Porauslautta

mobiles Saugfass Saugaufbau Kipper Vacuumtank

Mobile Suction System 0.5 - 14 m³ Suction Tank / Vacuum System

- Mounted on a subframe according to DIN 30722
- Steel tank with a capacity of 500 - 14,000 liters
- Container and subframe hot-dip galvanized
- Continuous angle frame, fully welded along the entire length
- Designed for max. 0.5 bar pressure
- Designed for max. 1.0 bar vacuum
- 2 liquid separators and
Cgodpfx Ahel I I Rpjxon
- Safety system: manhole cover, control valve with
- Safety manhole with overflow valve
- Mechanical level indicator with scale
- 2 internal baffle plates reinforced with T-section rings
- Suction connection at rear bottom: 4" x Ø 108 Perrot coupling
- Suction connection left: 4" x Ø 108 Perrot coupling
- Storage boxes left and right with lids for hoses and tools, lockable
- The engine unit is installed at the front, between container and hooklift bar

Compressor:
Depending on version and requirement, e.g. MECII 9000 ballast system
- Vacuum compressor with injection air cooling
- Heat-resistant vanes
- Crash protection system
- Delivery rate max. 9,000 liters/minute
- Max. pressure 0.5 bar
- Max. vacuum -0.95 bar
- Continuous operation permitted at -0.6 bar
- Automatic lubrication
- Lubrication oil reservoir 2.5 liters
- Level indicator for lubrication

Engine:
- Briggs & Stratton Vanguard
- 31 HP / 23.1 kW
- Two-cylinder V-engine, 4-stroke
- OHV valve control
- Electric start
- 12 volt battery
- V-belt drive incl. guard
- Completely mounted on a console
- Enclosed as theft protection

High-Pressure Cleaner:
- Working pressure: 30-150 bar
- Cleaning performance: 13 l/min
- With original Honda engine
- Automatic high-pressure hose reel
- With 15m HP hose DN08
- Cleaning lance
- Dirt blaster
- 2 plastic tanks, each with 500 liter capacity

For technical data and further information, please contact us.

Delivery worldwide, dealer inquiries welcome.

Custom-built and special equipment available on request—contact us!

Images are sample images. For up-to-date pictures, please contact us at:
+49 (0)2723 717 611-0 or by email: anfrage(at)altro-tec.de

Please note that we can only process your inquiry if you provide your name and contact details such as telephone number or email address.

Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.