aluminum access ramps (10.6 t/pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment at the rear)
* 235/75 R 17.5 twin tires
Nodjl Thwcopfx Af Aslh
* Unladen weight: 4,360 kg
* Technically permissible gross weight: 20,000 kg
* New vehicle with manufacturer warranty
* Errors and prior sale excepted
* Available from CW 48 / 2025
Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.
Toimittaja
Huomautus: Rekisteröidy ilmaiseksi tai kirjaudu sisään, saadaksesi kaikki tiedot.
Rekisteröity alkaen:: 2001
Lähetä pyyntö
Puhelin & Faksi
+49 40 33... ilmoitukset
Nämä ilmoitukset voivat myös kiinnostaa sinua.
Ilmoituksesi on poistettu onnistuneesti
Tapahtui virhe














































