Matalakuormaaja-puoliperävaunu

HeavyTrailer 3-Achs-Plateau-Containeraufnahmen

Chassis:
- Chassis frame construction made of welded longitudinal beams and inserted cross members
- Outer frame as UNP profile
- 4 pairs of container locks with retractable pivot pin for 1x 20ft centered, 2x 20ft or 1x 40ft
- 2" king pin, interchangeable
- 6 pairs of stake pockets (80x50x4) in the outer frame
- 6 stanchion pockets in the center of the chassis
- Continuous lashing eyelet strip in the outer frame
- Front wall (height approx. 1,200 mm), aluminum profiles framed in steel, bolt-on design

Support winches:
- 24 to. Telescopic support structure with single-sided operation and semi-circular with base plate

Axles/tyres:
- 3 axles á 8 tons (technically 9 tons)
- Disc brake (430 or 4309)
- Air suspension, total lift approx. 180 mm
- Lifting and lowering device with a rotary slide valve
- Tires: 6-ply - 385/65 R 22.5

Brake system:
- EBS brake system 4S/3M
- WABCO ECAS/Optilevel system (with eTasc) for semi-trailer/central axle chassis
- 2x approx. 80 l steel air tanks, painted black

Body:
- Body certificate in accordance with DIN EN 12642 A, 16t (free), 27t (belt), 32t (chain) 8111510641-PB1-Z2
- Contour marking for platform trailers

Lighting system:
- 24 volt lighting system with large multifunction light
- License plate illumination
- Position lights front, bottom, white, 1 each right and left (LED)
- 1 pair of lane departure lights
- Rotating beacon holder firmly attached to the rear
- Side marker lights (LED) with reflector
- 15-pin socket at the front
- EBS socket at the front

Floor:
- Hardwood flooring with additional steel profiles throughout

Paint finish:
- Heavy-duty chassis with KTL coating and painted in MB7350 nova gray
- Front wall painted in MB7350 nova gray
- Paint finish axles and landing gear: black
- Paint finish for axle hubs: black/KTL
- Paintwork lamp panel: RAL 9016 traffic white
- Wheel finish; aluminum/silver

Glupvzsj
Accessories:
- Front wall with height approx. 1,200 mm
- ECE marking plate at the rear
- Welded-on underride guard (rectangular tube)
- Access ladder at rear right, foldable and extendable with platform
- 2 wheel chocks with bracket
- 2 rubber bumpers at the rear corners
- Mud flaps at the rear
- Plastic mudguards (180°) above each axle with mud flaps
- Side bumpers on both sides
- Body certificate in accordance with DIN EN 12642A
- WABCO SmartBoard
- Oversize warning signs with holder and sockets
- Plastic stowage box under loading area at rear right
- Bracket for rotating beacon at the rear

Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.